R1700 G LOAD HAUL DUMP 8XZ00001-UP (MACHINE) POWER TRAIN Caterpillar SIS

LOAD HAUL DUMP R1700G LOAD HAUL DUMP 8XZ
R1700 G LOAD HAUL DUMP 8XZ00001-UP (MACHINE) SEBP3045 R1700G 8XZ (1999)

Parts group R1700G:

For full view, you need register

POWER TRAIN

AXLE GP

162-5507 AXLE AR-FIXED

1625507 - AXLE AR-FIXED
This is part of 1632017 - POWER TRAIN AR

162-5508 AXLE AR-OSCILLATING

1625508 - AXLE AR-OSCILLATING
This is part of 1632017 - POWER TRAIN AR

165-6781 AXLE GP-FIXED

1656781 - AXLE GP-FIXED
This is part of 1625507 - AXLE AR-FIXED

165-6782 AXLE GP-OSCILLATING

1656782 - AXLE GP-OSCILLATING
This is part of 1625508 - AXLE AR-OSCILLATING

179-8332 LINES GP-AXLE VENT

1798332 - LINES GP-AXLE VENT (FIXED)
This is part of 1632017 - POWER TRAIN AR

179-8334 LINES GP-AXLE VENT

1798334 - LINES GP-AXLE VENT (OSCILLATING)
This is part of 1632017 - POWER TRAIN AR

179-9819 MOUNTING GP-AXLE

1799819 - MOUNTING GP-AXLE (FIXED)
This is part of 1632017 - POWER TRAIN AR

179-9818 MOUNTING GP-AXLE

1799818 - MOUNTING GP-AXLE (OSCILLATING)
This is part of 1632017 - POWER TRAIN AR

214-2120 GUARD GP-AXLE

2142120 - GUARD GP-AXLE
AN ATTACHMENT

CONTROL GP-TRANSMISSION HYD

3Q-6242 CONTROL GP-TRANSMISSION HYD

3Q6242 - CONTROL GP-TRANSMISSION HYD
This is part of 1643000 - TRANSMISSION AR

COVER GP-SHIPPING

244-1713 COVER GP-SHIPPING

2441713 - COVER GP-SHIPPING
This is part of 1803568 - TORQUE CONVERTER & UPDRIVE AR

DIFFERENTIAL & BEVEL GEAR GP

219-7996 DIFFERENTIAL & BEVEL GEAR GP

2197996 - DIFFERENTIAL & BEVEL GEAR GP
This is part of 1625507 - AXLE AR-FIXED

219-7997 DIFFERENTIAL & BEVEL GEAR GP

2197997 - DIFFERENTIAL & BEVEL GEAR GP (NOSPIN)
This is part of 1625508 - AXLE AR-OSCILLATING

149-2911 DIFFERENTIAL GP

1492911 - DIFFERENTIAL GP

110-3799 DIFFERENTIAL GP-NOSPIN

1103799 - DIFFERENTIAL GP-NOSPIN
This is part of 1246555 - DIFFERENTIAL GP-NOSPIN

124-6555 DIFFERENTIAL GP-NOSPIN

1246555 - DIFFERENTIAL GP-NOSPIN
This is part of 2197997 - DIFFERENTIAL & BEVEL GEAR GP (NOSPIN)

DRAIN GP

183-9437 DRAIN GP-HIGH SPEED FLUID

1839437 - DRAIN GP-HIGH SPEED FLUID (TRANSMISSION EVACUATION)
AN ATTACHMENT

180-3254 VALVE GP-DRAIN

1803254 - VALVE GP-DRAIN
AN ATTACHMENT

FILLER GP-POWER TRAIN OIL

179-8324 FILLER GP-POWER TRAIN OIL

1798324 - FILLER GP-POWER TRAIN OIL
This is part of 1632017 - POWER TRAIN AR

FILTER GP

221-9424 FILTER GP-OIL

2219424 - FILTER GP-OIL
This is part of 2219429 - COOLER AR-AXLE OIL
MACHINE No 8XZ0299-00415,
PIN 8XZ00299-00415,
AN ATTACHMENT

276-9080 FILTER GP-OIL

2769080 - FILTER GP-OIL
This is part of 2219429 - COOLER AR-AXLE OIL
MACHINE No 8XZ0416 & UP,
PIN 8XZ00416 & UP,

6P-4603 FILTER GP-OIL

6P4603 - FILTER GP-OIL
This is part of 1798465 - LINES GP-TRANSMISSION FILTER

GEAR GP

179-8329 GAUGE GP-OIL LEVEL

1798329 - GAUGE GP-OIL LEVEL
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0231-00239,
PIN 8XZ00231-00239,

191-9452 GAUGE GP-OIL LEVEL

1919452 - GAUGE GP-OIL LEVEL
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0240 & UP,
PIN 8XZ00240 & UP,

164-2999 GEAR & CASE GP-OUTPUT TRANSFER

1642999 - GEAR & CASE GP-OUTPUT TRANSFER
This is part of 1643000 - TRANSMISSION AR

