AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

267-2063 CYLINDER HEAD GP S/N 9NZ17815-UP Type 2 C-15 TRUCK ENGINE


BASIC ENGINE
CYLINDER HEAD GP
CYLINDER BLOCK GP
DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-FAN

TRUCK ENGINE C-15 TRUCK ENGINE 6NZ
 C-15 Truck Engine 6NZ00001-UP SEBP3032 C-15 6NZ   (1999)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
557-4756 FASTENER GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
234-5986 PLUG GP-CYLINDER HEAD
 

#SEBP30323440
 

267-2063: CYLINDER HEAD GP

267-2063 CYLINDER HEAD GP
S/N 9NZ17815-UP
Type 2
i04935119 SEBP3032
2672063 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6772 [24] SEAL (WATER)  
2. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
3. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
4. 197-8391 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
5. 241-6186 [1] ELBOW  
6. 281-8261 [6] SLEEVE AS-EXHAUST  
7. 263-5055 Y [1] CYLINDER HEAD GP  
8. 183-3407 C [3] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
9. 194-6724 Y [1] SENSOR GP-PRESSURE (AIR)  
10. 224-5122 [1] GASKET (CYLINDER HEAD)  
11. 5P-0840 [1] SEAL-O-RING  
12. 214-7566 C [1] SEAL-O-RING  
13. 214-7568 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30323441
 

0R-8915: CYLINDER PACK GP

0R-8915 CYLINDER PACK GP
S/N 6NZ1-99999
PART OF 348-7155 PARTS GP-ENGINE OVERHAUL
i02682290 SEBP3032
0R8915 CYLINDER PACK GP Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CROWN AS-PISTON  
2. [1] SKIRT-PISTON  
3. [1] PIN-PISTON  
4. 7E-1177 [2] RETAINER-PIN  
5. 0R-3780 [1] ROD AS-CONNECTING  
5A. 6I-2726 [1] BUSHING  
5B. 7E-4195 M [2] BOLT-CONNECTING ROD (M16X1.5X97-MM)  
  7N-2043 [2] DOWEL  
6. 134-3761 [1] RING-PISTON (TOP)  
7. 176-5749 [1] RING-PISTON (INTERMEDIATE)  
8. 189-9771 [1] RING-PISTON (OIL CONTROL)  
   
  197-9322 F [1] LINER-CYLINDER BLOCK  
   
    AVAILABLE GASKET KIT(S):
  160-9874 [1] KIT-GASKET (SINGLE CYLINDER LINER)  
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP30323442
 

111-8317: DAMPER GP

111-8317 DAMPER GP
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
ALSO AN ATTACHMENT
i00484161 SEBP3032
1118317 DAMPER GP Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30323443
 

147-0857: DRIVE GP-ACCESSORY

147-0857 DRIVE GP-ACCESSORY
PROVIDES 8 RIB POLY-VEE BELT ALTERNATOR/FAN DRIVE WITH 2100 RPM FULL POWER CAPACITY, SEPARATE 6 RIB POLY-VEE BELT DRIVE PROVIDES LIMP HOME CAPABILITY WITH COMPRESSOR SEIZURE
FOR USE WITH @@@@@145-9326@@@@@
ALSO AN ATTACHMENT
i00690417 SEBP3032
1470857 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7023 [1] PULLEY AS-IDLER  
2. 145-9331 [1] SUPPORT-ALTERNATOR  
3. 147-2304 [1] BRACKET  
4. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
4A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
4B. 166-6358 [1] COVER-DUST  
4C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
5. 179-2225 [1] SUPPORT  
6. 190-0642 [1] BELT TENSIONER  
7. 190-0649 [1] BELT TENSIONER  
8. 0S-1573 [2] BOLT (1/2-13X4-IN)  
9. 0S-1594 [1] BOLT (3/8-16X1-IN)  
10. 1A-2029 [3] BOLT (3/8-16X1.125-IN)  
12. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
13. 5B-9603 [6] BOLT (3/8-16X5-IN)  
14. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 6H-1717 [1] BOLT (1/2-13X1.125-IN)  
17. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
18. 8T-0643 M [2] BOLT (M10X1.5X80-MM)  
19. 9H-8260 [1] BOLT (1/2-13X6.25-IN)  
20. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
  M   METRIC PART
 

