AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPLINES GP-AIR
MANIFOLD GP-EXHAUST
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
#SEBP30323890
424-8379: KIT-TURBOCHARGER GASKET
424-8379 KIT-TURBOCHARGER GASKET
S/N 6NZ1-99999
CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC
FIELD REPLACEMENT FOR 423-7970 KIT-TURBOCHARGER GASKET
FIELD INSTALLATION
S/N 6NZ1-99999
CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC
FIELD REPLACEMENT FOR 423-7970 KIT-TURBOCHARGER GASKET
FIELD INSTALLATION
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 4N-0699 | [1] | GASKET | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 6V-3917 | [2] | SEAL-O-RING | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 228-7091 | [1] | SEAL-O-RING | ||
| 313-9550 | [4] | STUD-TAPERLOCK (3/8-16X2.165-IN) | ||
| FOR A LIST OF RELATED PARTS THAT ARE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP30323891
458-8201: KIT-TURBOCHARGER GASKET
458-8201 KIT-TURBOCHARGER GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOCHARGERS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD INSTALLATION
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOCHARGERS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD INSTALLATION
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP30323892
507-2786: KIT-TURBOCHARGER GASKET
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 6V-6228 | [1] | SEAL-O-RING | ||
| 323-7347 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 136-7226 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP30323893
114-1904: LINES GP-AIR
114-1904 LINES GP-AIR
PROVIDES A 90 DEGREE TURBO COMPRESSOR OUTLET ELBOW
FOR USE WITH 101.6MM (4 INCH) DIAMETER HOSE
ALSO AN ATTACHMENT
PROVIDES A 90 DEGREE TURBO COMPRESSOR OUTLET ELBOW
FOR USE WITH 101.6MM (4 INCH) DIAMETER HOSE
ALSO AN ATTACHMENT
For full view, you need register
#SEBP30323894
114-1905: LINES GP-AIR
114-1905 LINES GP-AIR
PROVIDES 135 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
PROVIDES 135 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
For full view, you need register
#SEBP30323895
114-1906: LINES GP-AIR
114-1906 LINES GP-AIR
PROVIDES 90 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
PROVIDES 90 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
For full view, you need register
#SEBP30323896
114-1907: LINES GP-AIR
114-1907 LINES GP-AIR
S/N 6NZ8937-90822; 9NZ1-UP
PROVIDES 100 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4.5 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
S/N 6NZ8937-90822; 9NZ1-UP
PROVIDES 100 DEGREE TURBOCHARGER COMPRESSOR OUTLET ELBOW
FOR USE WITH 4.5 INCH DIAMETER HOSE
ALSO AN ATTACHMENT
For full view, you need register
#SEBP30323897
4P-5007: MANIFOLD GP-EXHAUST
4P-5007 MANIFOLD GP-EXHAUST
S/N 6NZ1-18290
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
S/N 6NZ1-18290
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-3359 | [2] | MANIFOLD-EXHAUST (END) | |
| 2. | 146-9445 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 3. | 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | |
| 4. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 5. | 138-4611 | [6] | GASKET-EXHAUST | |
| 6. | 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 106-4159 | [1] | SPACER (11.13X19.05X13.5-MM THK) | |
| 8. | 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | |
| 9. | 106-1793 | [1] | STUD-TAPERLOCK (3/8-16X2.36-IN) |
#SEBP30323898
4P-5007: MANIFOLD GP-EXHAUST
4P-5007 MANIFOLD GP-EXHAUST
S/N 6NZ18291-38613
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
S/N 6NZ18291-38613
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-3359 | [2] | MANIFOLD-EXHAUST (END) | |
| 2. | 146-9445 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 3. | 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | |
| 4. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 5. | 109-5313 C | [6] | GASKET | |
| 7. | 106-4159 | [1] | SPACER (11.13X19.05X13.5-MM THK) | |
| 8. | 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | |
| 9. | 106-1793 | [1] | STUD-TAPERLOCK (3/8-16X2.36-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP30323899
4P-5007: MANIFOLD GP-EXHAUST
4P-5007 MANIFOLD GP-EXHAUST
S/N 6NZ38614-99999; 9NZ1-UP
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
S/N 6NZ38614-99999; 9NZ1-UP
FOR USE WITH TURBOCHARGER EXHAUST 12.5 DEGREES BELOW HORIZONTAL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-3359 | [2] | MANIFOLD-EXHAUST (END) | |
| 2. | 146-9445 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 3. | 168-7800 C | [12] | LOCKNUT (3/8-16-THD) | |
| 4. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
| 7. | 106-4159 | [1] | SPACER (11.13X19.05X13.5-MM THK) | |
| 8. | 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | |
| 9. | 106-1793 | [1] | STUD-TAPERLOCK (3/8-16X2.36-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Truck Engine News
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
2003/12/01
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN 3406E, C-15, AND C15 TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN 3406E, C-15, AND C15 TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN 3406E, C-15, AND C15 TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
Service Letter-APD
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
