188-9869 WIRING GP-ELECTRONIC CONTROL 12 VOLT, 18 PIN CONNECTOR CANNOT BE USED WITH BRAKE AN ATTACHMENT C9

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 188-9869 WIRING GP-
1. 219-7446 WIRING GP-
2. 219-7446 WIRING GP-
3. 219-7446 WIRING GP-
4. 219-7446 WIRING GP-
5. 220-7154 WIRING GP-
6. 220-7154 WIRING GP-
7. 221-2320 WIRING GP-
8. 221-2320 WIRING GP-
9. 221-2320 WIRING GP-
0. INFORMATION

TRUCK ENGINE C9 TRUCK ENGINE 9DG
C9 Truck Engine 9DG00001-UP SEBP3028 C9 9DG (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

276-8548 SENSOR GP-PRESSURE

276-9067 SENSOR GP-PRESSURE

188-9869 WIRING GP-ELECTRONIC CONTROL

219-7446 WIRING GP-ELECTRONIC CONTROL

#SEBP30280820

188-9869: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

188-9869 WIRING GP-ELECTRONIC CONTROL
12 VOLT, 18 PIN CONNECTOR
CANNOT BE USED WITH BRAKE
AN ATTACHMENT

i01349254 SEBP3028

1889869 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	003-9835	[1]	PROTECTOR
3.	147-0286	[1]	WIRE AS
4.	175-2303 Y	[1]	SWITCH GP-MAGNETIC (STARTING MOTOR)
	1H-3338	[2]	LOCKWASHER (EXTERNAL TOOTH)
	5C-2890 M	[2]	NUT (M6X1-THD)
	9X-1813 BE		SLEEVE (16CM)
	012-0380	[2]	LOCKWASHER (6.5X12.5X1.6-MM THK)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	150-0375	[6]	RECEPTACLE AS
6.	201-1284	[1]	HARNESS AS (ELECTRONIC CONTROL)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	4P-7428	[1]	CLIP (LADDER)
8.	4P-7429	[1]	CLIP (LADDER)
9.	4P-7581	[4]	CLIP (LADDER)
10.	4P-8134	[1]	CLIP (LADDER)
11.	6V-4369	[1]	CLIP
12.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
13.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
14.	6V-8212 M	[1]	BOLT (M10X1.5X16-MM)
15.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
16.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
21.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280821

219-7446: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

219-7446 WIRING GP-ELECTRONIC CONTROL
S/N 9DG419-436
FOR USE WITH 12 VOLT FRONT MOUNTED AIR INLET HEATER RELAY WITH POWER CABLE ATTACHED TO FRONT POST
ALSO AN ATTACHMENT

i01860880 SEBP3028

2197446 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[17]	STRAP-CABLE
2.	212-7766	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
	3F-9556	[2]	LOCKWASHER
	6V-8186	[2]	NUT-FULL (5/16-24-THD)
	6V-8378	[2]	NUT (10-32-THD)
	8F-1434	[2]	LOCKWASHER
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	219-7445	[1]	CABLE AS (12-VOLT RELAY)(2 AWG)
	8T-8799	[1]	BOOT (RED)
	9X-9120	[1]	BOOT (RED)
	030-1711	[1]	TERMINAL-RING (2-GA, 5/16-IN SCREW)
		[1]	TERMINAL-RING
5.	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	214-7170	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	4P-7429	[1]	CLIP (LADDER)
9.	4P-7581	[1]	CLIP (LADDER)
10.	4P-8134	[3]	CLIP (LADDER)
11.	6V-4369	[1]	CLIP
12.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
13.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
14.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
15.	6V-8212 M	[1]	BOLT (M10X1.5X16-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP30280822

219-7446: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

219-7446 WIRING GP-ELECTRONIC CONTROL
S/N 9DG437-4026
FOR USE WITH 12 VOLT FRONT MOUNTED AIR INLET HEATER RELAY WITH POWER CABLE ATTACHED TO FRONT POST
ALSO AN ATTACHMENT

i01990278 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[16]	STRAP-CABLE
2.	212-7766 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	214-7170	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(ENGINE HARNESS)
5.	236-6234 C	[1]	CABLE AS (2 AWG)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(6CM)
	135-2543	[1]	BOOT (RED)(RED)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
7.	4P-7429	[1]	CLIP (LADDER)
8.	4P-7581 C	[2]	CLIP (LADDER)
9.	4P-8134 C	[2]	CLIP (LADDER)
10.	6V-4369	[1]	CLIP
11.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
12.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
13.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
14.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
17.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280823

219-7446: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

219-7446 WIRING GP-ELECTRONIC CONTROL
S/N 9DG4027-6396
FOR USE WITH 12 VOLT FRONT MOUNTED AIR INLET HEATER RELAY WITH POWER CABLE ATTACHED TO FRONT POST
ALSO AN ATTACHMENT

i02312469 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	212-7766 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	236-6234	[1]	CABLE AS (2-AWG)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM)
	135-2543	[1]	BOOT (RED)(RED)
5.	243-2318 C	[1]	HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE)
	3S-2093	[3]	STRAP-CABLE
	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	100-6674	[2]	SEAL-CONNECTOR
	111-1567	[4]	SOCKET-TERMINAL
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	180-9340	[75]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
	243-2317	[1]	HARNESS AS-SENSOR (FUEL)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	180-9340	[4]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
7.	4P-7429	[1]	CLIP (LADDER)
8.	4P-7581	[2]	CLIP (LADDER)
9.	4P-8134	[2]	CLIP (LADDER)
10.	6V-4369	[1]	CLIP
11.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
12.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
13.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
14.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
17.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280824