LINES GP-POWER TRAIN OIL

179-8336 LINES GP-SCAVENGE

1798336 - LINES GP-SCAVENGE
This is part of 1632017 - POWER TRAIN AR

179-8463 LINES GP-TORQUE CONVERTER VENT

1798463 - LINES GP-TORQUE CONVERTER VENT
This is part of 1632017 - POWER TRAIN AR

179-8465 LINES GP-TRANSMISSION FILTER

1798465 - LINES GP-TRANSMISSION FILTER
This is part of 1632017 - POWER TRAIN AR

179-8464 LINES GP-TRANSMISSION OIL

1798464 - LINES GP-TRANSMISSION OIL
This is part of 1632017 - POWER TRAIN AR

179-8466 LINES GP-TRANSMISSION OIL

1798466 - LINES GP-TRANSMISSION OIL
This is part of 1632017 - POWER TRAIN AR

179-8467 LINES GP-TRANSMISSION OIL

1798467 - LINES GP-TRANSMISSION OIL (PRESSURE)
This is part of 1632017 - POWER TRAIN AR

179-8468 LINES GP-TRANSMISSION OIL

1798468 - LINES GP-TRANSMISSION OIL (SUCTION)
This is part of 1632017 - POWER TRAIN AR

POWER TRAIN AR

163-2017 POWER TRAIN AR

1632017 - POWER TRAIN AR
This is part of 1632014 - COMMON AR

PUMP GP

137-9895 PUMP & MTG GP-TRANSMISSION

1379895 - PUMP & MTG GP-TRANSMISSION
This is part of 1803568 - TORQUE CONVERTER & UPDRIVE AR

191-9451 PUMP GP-GEAR

1919451 - PUMP GP-GEAR
This is part of 1803843 - PUMP GP-GEAR (TYPE 1)
AN ATTACHMENT

212-0510 PUMP GP-GEAR

2120510 - PUMP GP-GEAR
This is part of 1803843 - PUMP GP-GEAR (TYPE 1)
AN ATTACHMENT

6P-7358 PUMP GP-GEAR

6P7358 - PUMP GP-GEAR
This is part of 6P7361 - PUMP GP-GEAR (SCAVENGE)

6P-7361 PUMP GP-GEAR

6P7361 - PUMP GP-GEAR (SCAVENGE)
This is part of 1798336 - LINES GP-SCAVENGE

180-3843 PUMP GP-GEAR

1803843 - PUMP GP-GEAR
This is part of 1837671 - COOLER AR-AXLE OIL
AN ATTACHMENT

180-3843 PUMP GP-GEAR

1803843 - PUMP GP-GEAR
This is part of 1837671 - COOLER AR-AXLE OIL
AN ATTACHMENT

8E-1217 PUMP GP-GEAR

8E1217 - PUMP GP-GEAR
This is part of 1379895 - PUMP & MTG GP-TRANSMISSION

8E-1217 PUMP GP-GEAR

8E1217 - PUMP GP-GEAR
This is part of 1379895 - PUMP & MTG GP-TRANSMISSION

SHAFT GP

180-0300 SHAFT GP-DRIVE

1800300 - SHAFT GP-DRIVE
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0231-00258,
PIN 8XZ00231-00258,

201-8615 SHAFT GP-DRIVE

2018615 - SHAFT GP-DRIVE
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0259-00366,
PIN 8XZ00259-00366,

259-2718 SHAFT GP-DRIVE

2592718 - SHAFT GP-DRIVE
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0367 & UP,
PIN 8XZ00367 & UP,

6W-4789 SHAFT GP-DRIVE

6W4789 - SHAFT GP-DRIVE
This is part of 1800300 - SHAFT GP-DRIVE

180-0298 UNIVERSAL JOINT GP

1800298 - UNIVERSAL JOINT GP
This is part of 1800300 - SHAFT GP-DRIVE

SLIP JOINT GP

114-5038 SLIP JOINT GP

1145038 - SLIP JOINT GP
This is part of 1800300 - SHAFT GP-DRIVE
MACHINE No 8XZ0231-00366,
PIN 8XZ00231-00366,

180-0299 SLIP JOINT GP

1800299 - SLIP JOINT GP
This is part of 1800300 - SHAFT GP-DRIVE
MACHINE No 8XZ0231-00258,
PIN 8XZ00231-00258,

259-2717 SLIP JOINT GP

2592717 - SLIP JOINT GP
This is part of 2592718 - SHAFT GP-DRIVE
MACHINE No 8XZ0388 & UP,
PIN 8XZ00388 & UP,

TORQUE CONVERTER GP

180-3568 TORQUE CONVERTER & UPDRIVE AR

1803568 - TORQUE CONVERTER & UPDRIVE AR
This is part of 1632017 - POWER TRAIN AR

180-0323 TORQUE CONVERTER & UPDRIVE GP

1800323 - TORQUE CONVERTER & UPDRIVE GP
This is part of 1803568 - TORQUE CONVERTER & UPDRIVE AR

1T-1872 TORQUE CONVERTER GP

1T1872 - TORQUE CONVERTER GP
This is part of 1800323 - TORQUE CONVERTER & UPDRIVE GP