#SEBP30323444
 

179-3590: DRIVE GP-ACCESSORY

179-3590 DRIVE GP-ACCESSORY
S/N 6NZ1-90822
PROVIDES AN 8 RIB POLY-VEE ALT/FAN DRIVE WITH 2100 RPM FULL POWER CAPACITY, A SEPARATE 6 RIB POLY-VEE BELT DRIVE PROVIDES LIMP HOME CAPABILITY WITH A/C COMPRESSOR SEIZURE
FOR USE WITH @@@@@145-9326@@@@@, @@@@@180-5167@@@@@
ALSO AN ATTACHMENT
i01181190 SEBP3032
1793590 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7023 [1] PULLEY AS-IDLER  
1A. 151-2898 [1] SPACER (10.4X38.1X20-MM THK)  
1B. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
1C. 166-6358 [1] COVER-DUST  
2. 190-0649 [1] BELT TENSIONER  
3. 190-0642 [1] BELT TENSIONER  
4. 145-9331 [1] SUPPORT-ALTERNATOR  
5. 147-2304 [1] BRACKET  
6. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
6A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
6B. 166-6358 [1] COVER-DUST  
6C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
7. 179-2883 [1] SUPPORT  
8. 0S-1573 [2] BOLT (1/2-13X4-IN)  
9. 0S-1594 [1] BOLT (3/8-16X1-IN)  
10. 1A-2029 [3] BOLT (3/8-16X1.125-IN)  
12. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
13. 5B-9603 [6] BOLT (3/8-16X5-IN)  
14. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 7B-3235 [1] BOLT (1/2-13X1.375-IN)  
17. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
18. 8T-0643 M [2] BOLT (M10X1.5X80-MM)  
19. 2A-1531 [1] BOLT (1/2-13X6.5-IN)  
20. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
  M   METRIC PART
 

#SEBP30323445
 

219-7457: DRIVE GP-ACCESSORY

219-7457 DRIVE GP-ACCESSORY
CANNOT BE USED WITH REFRIGERANT COMPRESSOR
AN ATTACHMENT
i01771715 SEBP3032
2197457 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7023 [1] PULLEY AS-IDLER  
  151-2898 [1] SPACER (10.4X38.1X20-MM THK)  
  151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
  166-6358 [1] COVER-DUST  
2. 145-9331 [1] SUPPORT-ALTERNATOR  
3. 147-2304 [1] BRACKET  
4. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
  151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
  166-6358 [1] COVER-DUST  
  173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
5. 179-2883 [1] SUPPORT  
6. 190-0649 [1] BELT TENSIONER  
7. 0S-1573 [2] BOLT (1/2-13X4-IN)  
8. 0S-1594 [1] BOLT (3/8-16X1-IN)  
9. 1A-2029 [3] BOLT (3/8-16X1.125-IN)  
11. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
12. 5B-9603 [6] BOLT (3/8-16X5-IN)  
13. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6H-1717 [1] BOLT (1/2-13X1.125-IN)  
16. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
17. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
18. 9H-8260 [1] BOLT (1/2-13X6.25-IN)  
19. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
  M   METRIC PART
 

#SEBP30323446
 

108-9365: DRIVE GP-FAN

108-9365 DRIVE GP-FAN
2 FRONT GROOVES FOR 1/2 INCH BELT-2 REAR GROOVES FOR 11/16 INCH BELT, FAN ADAPTER 2 INCH DIAMETER PILOT WITH 3.5 INCH BOLT CIRCLE AND .22 INCH PILOT
AN ATTACHMENT
i00487131 SEBP3032
1089365 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5120 [1] BRACKET  
2. 0S-1594 [2] BOLT (3/8-16X1-IN)  
3. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9N-2116 [1] BRACKET AS-FAN  
  4N-0684 [1] DOWEL  
  9N-1262 [1] SHAFT-FAN  
5. 9N-0337 [1] PULLEY-FAN DRIVE (4-GROOVE)  
6. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
8. 1H-5403 [2] BOLT (5/16-24X2-IN)  
9. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
10. 8H-9789 [2] BALL BEARING  
11. 7F-2122 [1] SEAL-O-RING  
12. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
13. 5S-2106 [1] SEAL-LIP TYPE  
14. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
15. 5L-4398 [3] BOLT (1/2-13X2.25-IN)  
16. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 9N-3721 [1] ADAPTER-FAN MOUNTING  
18. 115-2420 [1] ROD AS-ADJUSTING (FAN DRIVE)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
 

#SEBP30323447
 

108-9366: DRIVE GP-FAN

108-9366 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X 1.14 INCH LONG PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
AN ATTACHMENT
i00487133 SEBP3032
1089366 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5120 [1] BRACKET  
2. 0S-1594 [2] BOLT (3/8-16X1-IN)  
3. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9N-2116 [1] BRACKET AS-FAN  
  4N-0684 [1] DOWEL  
  9N-1262 [1] SHAFT-FAN  
5. 9N-0337 [1] PULLEY-FAN DRIVE (4-GROOVE)  
6. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
8. 9N-2115 [1] ADAPTER-FAN MOUNTING  
9. 1H-5403 [2] BOLT (5/16-24X2-IN)  
10. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
11. 8H-9789 [2] BALL BEARING  
12. 7F-2122 [1] SEAL-O-RING  
13. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
14. 5S-2106 [1] SEAL-LIP TYPE  
15. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
16. 5L-4398 [3] BOLT (1/2-13X2.25-IN)  
17. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 115-2420 [1] ROD AS-ADJUSTING (FAN DRIVE)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
 