219-7446: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

219-7446 WIRING GP-ELECTRONIC CONTROL
S/N 9DG6397-UP
FOR USE WITH 12 VOLT FRONT MOUNTED AIR INLET HEATER RELAY WITH POWER CABLE ATTACHED TO FRONT POST
ALSO AN ATTACHMENT

i02481186 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[17]	STRAP-CABLE
2.	209-5581 CY	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	236-6234	[1]	CABLE AS (2-AWG)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM)
	8T-8799	[1]	BOOT (RED)(RED)
	135-2543	[1]	BOOT (RED)(RED)
5.	266-7691 C	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	3S-2093	[2]	STRAP-CABLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-1567	[4]	SOCKET-TERMINAL
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	116-6161	[1]	CAP-CONNECTOR
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(39-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	211-5358 E		CONDUIT-FLEXIBLE (227-CM)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
6.	283-1226 C	[1]	BRACKET AS
7.	208-9277 CM	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
8.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7429	[1]	CLIP (LADDER)
10.	4P-7581	[2]	CLIP (LADDER)
11.	4P-8134	[2]	CLIP (LADDER)
12.	6V-4369	[1]	CLIP
13.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
14.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
15.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
16.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280825

220-7154: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

220-7154 WIRING GP-ELECTRONIC CONTROL
S/N 9DG1821-6405
24-VOLT
ALSO AN ATTACHMENT

i02052243 SEBP3028

2207154 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-3374	[1]	WASHER (10.3X31.8X12.7-MM THK)
2.	3S-2093 C	[15]	STRAP-CABLE
4.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
5.	243-2318	[1]	HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE)
	3S-2093	[3]	STRAP-CABLE
	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)(ELECTRONIC CONTROL MODULE)
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[32]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	243-2317	[1]	HARNESS AS-SENSOR (FUEL SENSOR)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
7.	236-6235	[1]	CABLE AS
8.	3E-4353	[1]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7581	[1]	CLIP (LADDER)
10.	4P-8134	[3]	CLIP (LADDER)
11.	6V-3822 M	[1]	BOLT (M10X1.5X35-MM)
12.	6V-4369	[1]	CLIP
13.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
17.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
18.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280826

220-7154: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

220-7154 WIRING GP-ELECTRONIC CONTROL
S/N 9DG6406-UP
24-VOLT
ALSO AN ATTACHMENT

i02501315 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-3374	[1]	WASHER (10.3X31.8X12.7-MM THK)
2.	3S-2093 C	[15]	STRAP-CABLE
3.	209-5582 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
4.	215-3249 Y	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
5.	219-7430	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	308-8161	[1]	COVER-TERMINAL
	316-5240	[1]	COVER-TERMINAL
6.	266-7691 C	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	3S-2093	[2]	STRAP-CABLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-1567	[4]	SOCKET-TERMINAL
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(39-CM)
	126-1774	[1]	COVER-CONNECTOR
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	211-5358 E		CONDUIT-FLEXIBLE (227-CM)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
7.	283-1226	[1]	BRACKET AS
8.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
9.	3E-4353	[1]	WASHER-HARD (11X25X3-MM THK)
10.	4P-7581	[1]	CLIP (LADDER)
11.	4P-8134	[3]	CLIP (LADDER)
12.	6V-3822 M	[1]	BOLT (M10X1.5X35-MM)
13.	6V-4369	[1]	CLIP
14.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
15.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
16.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280827

221-2320: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

221-2320 WIRING GP-ELECTRONIC CONTROL
S/N 9DG1-457
12 VOLT
CANNOT BE USED WITH BRAKE GP ENGINES
AN ATTACHMENT

i01860852 SEBP3028

2212320 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[17]	STRAP-CABLE
2.	212-7766 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)(ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	155-2269	[4]	PLUG AS-CONNECTOR (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
5.	236-6233	[1]	CABLE AS (12 VOLT RELAY)
5A.	135-2543	[1]	BOOT (RED)
5B.	198-9562	[1]	COVER-TERMINAL (RED)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	4P-7429	[1]	CLIP (LADDER)
9.	4P-7581	[2]	CLIP (LADDER)
10.	4P-8134	[2]	CLIP (LADDER)
11.	6V-4369	[1]	CLIP
12.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
13.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
14.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
15.	6V-8212 M	[1]	BOLT (M10X1.5X16-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280828