TRANSMISSION GP

3Q-6214 CASE & PARTS GP-PLANETARY

3Q6214 - CASE & PARTS GP-PLANETARY
This is part of 1643000 - TRANSMISSION AR

164-4239 CONVERSION AR-TRANSMISSION

1644239 - CONVERSION AR-TRANSMISSION
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0231-00258,
PIN 8XZ00231-00258,

201-8617 CONVERSION AR-TRANSMISSION

2018617 - CONVERSION AR-TRANSMISSION
This is part of 1632017 - POWER TRAIN AR
MACHINE No 8XZ0259 & UP,
PIN 8XZ00259 & UP,

3Q-6019 PLANETARY GP

3Q6019 - PLANETARY GP
This is part of 1643000 - TRANSMISSION AR

3Q-6019 PLANETARY GP

3Q6019 - PLANETARY GP
This is part of 1643000 - TRANSMISSION AR

180-2646 SUPPORT GP-TRANSMISSION

1802646 - SUPPORT GP-TRANSMISSION
This is part of 1644239 - CONVERSION AR-TRANSMISSION
MACHINE No 8XZ0231-00258,
PIN 8XZ00231-00258,

180-3263 SUPPORT GP-TRANSMISSION

1803263 - SUPPORT GP-TRANSMISSION
This is part of 1632019 - CHASSIS AR
MACHINE No 8XZ0231-00258,
PIN 8XZ00231-00258,

201-8178 SUPPORT GP-TRANSMISSION

2018178 - SUPPORT GP-TRANSMISSION
This is part of 1632019 - CHASSIS AR
MACHINE No 8XZ0259 & UP,
PIN 8XZ00259 & UP,

201-8613 SUPPORT GP-TRANSMISSION

2018613 - SUPPORT GP-TRANSMISSION
This is part of 2018617 - CONVERSION AR-TRANSMISSION
MACHINE No 8XZ0259 & UP,
PIN 8XZ00259 & UP,

164-3000 TRANSMISSION AR

1643000 - TRANSMISSION AR
This is part of 1644239 - CONVERSION AR-TRANSMISSION

VALVE GP-RELIEF

8P-1471 VALVE GP-RELIEF

8P1471 - VALVE GP-RELIEF
This is part of 1803568 - TORQUE CONVERTER & UPDRIVE AR

VALVE GP-SELECTOR

8E-5158 VALVE GP-SELECTOR

8E5158 - VALVE GP-SELECTOR
This is part of 3Q6243 - VALVE GP-TRANSMISSION CONTROL (TYPE 1)

VALVE GP-SELECTOR & PRESS CONT

109-9538 VALVE GP-SELECTOR & PRESS CONT

1099538 - VALVE GP-SELECTOR & PRESS CONT
This is part of 3Q6243 - VALVE GP-TRANSMISSION CONTROL (TYPE 1)

VALVE GP-SOLENOID

201-1550 VALVE GP-SOLENOID

2011550 - VALVE GP-SOLENOID
This is part of 3E0061 - VALVE GP-SOLENOID

3E-0061 VALVE GP-SOLENOID

3E0061 - VALVE GP-SOLENOID
This is part of 3Q6243 - VALVE GP-TRANSMISSION CONTROL (TYPE 1)

VALVE GP-TRANSMISSION CONTROL

3Q-6242 CONTROL GP-TRANSMISSION HYD

3Q6242 - CONTROL GP-TRANSMISSION HYD
This is part of 1643000 - TRANSMISSION AR

3Q-6243 VALVE GP-TRANSMISSION CONTROL

3Q6243 - VALVE GP-TRANSMISSION CONTROL
This is part of 3Q6242 - CONTROL GP-TRANSMISSION HYD

3Q-6243 VALVE GP-TRANSMISSION CONTROL

3Q6243 - VALVE GP-TRANSMISSION CONTROL
This is part of 3Q6242 - CONTROL GP-TRANSMISSION HYD

WHEEL GP

123-5925 MOUNTING GP-RIM

1235925 - MOUNTING GP-RIM
This is part of 1803845 - RIM AR

180-3845 RIM AR

1803845 - RIM AR
This is part of 1632019 - CHASSIS AR

257-4659 RIM AR

2574659 - RIM AR (5-PIECE)
AN ATTACHMENT
FOR USE WITH TIRES WITH TUBES

180-3844 RIM GP-DEMOUNTABLE

1803844 - RIM GP-DEMOUNTABLE
This is part of 1803845 - RIM AR

257-4657 RIM GP-DEMOUNTABLE

2574657 - RIM GP-DEMOUNTABLE (5-PIECE)
This is part of 2574659 - RIM AR (5-PIECE)
AN ATTACHMENT
FOR USE WITH TIRES WITH TUBES