#SEBP30323448
 

108-9367: DRIVE GP-FAN

108-9367 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X 1.14 INCH LONG PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT
i00487135 SEBP3032
1089367 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5120 [1] BRACKET  
2. 0S-1594 [2] BOLT (3/8-16X1-IN)  
3. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9N-2116 [1] BRACKET AS-FAN  
  4N-0684 [1] DOWEL  
  9N-1262 [1] SHAFT-FAN  
5. 9N-0337 [1] PULLEY-FAN DRIVE (4-GROOVE)  
6. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
8. 9N-2115 [1] ADAPTER-FAN MOUNTING  
9. 1H-5403 [2] BOLT (5/16-24X2-IN)  
10. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
11. 8H-9789 [2] BALL BEARING  
12. 7F-2122 [1] SEAL-O-RING  
13. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
14. 5S-2106 [1] SEAL-LIP TYPE  
15. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
16. 115-2420 [1] ROD AS-ADJUSTING (FAN DRIVE)  
17. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
 

#SEBP30323449
 

109-1102: DRIVE GP-FAN

109-1102 DRIVE GP-FAN
FAN ADAPTER HAS 2 INCH DIAMETER X .22 INCH LONG EXTERNAL PILOT AND 3.5 INCH BOLT CIRCLE, 2 FRONT GROOVES FOR 1/2 INCH BELT 2 REAR GROOVES FOR 11/16 INCH BELT
FOR USE WITH ALTERNATOR MOUNTING, VISCOUS FAN DRIVE
AN ATTACHMENT
i00488694 SEBP3032
1091102 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your C-15 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5120 [1] BRACKET  
2. 0S-1594 [2] BOLT (3/8-16X1-IN)  
3. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9N-2116 [1] BRACKET AS-FAN  
  4N-0684 [1] DOWEL  
  9N-1262 [1] SHAFT-FAN  
5. 9N-0337 [1] PULLEY-FAN DRIVE (4-GROOVE)  
6. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
7. 1H-5403 [2] BOLT (5/16-24X2-IN)  
8. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
9. 8H-9789 [2] BALL BEARING  
10. 7F-2122 [1] SEAL-O-RING  
11. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
12. 5S-2106 [1] SEAL-LIP TYPE  
13. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
14. 9N-3721 [1] ADAPTER-FAN MOUNTING  
15. 115-2420 [1] ROD AS-ADJUSTING (FAN DRIVE)  
16. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
17. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
 

Information:

Truck Engine News
Be Sure To Order The Correct Remanufactured Cylinder Head {1100}
2001/02/01
An Improved Exhaust Sleeve Assembly is Now Used on Certain On-Highway Engines {1059, 1100}
2005/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/01
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/11/01
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
2015/05/18
A New Head Gasket Is Used On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Engine News
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3406E, C-10, C-12, C-15, C-16 Truck Engines
Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3406E, C-10, C-12, C-15, C-16 Truck Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Specifications
Cylinder Head
C-15, C-16, and C-18 Truck Engines
Cylinder Head Valves
C-15, C-16, and C-18 Truck Engines
Cylinder Head Valves
C-15, C-16, and C-18 Truck Engines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
LOWER COST C-15 & C15 ACERT REMAN CYLINDER HEAD OPTIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
C-15, C-16 and C-18 Truck Engines
Electronic Unit Injector Sleeve - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Install
C-15, C-16 and C-18 Truck Engines
Cylinder Head - Remove
C-15, C-16 and C-18 Truck Engines
Cylinder Head - Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Guides - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valves - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Seals - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Springs - Remove and Install
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Install
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Remove
C-15, C-16 and C-18 Truck Engines

Caterpillar Parts SIS Catalog C-15 :

CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
CYLINDER HEAD GP
267-2060 CYLINDER HEAD GP
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER PACK GP
0R-8915 CYLINDER PACK GP
DAMPER GP
111-8317 DAMPER GP
DRIVE GP-ACCESSORY
147-0857 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
179-3590 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
219-7457 DRIVE GP-ACCESSORY
DRIVE GP-FAN
108-9365 DRIVE GP-FAN
DRIVE GP-FAN
108-9366 DRIVE GP-FAN
DRIVE GP-FAN
108-9367 DRIVE GP-FAN

Truck sale:

Caterpillar C15, Construction
96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.