AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2498750 - WIRING GP-DOOR (STIC STEER) This is part of 2153300 - OPERATOR AR-ENCLOSED ROPS (STIC STEER) MACHINE No 8XZ0353 & UP, PIN 8XZ00353 & UP, AN ATTACHMENT R1700G


ELECTRICAL AND STARTING SYSTEM
WIRING GP

LOAD HAUL DUMP R1700G LOAD HAUL DUMP 8XZ
 R1700 G LOAD HAUL DUMP 8XZ00001-UP (MACHINE) SEBP3045 R1700G 8XZ   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
160-8405 WIRING GP-CAB
WIRING GP-COMMUNICATION
246-3559 WIRING GP-COMMUNICATION
WIRING GP-DOOR
249-8750 WIRING GP-DOOR
WIRING GP-DOOR
249-9433 WIRING GP-DOOR
WIRING GP-ENGINE
245-3585 WIRING GP-ENGINE
WIRING GP-ENGINE
245-5662 WIRING GP-ENGINE
 

#SEBP30450280
 

249-8750: WIRING GP-DOOR

2498750 - WIRING GP-DOOR (STIC STEER)
This is part of 2153300 - OPERATOR AR-ENCLOSED ROPS (STIC STEER)
MACHINE No 8XZ0353 & UP,
PIN 8XZ00353 & UP,
AN ATTACHMENT
l326789 SEBP3045
2498750 WIRING GP-DOOR Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-8749 [1] HARNESS-AS DOOR  
2. 116-0118 [1] CLIP  
3. 6D-4246 [5] CLIP (19.05MM ID)  
4. 4M-0061 [6] BOLT-PLT (5/16UNC X 3/4)  
5. 8T-4224 [6] WASHER-HARD-PLT (M8)  
6. 3S-2093 [1] STRAP-CABLE (1.75IN DIA)  
7. 115-3072 [1] CLIP AS-CONNECTOR  
  8C-3334 [1] RIVET-TUBULAR  
 

#SEBP30450281
 

249-9433: WIRING GP-DOOR

2499433 - WIRING GP-DOOR (WHEEL STEER)
This is part of 2153299 - OPERATOR AR-ENCLOSED ROPS (WHEEL STEER)
MACHINE No 8XZ0353 & UP,
PIN 8XZ00353 & UP,
AN ATTACHMENT
l326790 SEBP3045
2499433 WIRING GP-DOOR Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-9432 [1] HARNESS-AS DOOR  
2. 6D-4246 [5] CLIP (19.05MM ID)  
3. 4M-0061 [5] BOLT-PLT (5/16UNC X 3/4)  
4. 8T-4224 [5] WASHER-HARD-PLT (M8)  
 