221-2320: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

221-2320 WIRING GP-ELECTRONIC CONTROL
S/N 9DG549-4028
12 VOLT
CANNOT BE USED WITH BRAKE GP ENGINES
ALSO AN ATTACHMENT

i02010875 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	212-7766 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)(ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	155-2269	[4]	PLUG AS-CONNECTOR (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
5.	236-6233	[1]	CABLE AS (12 VOLT RELAY)
5A.	135-2543	[1]	BOOT (RED)
5B.	198-9562	[1]	COVER-TERMINAL (RED)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7429	[1]	CLIP (LADDER)
9.	4P-7581	[2]	CLIP (LADDER)
10.	4P-8134	[2]	CLIP (LADDER)
11.	6V-4369	[1]	CLIP
12.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
14.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30280829

221-2320: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

221-2320 WIRING GP-ELECTRONIC CONTROL
S/N 9DG4029-6391
12 VOLT
CANNOT BE USED WITH BRAKE GP ENGINES
ALSO AN ATTACHMENT

i02312468 SEBP3028

For full view, you need register

Parts for your C9 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	212-7766 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	236-6233	[1]	CABLE AS (12-VOLT RELAY)
	135-2543	[1]	BOOT (RED)
	198-9562	[1]	COVER-TERMINAL (RED)
5.	243-2318 C	[1]	HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE)
	3S-2093	[3]	STRAP-CABLE
	221-2319	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	100-6674	[2]	SEAL-CONNECTOR
	111-1567	[4]	SOCKET-TERMINAL
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	180-9340	[75]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
	243-2317	[1]	HARNESS AS-SENSOR (FUEL)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	180-9340	[4]	SOCKET-CONNECTOR (14-GA TO 18-GA)
			(EACH INCLUDES)
	194-5226	[1]	WIRE AS (16-GA)
			-OR-
	194-5227	[1]	WIRE AS (14-GA)
6.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
7.	4P-7429	[1]	CLIP (LADDER)
8.	4P-7581	[2]	CLIP (LADDER)
9.	4P-8134	[2]	CLIP (LADDER)
10.	6V-4369	[1]	CLIP
11.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
12.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
13.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
14.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
17.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Truck Engine News

A Special Instruction, REHS1809 , "Installation Procedure for 156-7106 Injector Wiring Harness Kit " {1254, 1290, 1408}
2003/12/01

A Wiring Harness Kit is Now Available {1290, 1408}
2004/05/01

A New Wiring Harness Kit Is Available in Order to Make Repairs on Certain Truck Engines {1254, 1290, 1408}
2011/01/10

Operation and Maintenance Manual

Grounding Stud - Inspect/Clean/Tighten
C9 On-highway Engines

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}

AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR INLET HEATER RELAY AND WIRING ON CERTAIN C9 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR INLET HEATER RELAY AND WIRING ON CERTAIN C9 TRUCK ENGINES

Service Letter-Truck/Ag/Marine

Specifications

Switches
On-Highway Engines Electronic PTO Installation and Application Guide

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9 On-Highway Engines

Wiring Harness (Open Circuit) - Test
Product Link 151/201

Electrical Connector - Inspect
Product Link 151/201

Wiring Harness (Short Circuit) - Test
Product Link 151/201

Wiring Harness (Short Circuit) - Test
Product Link - PL102C

Wiring Harness (Open Circuit) - Test
Product Link - PL102C

Electrical Connector - Inspect
Product Link - PL102C

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 On-Highway Engines

Change Oil Lamp Circuit - Test
C7 and C9 On-Highway Engines

Fast Idle Lamp Circuit - Test
C7 and C9 On-Highway Engines

Wait To Start Lamp Circuit - Test
C7 and C9 On-Highway Engines

Cooling Fan Circuit and A/C Compressor Clutch Circuit - Test
C7 and C9 On-Highway Engines

Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
C7 and C9 On-Highway Engines

Sensors and Electrical Connectors
C7 and C9 On-Highway Engines

MID 122 - CID 0269 - FMI 03
Product Link 151/201

MID 122 - CID 0269 - FMI 04
Product Link 151/201

0042-11 Injection Actuation Pressure output fault
C7 and C9 On-Highway Engines

0043-02 Key Switch Fault (71)
C7 and C9 On-Highway Engines

Check Engine Lamp Circuit - Test
C7 and C9 On-Highway Engines

Warning Lamp Circuit - Test
C7 and C9 On-Highway Engines

PTO Switch ON Lamp Circuit - Test
C7 and C9 On-Highway Engines

PTO Switch Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide

PTO Switch ON Lamp Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide

0231-12 J1939 Device Not Responding
On-Highway Engines Electronic PTO Installation and Application Guide

Caterpillar Parts SIS Catalog C9 :

398-0940 SWITCH GP-MAGNETIC

398-0939 SWITCH GP-MAGNETIC

223-4453 SWITCH GP-MAGNETIC

212-7766 SWITCH GP-MAGNETIC

209-5582 SWITCH GP-MAGNETIC

209-5581 SWITCH GP-MAGNETIC

175-2303 SWITCH GP-MAGNETIC

175-2302 SWITCH GP-MAGNETIC

219-7446 WIRING GP-ELECTRONIC CONTROL

220-7154 WIRING GP-ELECTRONIC CONTROL

221-2320 WIRING GP-ELECTRONIC CONTROL