180-3252 TIRE GP

1803252 - TIRE GP
AN ATTACHMENT
26.5 X 25 X MINE D2 RADIAL

180-3253 TIRE GP

1803253 - TIRE GP
AN ATTACHMENT
26.5 X 25 STMS SLICKS 36 PLY

183-9439 TIRE GP

1839439 - TIRE GP
AN ATTACHMENT
26.5 X 25 D LUG TL D2A 36 PLY

183-9440 TIRE GP

1839440 - TIRE GP
AN ATTACHMENT
26.5 X 25 VSDL D LUG 2 STAR RADIAL

183-9441 TIRE GP

1839441 - TIRE GP
AN ATTACHMENT
26.5 X 25 VSMS SLICK 2 STAR RADIAL

191-9448 TIRE GP

1919448 - TIRE GP
AN ATTACHMENT
26.5 X 25 STMS D2V 36 PLY SLICK

232-0940 TIRE GP

2320940 - TIRE GP
AN ATTACHMENT
26.5 X 25 RL5K L5 6S ROCK LUG

253-6806 TIRE GP

2536806 - TIRE GP
AN ATTACHMENT
26.5X25 XSM D2 L5S

257-4658 TUBE GP-TIRE

2574658 - TUBE GP-TIRE
This is part of 2574659 - RIM AR (5-PIECE)
AN ATTACHMENT

172-4827 WHEEL AR-FINAL DRIVE & BRAKE

1724827 - WHEEL AR-FINAL DRIVE & BRAKE
This is part of 1625507 - AXLE AR-FIXED

264-4688 WHEEL GP-FINAL DRIVE

2644688 - WHEEL GP-FINAL DRIVE
AN ATTACHMENT

162-2526 WHEEL GP-FINAL DRIVE

1622526 - WHEEL GP-FINAL DRIVE
This is part of 1724827 - WHEEL AR-FINAL DRIVE & BRAKE

162-2526 WHEEL GP-FINAL DRIVE

1622526 - WHEEL GP-FINAL DRIVE
This is part of 1724827 - WHEEL AR-FINAL DRIVE & BRAKE

COOLER GP

145-1740 COOLER GP-TRANSMISSION OIL

1451740 - COOLER GP-TRANSMISSION OIL
This is part of 1451730 - ENGINE AR-COMPLETE
ENGINE S/N 7ZR05368 & UP

DRIVE GP-FINAL

179-7412 MOUNTING GP-FINAL DRIVE

1797412 - MOUNTING GP-FINAL DRIVE (FIXED)
This is part of 1625507 - AXLE AR-FIXED

179-6665 MOUNTING GP-FINAL DRIVE

1796665 - MOUNTING GP-FINAL DRIVE (OSCILLATING)
This is part of 1625508 - AXLE AR-OSCILLATING

172-4827 WHEEL AR-FINAL DRIVE & BRAKE

1724827 - WHEEL AR-FINAL DRIVE & BRAKE
This is part of 1625507 - AXLE AR-FIXED

264-4688 WHEEL GP-FINAL DRIVE

2644688 - WHEEL GP-FINAL DRIVE
AN ATTACHMENT

162-2526 WHEEL GP-FINAL DRIVE

1622526 - WHEEL GP-FINAL DRIVE
This is part of 1724827 - WHEEL AR-FINAL DRIVE & BRAKE

162-2526 WHEEL GP-FINAL DRIVE

1622526 - WHEEL GP-FINAL DRIVE
This is part of 1724827 - WHEEL AR-FINAL DRIVE & BRAKE

Information:

(For parts list, see above)

POWER TRAIN

ACCUMULATOR GP

Special Instruction

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}

AXLE GP

Operation and Maintenance Manual

Rear Axle Trunnion Bearings - Inspect
R1700G Load Haul Dump

Rear Axle Trunnion Bearings - Lubricate
R1700G Load Haul Dump

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Technical Information Bulletin

Engine is Required to be Running when Checking the Oil Level of the Axle Oil Cooling System on Certain Load Haul Dump Machines {3260}
Engine is Required to be Running when Checking the Oil Level of the Axle Oil Cooling System on Certain Load Haul Dump Machines {3260}

Specifications

Fixed Axle (Front)
R1700G L.H.D. POWER TRAIN

Oscillating Axle (Rear)
R1700G L.H.D. POWER TRAIN

Reuse And Salvage Guidelines

Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Disassembly and Assembly

Fixed Axle (Front) - Remove and Install
R1700G L.H.D. POWER TRAIN

Oscillating Axle (Rear) - Remove and Install
R1700G L.H.D. POWER TRAIN

Trunnion Support (Oscillating Axle, Front) - Remove and Install
R1700G L.H.D. POWER TRAIN

Trunnion Support (Oscillating Axle, Rear) - Remove and Install
R1700G L.H.D. POWER TRAIN

Service Magazine

The Venting System for the Axle has been Revised {3278}
2001/08/06

Installation of Guards Provides Additional Protection for the Duo-Cone Seals {3260, 4050, 7185}
2001/11/12

