AIR INLET AND EXHAUST SYSTEM
MUFFLER GPAIR CLEANER GP
MANIFOLD GP-EXHAUST
SHUTOFF GP-AIR
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUELCONTROL GP-GOVERNOR
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP#SEBP30350150
160-9631: MUFFLER GP
160-9631 MUFFLER GP -INDUSTRIAL
S/N 8AZ1-UP
8 INCH
FOR USE WITH @@@@@145-5567@@@@@
AN ATTACHMENT
S/N 8AZ1-UP
8 INCH
FOR USE WITH @@@@@145-5567@@@@@
AN ATTACHMENT
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-0857 | [2] | PLUG |
#SEBP30350151
169-2199: MUFFLER GP
169-2199 MUFFLER GP
S/N 8AZ1-UP
PART OF 160-9673, 183-9278, 183-9279, 183-9282 ENCLOSURE GP-GENERATOR
AN ATTACHMENT
S/N 8AZ1-UP
PART OF 160-9673, 183-9278, 183-9279, 183-9282 ENCLOSURE GP-GENERATOR
AN ATTACHMENT
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-2200 | [1] | PIPE-EXHAUST | |
| 2. | 142-2451 | [1] | ADAPTER AS | |
| 3. | 143-3895 | [1] | ELBOW AS | |
| 4. | 169-2201 | [1] | PIPE-EXHAUST | |
| 5. | 169-2157 | [1] | MUFFLER (INDUSTRIAL 6-IN) | |
| 6. | 166-5040 | [1] | MUFFLER (INDUSTRIAL 7-8-IN) | |
| 7. | 8T-4988 | [2] | CLAMP-HOSE | |
| 8. | 169-2174 | [1] | BRACKET | |
| 9. | 183-6646 | [1] | BRACKET | |
| 10. | 143-5878 | [1] | BRACKET (SILENCER SUPPORT) | |
| 11. | 9X-8880 | [16] | BOLT (5/8-11X2-IN) | |
| 12. | 4K-0367 | [16] | NUT-FULL (5/8-11-THD) | |
| 13. | 5P-8247 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 1A-8063 | [8] | BOLT (3/4-10X2.5-IN) | |
| 15. | 2J-3506 | [8] | NUT-FULL (3/4-10-THD) | |
| 16. | 5P-8248 | [16] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 17. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4133 M | [15] | NUT (M10X1.5-THD) | |
| 19. | 8T-4121 | [30] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| 21. | 145-5582 | [1] | CAP AS-RAIN (EXHAUST)(MUFFLER) | |
| 22. | 5H-8331 | [2] | GASKET | |
| 23. | 214-1650 | [1] | GASKET | |
| 24. | 149-7881 | [2] | GUARD | |
| 25. | 8T-7547 M | [10] | BOLT (M8X1.25X30-MM) | |
| 26. | 6V-9189 M | [10] | LOCKNUT (M8X1.25-THD) | |
| 27. | 8T-4224 | [20] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 155-0956 | [1] | SUPPORT | |
| 29. | 169-2158 | [1] | BRACKET | |
| 30. | 178-3571 | [1] | SHIELD-HEAT | |
| 31. | 179-8177 | [1] | KIT-INSULATION | |
| 32. | 113-9543 | [1] | GASKET | |
| M | METRIC PART | |||
#SEBP30350152
150-1714: PRECLEANER GP
150-1714 PRECLEANER GP
S/N 8AZ1-UP
PART OF 160-9607 AIR CLEANER GP
FOR USE WITH 177.8MM DIA INLET TUBE
AN ATTACHMENT
S/N 8AZ1-UP
PART OF 160-9607 AIR CLEANER GP
FOR USE WITH 177.8MM DIA INLET TUBE
AN ATTACHMENT
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS#SEBP30350153
124-0657: SHIELD GP-MANIFOLD
124-0657 SHIELD GP-MANIFOLD
S/N 1MZ1-UP
S/N 1MZ1-UP
#SEBP30350154
143-3880: SHUTOFF GP-AIR
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS#SEBP30350155
134-8448: TURBOCHARGER GP
134-8448 TURBOCHARGER GP
S/N 1MZ1-UP
S/N 1MZ1-UP
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS#SEBP30350156
134-8449: TURBOCHARGER GP
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS#SEBP30350157
165-5630: BASE GP-FUEL FILTER
165-5630 BASE GP-FUEL FILTER
S/N 1MZ1-1423
PART OF 159-7324 PUMP GP-FUEL PRM & SEC FILTER
S/N 1MZ1-1423
PART OF 159-7324 PUMP GP-FUEL PRM & SEC FILTER
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-5017 | [1] | BASE AS-FUEL FILTER | |
| 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | ||
| 2. | 139-6873 Y | [1] | VALVE GP-FUEL BYPASS (FILTER) | |
| 3. | 156-5783 CY | [1] | VALVE GP-CHECK (DIFFERENTIAL PRESSURE) | |
| 4. | 6V-4589 | [2] | SEAL-O-RING | |
| 5. | 102-2240 | [1] | SENSOR GP-TEMPERATURE (3-PIN)(FUEL) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 | [1] | SLEEVE | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 143-2933 | [1] | FITTING | |
| 7. | 8L-2786 | [2] | SEAL-O-RING | |
| 8. | 8L-2779 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30350158
165-5630: BASE GP-FUEL FILTER
165-5630 BASE GP-FUEL FILTER
S/N 1MZ1424-UP
PART OF 159-7324 PUMP GP-FUEL PRM & SEC FILTER
S/N 1MZ1424-UP
PART OF 159-7324 PUMP GP-FUEL PRM & SEC FILTER
Parts for your 3406E GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-5017 | [1] | BASE AS-FUEL FILTER | |
| 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | ||
| 2. | 139-6873 Y | [1] | VALVE GP-FUEL BYPASS (FILTER) | |
| 3. | 233-6742 CY | [1] | VALVE GP-CHECK (FUEL)(DIFFERENTIAL PRESSURE) | |
| 4. | 6V-4589 C | [1] | SEAL-O-RING | |
| 5. | 102-2240 | [1] | SENSOR GP-TEMPERATURE (3-PIN)(FUEL) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 143-2933 | [1] | FITTING | |
| 7. | 8L-2786 | [2] | SEAL-O-RING (16.36MM ID) | |
| 8. | 8L-2779 | [1] | SEAL-O-RING (9.25MM ID) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30350159
154-5504: CONTROL GP-GOVERNOR
154-5504 CONTROL GP-GOVERNOR
S/N 8AZ1-UP
PWM CONVERTER, SPEED DROOP
FOR USE WITH DIGITAL ELECTRONIC GOVERNING SYSTEM
AN ATTACHMENT
S/N 8AZ1-UP
PWM CONVERTER, SPEED DROOP
FOR USE WITH DIGITAL ELECTRONIC GOVERNING SYSTEM
AN ATTACHMENT
Parts for your 3406E GENERATOR SET:
CATERPILLAR SISInformation:
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
