BASIC ENGINE
CYLINDER HEAD GPDAMPER GP
BASIC ENGINE
CYLINDER HEAD GP#SEBP30330590
223-9250: CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N 7CZ4416-5355
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-3178 CYLINDER HEAD GP
S/N 7CZ4416-5355
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-3178 CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 6I-0928 | [24] | WASHER-SPECIAL | |
3. | 153-7023 | [12] | VALVE-INLET | |
4. | 153-7024 | [12] | VALVE-EXHAUST | |
5. | 163-2478 | [24] | SEAL-VALVE STEM | |
6. | 211-3123 | [24] | SPRING-VALVE (OUTER) | |
7. | 243-6741 CY | [1] | CYLINDER HEAD AS | |
8. | 186-2001 | [24] | ROTOCOIL AS | |
9. | 211-3122 | [24] | SPRING-VALVE (INNER) | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330591
235-3178: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 223-9250 Y | [1] | CYLINDER HEAD GP | |
2. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
3. | 3E-6772 | [24] | SEAL (WATER) | |
4. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
5. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
6. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
7. | 5P-0840 | [1] | SEAL-O-RING | |
8. | 241-6186 | [1] | ELBOW | |
9. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (INTAKE MANIFOLD AIR) | |
10. | 6V-5048 | [1] | SEAL-O-RING | |
11. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (INTAKE MANIFOLD AIR) | |
14. | 6V-5049 | [1] | SEAL-O-RING | |
15. | 183-3408 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
6V-5049 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330592
263-5055: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 6I-0928 | [24] | WASHER-SPECIAL | |
3. | 163-2478 | [24] | SEAL-VALVE STEM | |
4. | 247-9908 | [24] | SPRING-VALVE (OUTER) | |
5. | 281-1640 Y | [1] | CYLINDER HEAD AS | |
6. | 490-7200 | [12] | VALVE-EXHAUST | |
7. | 186-2001 | [24] | ROTOCOIL AS | |
8. | 211-3122 | [24] | SPRING-VALVE (INNER) | |
9. | 490-7198 | [12] | VALVE-INLET | |
Y | SEPARATE ILLUSTRATION |
#SEBP30330593
267-2060: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 6I-0928 | [24] | WASHER-SPECIAL | |
3. | 236-5605 | [12] | VALVE-INLET | |
4. | 153-7024 | [12] | VALVE-EXHAUST | |
5. | 163-2478 | [24] | SEAL-VALVE STEM | |
6. | 211-3123 | [24] | SPRING-VALVE (OUTER) | |
7. | 243-6741 Y | [1] | CYLINDER HEAD AS | |
8. | 186-2001 | [24] | ROTOCOIL AS | |
9. | 211-3122 | [24] | SPRING-VALVE (INNER) | |
Y | SEPARATE ILLUSTRATION |
#SEBP30330594
267-2060: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 6I-0928 | [24] | WASHER-SPECIAL | |
3. | 236-5605 | [12] | VALVE-INLET | |
4. | 153-7024 | [12] | VALVE-EXHAUST | |
5. | 163-2478 | [24] | SEAL-VALVE STEM | |
6. | 211-3123 | [24] | SPRING-VALVE (OUTER) | |
7. | 223-7263 CY | [1] | CYLINDER HEAD AS | |
8. | 186-2001 | [24] | ROTOCOIL AS | |
9. | 211-3122 | [24] | SPRING-VALVE (INNER) | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330595
267-2063: CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
S/N 7CZ5356-5682
S/N 7CZ5356-5682
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-6772 | [24] | SEAL (WATER) | |
2. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
3. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
4. | 130-9811 | [1] | SENSOR GP-TEMPERATURE | |
5. | 241-6186 | [1] | ELBOW | |
6. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
7. | 267-2060 Y | [1] | CYLINDER HEAD GP | |
8. | 183-3408 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
6V-5049 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
9. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (AIR) | |
10. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
12. | 6V-5048 | [1] | SEAL-O-RING | |
13. | 6V-5049 | [1] | SEAL-O-RING | |
14. | 8L-2786 | [1] | SEAL-O-RING | |
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330596
267-2063: CYLINDER HEAD GP
267-2063 CYLINDER HEAD GP
S/N 7CZ5683-5859
S/N 7CZ5683-5859
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-6772 | [24] | SEAL (WATER) | |
2. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
3. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
4. | 197-8391 CY | [1] | SENSOR GP-TEMPERATURE | |
5. | 241-6186 | [1] | ELBOW | |
6. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
7. | 267-2060 Y | [1] | CYLINDER HEAD GP | |
8. | 183-3408 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
6V-5049 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
9. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (AIR) | |
10. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
12. | 6V-5048 | [1] | SEAL-O-RING | |
13. | 6V-5049 | [1] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330597
267-2063: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-6772 | [24] | SEAL (WATER) | |
2. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
3. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
4. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE OIL) | |
5. | 241-6186 | [1] | ELBOW | |
6. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
7. | 263-5055 CY | [1] | CYLINDER HEAD GP | |
8. | 183-3408 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
214-7568 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
9. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (AIR) | |
10. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
12. | 6V-5048 | [1] | SEAL-O-RING | |
13. | 214-7568 | [1] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330598
267-2063: CYLINDER HEAD GP
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-6772 | [24] | SEAL (WATER) | |
2. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
3. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
4. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (ENGINE OIL) | |
5. | 241-6186 | [1] | ELBOW | |
6. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
7. | 263-5055 Y | [1] | CYLINDER HEAD GP | |
8. | 183-3407 C | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
214-7568 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
9. | 194-6724 Y | [1] | SENSOR GP-PRESSURE (AIR) | |
10. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
12. | 214-7566 C | [1] | SEAL-O-RING | |
13. | 214-7568 C | [1] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP30330599
111-8317: DAMPER GP
111-8317 DAMPER GP
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
ALSO AN ATTACHMENT
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
ALSO AN ATTACHMENT
Parts for your C-16 TRUCK ENGINE:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER HEAD GP
Truck Engine News
An Improved Exhaust Sleeve Assembly is Now Used on Certain On-Highway Engines {1059, 1100}
2005/03/01
2005/03/01
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
A New Head Gasket Is Used On Certain Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
New Cylinder Head Bolt Kit is Available for Certain C15 ACERT, C-15, C-16, and 3406E On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Engine News
Operation and Maintenance Manual
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Specifications
Tool Operating Manual
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Information Release Memo
Testing and Adjusting
Disassembly and Assembly