New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18

New Final Drive Sun Gear Improves Service Life {3278, 4050}
2006/03/13

Correction to Specifications , "Oscillating Axle (Rear)" {3260, 3278}
2008/09/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

BRAKE & DRIVE GP

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

BRAKE & PLANETARY GP

Reuse And Salvage Guidelines

BRAKE GP

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

CLUTCH GP

Reuse And Salvage Guidelines

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

CONTROL GP

Technical Information Bulletin

Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}

CONTROL GP-TRANSMISSION HYD

Operation and Maintenance Manual

Changing Direction and Speed
R1700G Load Haul Dump

Technical Information Bulletin

Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}

Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}
Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}

Specifications

Transmission Hydraulic Control
R1700G L.H.D. POWER TRAIN

Disassembly and Assembly

Transmission Hydraulic Control Valve - Remove
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Correction to Systems Operation Testing and Adjusting , "Torque Converter Hydraulic System - Test and Adjust, ", and Systems Operation Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3030, 3073, 3073}
2010/11/30

CYLINDER GP

Special Instruction

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Bench Test Procedures

Service Magazine

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

DIFFERENTIAL & BEVEL GEAR GP

Operation and Maintenance Manual

Differential and Final Drive Oil (With Axle Oil Cooler) - Change
R1700G Load Haul Dump

Differential and Final Drive Oil (Without Axle Oil Cooler) - Change
R1700G Load Haul Dump

Differential and Final Drive Oil Level (With Axle Oil Cooler) - Check
R1700G Load Haul Dump

Differential and Final Drive Oil Level (Without Axle Oil Cooler) - Check
R1700G Load Haul Dump

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL PINION SHAFT ON CERTAIN 980G WHEEL LOADERS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS AND R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL PINION SHAFT ON CERTAIN 980G WHEEL LOADERS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS AND R1700G LOAD HAUL DUMP MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Differential and Bevel Gear
R1700G L.H.D. POWER TRAIN

Differential Backlash and Bearing Adjustment
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Contamination Control Guidelines

Service Letter-APD

Disassembly and Assembly

Differential and Bevel Gear - Remove
R1700G L.H.D. POWER TRAIN

Differential and Bevel Gear - Disassemble
R1700G L.H.D. POWER TRAIN

Differential and Bevel Gear - Assemble
R1700G L.H.D. POWER TRAIN

Differential and Bevel Gear - Install
R1700G L.H.D. POWER TRAIN

NoSPIN Differential - Disassemble
R1700G L.H.D. POWER TRAIN

NoSPIN Differential - Assemble
R1700G L.H.D. POWER TRAIN

Service Magazine

Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
2002/04/22

Correction to Specifications , "Differential and Bevel Gear" {3256, 3258}
2002/04/22

An Improved Bevel Gear Set is Now Used {3256}
2008/11/17

DIFFERENTIAL GP

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Reuse And Salvage Guidelines

Contamination Control Guidelines

Service Magazine

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

DRIVE GP

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

DRUM GP

345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}

FILLER GP-POWER TRAIN OIL

Contamination Control Guidelines

FILTER GP

Operation and Maintenance Manual

Transmission Oil Filter - Replace
R1700G Load Haul Dump

Specifications

Transmission Oil Filter
R1700G L.H.D. POWER TRAIN

Contamination Control Guidelines

Disassembly and Assembly

Transmission Oil Filter - Remove
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

Filters for the Brake Cooling System are Available {1365, 3067}
2002/04/29

Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07

Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02

New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}

GAUGE GP-OIL LEVEL (DIPSTICK)

Contamination Control Guidelines

GEAR GP

Technical Information Bulletin

Check the Output Transfer Case on Certain Load Haul Dump Machines{3159}
Check the Output Transfer Case on Certain Load Haul Dump Machines{3159}

Specifications

Output Transfer Gears
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Disassembly and Assembly

Output Transfer Gears - Disassemble
R1700G L.H.D. POWER TRAIN

Output Transfer GEars - Assemble
R1700G L.H.D. POWER TRAIN

Service Magazine

Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Correction to Disassembly and Assembly , Output Transfer Gears - Assemble for R1700G Load Haul Dump Machines {3159}
Correction to Disassembly and Assembly , Output Transfer Gears - Assemble for R1700G Load Haul Dump Machines {3159}

GEARBOX GP

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

LINES GP-HYDRAULIC

Special Instruction

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Reuse And Salvage Guidelines

Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}

LINES GP-POWER TRAIN OIL

Special Instruction

Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}

Disassembly and Assembly

Transmission Oil Filter - Remove
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

A New Label for the Transmission Oil Level Gauge and a New Oil Level Checking Procedure is Now Used {3030}
2004/12/20

LINES GP-TRANSMISSION OIL

Reuse And Salvage Guidelines

MOTOR GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Reuse And Salvage Guidelines

Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Bench Test Procedures

POWER TRAIN AR

Special Instruction

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Service Magazine

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

PUMP GP

Special Instruction

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Specifications

Transmission Oil Pump
R1700G L.H.D. POWER TRAIN

Axle Oil Cooling Pump
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

Reuse And Salvage Guidelines

Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Bench Test Procedures

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Disassembly and Assembly

Transmission Oil Pump - Remove
R1700G L.H.D. POWER TRAIN

Transmission Oil Pump - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Pump - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Oil pump - Install
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Remove
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Disassemble
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Assemble
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Install
R1700G L.H.D. POWER TRAIN

Axle Oil Cooling Pump - Remove and Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Revision to Parts Manual for the R1700G LHD {5073}
2000/08/07

A New Axle Oil Cooling Pump with a New Shaft Seal Design is Available {5073}
2002/01/21

A New Temperature Switch is Used for the Axle Oil Cooler System {5073}
2002/09/16

SEAL GP-DUO-CONE

Special Instruction

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Service Magazine

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

SHAFT GP

Operation and Maintenance Manual

Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
R1700G Load Haul Dump

Technical Information Bulletin

Correct Installation Of The Centre Drive Shaft
Correct Installation Of The Centre Drive Shaft

Specifications

Drive Shafts
R1700G L.H.D. POWER TRAIN

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Disassembly and Assembly

Drive Shaft (Front) - Remove and Install
R1700G L.H.D. POWER TRAIN

Carrier Bearing (Driveshaft) - Remove and Install
R1700G L.H.D. POWER TRAIN

Drive Shaft (Centre) - Remove and Install
R1700G L.H.D. POWER TRAIN

Drive Shaft (Upper) - Remove and Install
R1700G L.H.D. POWER TRAIN

Drive Shaft (Rear) - Remove and Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Improved Drive Shaft Bolts Are Now Available {3253}
2000/11/06

Correction to Specifications , "Drive Shafts" {3253}
2000/11/06

Correction to Disassembly and Assembly , "Drive Shaft (Front) - Remove and Install" {3253}
2000/11/06

Correction to Disassembly and Assembly , "Drive Shaft (Rear) - Remove and Install" {3253}
2000/11/06

An Improved Slip Joint is Available {3253}
2001/02/05

Center Drive Shafts with a Non-Greasable Slip Joint Require Inspection at each 1000 Hours of Service {3253}
2001/11/26

Manually Lubricated Replacement Drive Shaft Spider and Bearing Assemblies Are Now Used {3251, 3253}
2004/07/19

Relocating the Grease Fitting Improves the Service Life of the Center Drive Shaft {3253}
2005/05/09

A New Slip Joint is Now Used {3253}
2005/05/09

SLIP JOINT GP

Technical Information Bulletin

Correct Installation Of The Centre Drive Shaft
Correct Installation Of The Centre Drive Shaft

Reuse And Salvage Guidelines

Service Magazine

An Improved Slip Joint is Available {3253}
2001/02/05

Center Drive Shafts with a Non-Greasable Slip Joint Require Inspection at each 1000 Hours of Service {3253}
2001/11/26

Procedure to Rework the Universal Joint on Certain Underground Articulated Trucks and Load Haul Dump Machines {3251, 3253}
Procedure to Rework the Universal Joint on Certain Underground Articulated Trucks and Load Haul Dump Machines {3251, 3253}

TANK GP

Reuse And Salvage Guidelines

Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}

Contamination Control Guidelines

Service Magazine

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05

TOOLS

Truck Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27

Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Special Instruction

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Tool Operating Manual

Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}

362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}

HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}

4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}

Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}

243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}

193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Reuse And Salvage Guidelines

Contamination Control Guidelines

Bench Test Procedures

Service Magazine

New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

TORQUE CONVERTER GP

Operation and Maintenance Manual

Transmission Oil - Change
R1700G Load Haul Dump

Transmission Oil Level - Check
R1700G Load Haul Dump

Specifications

Torque Converter
R1700G L.H.D. POWER TRAIN

Torque Converter Updrive Transfer Gears
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet)
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump
R1700G L.H.D. POWER TRAIN

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}

Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}

Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}

Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}

Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}

Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}

Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}

Bench Test Procedures

Disassembly and Assembly

Relief Valve (Torque Converter Outlet) - Remove
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Disassemble
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Assemble
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Install
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Remove
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Disassemble
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Assemble
R1700G L.H.D. POWER TRAIN

Torque Converter Scavenge Pump - Install
R1700G L.H.D. POWER TRAIN

Torque Converter Updrive Transfer Gearbox - Remove
R1700G L.H.D. POWER TRAIN

Torque Converter Updrive Transfer Gearbox - Disassemble
R1700G L.H.D. POWER TRAIN

Torque Converter - Disassemble
R1700G L.H.D. POWER TRAIN

Torque Converter - Assemble
R1700G L.H.D. POWER TRAIN

Torque Converter Updrive Transfer Gearbox - Assemble
R1700G L.H.D. POWER TRAIN

Torque Converter Updrive Transfer Gearbox - Install
R1700G L.H.D. POWER TRAIN

Engine and Torque Converter Updrive Transfer Gearbox - Remove
R1700 G LOAD HAUL DUMP ENGINE SUPPLEMENT

Engine and Torque Converter Updrive Transfer Gearbox - Install
R1700 G LOAD HAUL DUMP ENGINE SUPPLEMENT

Service Magazine

Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}

Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13

Torque Converter Installation on R1700G Load Haul Dump Machines {3101}
Torque Converter Installation on R1700G Load Haul Dump Machines {3101}

TORQUE DIVIDER GP

Reuse And Salvage Guidelines

Service Magazine

Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13

TRANSMISSION GP

Operation and Maintenance Manual

Changing Direction and Speed
R1700G Load Haul Dump

Transmission Mounts - Inspect
R1700G Load Haul Dump

Transmission Oil - Change
R1700G Load Haul Dump

Transmission Oil Level - Check
R1700G Load Haul Dump

Special Instruction

Technical Information Bulletin

The Transmission Hardware And Software Have Been Revised
The Transmission Hardware And Software Have Been Revised

TRANSMISSION OIL LEVEL - CHECK
TRANSMISSION OIL LEVEL - CHECK

The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033}
The Steering and Transmission Integrated Controls (STIC) May Not Be Operating Correctly{3033}

Specifications

Transmission Planetary
R1700G L.H.D. POWER TRAIN

Transmission Mounting
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}

Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}

Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Contamination Control Guidelines

Bench Test Procedures

Disassembly and Assembly

Transmission Oil Pump - Remove
R1700G L.H.D. POWER TRAIN

Transmission Oil Pump - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Oil Pump - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Oil pump - Install
R1700G L.H.D. POWER TRAIN

Transmission Oil Filter - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Remove
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Install
R1700G L.H.D. POWER TRAIN

Transmission and Output Transfer Gears - Remove
R1700G L.H.D. POWER TRAIN

Transmission Planetary - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Planetary - Assemble
R1700G L.H.D. POWER TRAIN

Transmission and Output Transfer Gears - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

An Improved Slip Joint is Available {3253}
2001/02/05

A New Transmission Support is Available {3002, 3082}
2001/02/19

Revision to Disassembly and Assembly , "Transmission and Output Gears - Install" {3075}
2001/03/19

Revision to Specifications , "Transmission Mounting" {3082}
2001/03/19

A New Label for the Transmission Oil Level Gauge and a New Oil Level Checking Procedure is Now Used {3030}
2004/12/20

Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

A New Lip Seal is Now Used in the Output Transfer Gear Group {3030}
2006/09/11

Improved Output Transfer Gear Case Now Used {3030}
2006/12/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}

VALVE GP

Technical Information Bulletin

TRANSMISSION PRESSURE CONTROL VALVE MANIFOLD
TRANSMISSION PRESSURE CONTROL VALVE MANIFOLD

VALVE GP-FLUID SAMPLING

Truck Engine News

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Engine News

Contamination Control Guidelines

Service Magazine

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

VALVE GP-RELIEF

Specifications

Relief Valve (Torque Converter Outlet)
R1700G L.H.D. POWER TRAIN

Reuse And Salvage Guidelines

Bench Test Procedures

Disassembly and Assembly

Relief Valve (Torque Converter Outlet) - Remove
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Disassemble
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Assemble
R1700G L.H.D. POWER TRAIN

Relief Valve (Torque Converter Outlet) - Install
R1700G L.H.D. POWER TRAIN

VALVE GP-SELECTOR & PRESS CONT

Specifications

Transmission Selector and Pressure Control Valve
R1700G L.H.D. POWER TRAIN

VALVE GP-SHIFT

Technical Information Bulletin

Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}

VALVE GP-SOLENOID

Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}
Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}

Specifications

Transmission Clutch Solenoid Valve
R1700G L.H.D. POWER TRAIN

Service Magazine

A New Coil Assembly is Now Used {5479}
2011/05/04

VALVE GP-TRANSMISSION CONTROL

Technical Information Bulletin

Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}

Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}
Potential Delayed Shift When Quick Shifting {3073, 3167, 5479}

Specifications

Transmission Hydraulic Control
R1700G L.H.D. POWER TRAIN

Disassembly and Assembly

Transmission Hydraulic Control Valve - Remove
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Disassemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Assemble
R1700G L.H.D. POWER TRAIN

Transmission Hydraulic Control Valve - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Correction to Specifications , "Transmission Selector and Pressure Control Valve" for Certain R1700G Load Haul Dump Machines {3073}
2013/08/12

WHEEL & FINAL DRIVE GP

Special Instruction

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Tool Operating Manual

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Contamination Control Guidelines

Service Magazine

New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Procedure to Rework the Final Drives Now Available for Certain R1700G Load Haul Dump Machines {4050}
2013/10/14

WHEEL GP

Operation and Maintenance Manual

Tire Inflation with Nitrogen
R1700G Load Haul Dump

Tire Shipping Pressure
R1700G Load Haul Dump

Tire Inflation Pressure Adjustment
R1700G Load Haul Dump

Tire Inflation - Check
R1700G Load Haul Dump

Special Instruction

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WHEEL SPINDLE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WHEEL SPINDLE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Final Drive and Wheel
R1700G L.H.D. POWER TRAIN

Wheel Bearing Adjustment
R1700G L.H.D. POWER TRAIN

Rim Mounting
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WHEEL SPINDLE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WHEEL SPINDLE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Tire and Rim Assemblies - Remove and Install
R1700G L.H.D. POWER TRAIN

Axle Shaft - Remove and Install
R1700G L.H.D. POWER TRAIN

Final Drive, Brake and Wheel - Remove
R1700G L.H.D. POWER TRAIN

Final Drive Planetary Carrier - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Planetary Carrier - Assemble
R1700G L.H.D. POWER TRAIN

Final Drive and Wheel - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Spindle and Wheel Brakes - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Spindle and Wheel Brakes - Assemble
R1700G L.H.D. POWER TRAIN

Duo-Cone Conventional Seals - Install
R1700G L.H.D. POWER TRAIN

Final Drive and Wheel - Assemble
R1700G L.H.D. POWER TRAIN

Final Drive, Brake and Wheel - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Correction to Operation and Maintenance Manual , "Tire Shipping Pressure" {4203}
2000/11/06

New Recommendations for Tire Size Differences {4203}
2007/03/05

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Correction to Operation and Maintenance Manual , "Tire Shipping Pressure" {4203, 7500}
2010/04/07

An Improved Spindle is Now Used On Certain R1700G Load Haul Dump Machines {4050, 4201}
2011/02/03

Improved Thrust Washer and Wheel Bearing Retainer Now Used on Certain R1700G Load Haul Dump Machines {4050, 4201}
Improved Thrust Washer and Wheel Bearing Retainer Now Used on Certain R1700G Load Haul Dump Machines {4050, 4201}

COOLER GP

Disassembly and Assembly

Transmission Oil Cooler - Remove and Install
R1700 G LOAD HAUL DUMP ENGINE SUPPLEMENT

OIL CHANGE GP-HIGH SPEED

Contamination Control Guidelines

SHAFT GP-PIVOT

Reuse And Salvage Guidelines

PAN GP-TRANSMISSION OIL

Contamination Control Guidelines

DRIVE GP-FINAL

Operation and Maintenance Manual

Differential and Final Drive Oil (With Axle Oil Cooler) - Change
R1700G Load Haul Dump

Differential and Final Drive Oil (Without Axle Oil Cooler) - Change
R1700G Load Haul Dump

Differential and Final Drive Oil Level (With Axle Oil Cooler) - Check
R1700G Load Haul Dump

Differential and Final Drive Oil Level (Without Axle Oil Cooler) - Check
R1700G Load Haul Dump

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}

Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051}
Procedure to Rework the Final Drive Planetary Carrier on R1700G Load Haul Dump Machines {4051}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE COMPONENTS ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE COMPONENTS ON CERTAIN R1700G LOAD HAUL DUMP MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Final Drive and Wheel
R1700G L.H.D. POWER TRAIN

Wheel Bearing Adjustment
R1700G L.H.D. POWER TRAIN

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Contamination Control Guidelines

Service Letter-APD

Disassembly and Assembly

Axle Shaft - Remove and Install
R1700G L.H.D. POWER TRAIN

Final Drive, Brake and Wheel - Remove
R1700G L.H.D. POWER TRAIN

Final Drive Planetary Carrier - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Planetary Carrier - Assemble
R1700G L.H.D. POWER TRAIN

Final Drive and Wheel - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Spindle and Wheel Brakes - Disassemble
R1700G L.H.D. POWER TRAIN

Final Drive Spindle and Wheel Brakes - Assemble
R1700G L.H.D. POWER TRAIN

Duo-Cone Conventional Seals - Install
R1700G L.H.D. POWER TRAIN

Final Drive and Wheel - Assemble
R1700G L.H.D. POWER TRAIN

Final Drive, Brake and Wheel - Install
R1700G L.H.D. POWER TRAIN

Service Magazine

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18

New Final Drive Sun Gear Improves Service Life {3278, 4050}
2006/03/13

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

An Improved Spindle is Now Used On Certain R1700G Load Haul Dump Machines {4050, 4201}
2011/02/03

Procedure to Rework the Final Drives Now Available for Certain R1700G Load Haul Dump Machines {4050}
2013/10/14

Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051}
Improved Planet Pin Retention Now Used on R1700G Load Haul Dump Machines {4051}

Truck sale:

CATERPILLAR R1700G 2012
- UNDERGROUND MINING LOADER
ZEPPELIN POWER SYSTEMS
>

CATERPILLAR R1700G 2018
- UNDERGROUND MINING LOADER
ZEPPELIN RUSSLAND

CATERPILLAR R1700G 2004
- UNDERGROUND MINING LOADER
MADISA - MAQUINAS DIESEL S.A. DE C.V.
- SANTA CATARINA, N.L. - - 66350

CATERPILLAR R 1700 G 2013
- UNDERGROUND MINING LOADER
VOSTOCHNAYA TECHNICA LLC
Russian Federation