#SEBP30450282
 

245-3585: WIRING GP-ENGINE

2453585 - WIRING GP-ENGINE
This is part of 1632015 - CONVERSION AR-ENGINE
MACHINE No 8XZ0231-00282,
PIN 8XZ00231-00282,
l326791 SEBP3045
2453585 WIRING GP-ENGINE Parts scheme 2453585 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8466 [1] BRACKET  
2. 213-1457 [1] BRACKET AS  
3. 241-8368 Y [1] SWITCH GP-MAGNETIC  
4. 171-2210 [1] CIRCUIT BREAKER AS (80 AMP)  
  253-2111 [2] LOCKWASHER  
  7X-3182 [2] BOLT (1/4UNF X 1/2)  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
5. 186-9697 [2] BUS BAR  
6. 5L-4507 [4] SCREW-MACHINE  
7. 1H-3337 [2] BOLT-PLT (1/4UNC X 7/8)  
8. 8T-4205 [2] WASHER-HARD-PLT (1/4)  
9. 6V-8185 [2] NUT-HARD-PLT (1/4UNC)  
10. 8T-4137 M [2] BOLT (M10 X 1.5 X 20)  
11. 8T-4121 M [2] WASHER-HARD-PLT (M10)  
12. 3S-8665 [2] CLIP (22.22MM ID)  
13. 5M-3062 [3] BOLT-PLT (3/8UNC X 3/4)  
14. 8T-4896 [9] WASHER-HARD (3/8)  
15. 6V-8801 [4] NUT-HARD-PLT (3/8UNC)  
16. 5C-7261 M [1] NUT-HARD-PLT (M8 X 1.25)  
17. 8T-4224 [6] WASHER-HARD-PLT (M8)  
18. 186-9480 [1] HARNESS AS  
19. 110-8213 [1] BRACKET AS  
  6H-0939 C [1] STUD-WELD  
20. 5S-7379 [2] BOLT (3/8UNC X 7/8)  
21. 186-9600 [1] WIRE AS-ALTERNATOR  
22. 7X-0818 M [3] BOLT-PLT (M8 X 1.25 X 45)  
23. 4P-5820 [1] SENSOR GP-SPEED  
  171-5349 C [1] STRAP-MARKER  
  186-3735 [2] PIN-CONNECTOR  
  3E-3364 C [1] RECEPTACLE AS  
  3E-3365 [1] WEDGE  
  9X-1386 [1] SLEEVE (00014 CM )  
24. 8T-4189 M [3] BOLT-PLT (M8 X 1.25 X 20)  
25. 186-9601 [1] WIRE AS-ALTERNATOR TO C/B  
26. 9X-6258 [4] SCREW (NO.6. X 12.7)  
27. 4B-5324 [4] WASHER-PLAIN  
28. 116-0118 [10] CLIP  
29. 8T-4138 M [3] BOLT (M6 X 1.0 X 20)  
30. 5P-4115 [3] WASHER (1/4PANEL)  
31. 4D-9517 [1] CLIP (12.7MM ID)  
32. 4D-6565 [1] WIRE AS-EARTH  
33. 4P-8134 [1] CLIP-LADDER  
34. 3S-3216 [1] BRACKET  
35. 4L-6459 [1] BOLT-PLT (3/8UNC X 2 1/2)  
36. 1K-4649 [1] SPACER  
37. 265-9033 [2] SENSOR GP-SPEED  
    (Each Includes)
  155-2276 [1] WEDGE-PLUG LOCK  
  180-9340 [3] SOCKET-CONNECTOR  
  8L-2786 [1] SEAL-O-RING (16.36MM ID)  
38. 6V-1889 [3] CLIP (28.58MM ID)  
39. 4P-7429 [2] CLIP (26.5MM ID)  
40. 3S-2093 [10] STRAP-CABLE (1.75IN DIA)  
41. 217-0274 [1] HARNESS AS-ENGINE  
  212-4342 [1] SPLICE RECEPTACLE 4X3  
  222-8762 [2] SPLICE PLUG 1X8  
44. 115-3072 [2] CLIP AS-CONNECTOR  
45. 171-2212 [1] CIRCUIT BREAKER AS (105 AMP)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
46. 4E-0718 [1] WIRE AS  
47. 6V-6609 [1] SEAL-O-RING (16.36MM ID)  
48. 102-2240 [2] SENSOR GP-TEMPERATURE  
    (Each Includes)
  186-3735 [3] PIN-CONNECTOR  
  3E-3370 C [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  9X-1813 [1] SLEEVE (00031 CM )  
49. 161-9930 [1] SENSOR GP-PRESSURE (OIL)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1813 [1] SLEEVE (00034 CM )  
50. 3E-2332 [1] ELBOW-90 DEGREE  
51. 6V-5048 [2] SEAL-O-RING (8.92MM ID)  
52. 214-7568 C [2] SEAL-O-RING  
53. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
54. 163-8530 Y [1] SENSOR GP-PRESSURE  
55. 8J-1256 [1] CLIP (12.7MM ID)  
56. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
57. 3E-7448 [1] CONNECTOR  
58. 161-9927 [1] SENSOR GP-PRESSURE (BOOST)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1386 [1] SLEEVE (00034 CM )  
59. 107-8618 [1] SENSOR GP-TEMP (AIR TEMP)  
  102-8803 [1] KIT-RECEPTACLE  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  112-4550 [1] SLEEVE (00031 CM )  
60. 8L-2786 [1] SEAL-O-RING (16.36MM ID)  
61. 2V-3216 [1] CLIP (9.52MM ID)  
62. 9X-0261 [1] ADAPTER (19.05MM HEX)  
74. 234-5283 [2] PLUG-SENSOR RELAY  
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
  C   INDICATES CHANGE
 

#SEBP30450283
 

245-5662: WIRING GP-ENGINE

2455662 - WIRING GP-ENGINE
This is part of 1632015 - CONVERSION AR-ENGINE
MACHINE No 8XZ0283-00298,
PIN 8XZ00283-00298,
l326793 SEBP3045
2455662 WIRING GP-ENGINE Parts scheme 2455662 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8466 [1] BRACKET  
2. 213-1457 [1] BRACKET AS  
3. 241-8368 Y [1] SWITCH GP-MAGNETIC  
4. 171-2210 [1] CIRCUIT BREAKER AS (80 AMP)  
  253-2111 [2] LOCKWASHER  
  7X-3182 [2] BOLT (1/4UNF X 1/2)  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
5. 186-9697 [2] BUS BAR  
6. 5L-4507 [4] SCREW-MACHINE  
7. 1H-3337 [2] BOLT-PLT (1/4UNC X 7/8)  
8. 8T-4205 [2] WASHER-HARD-PLT (1/4)  
9. 6V-8185 [2] NUT-HARD-PLT (1/4UNC)  
10. 8T-4137 M [2] BOLT (M10 X 1.5 X 20)  
11. 8T-4121 M [2] WASHER-HARD-PLT (M10)  
12. 3S-8665 [2] CLIP (22.22MM ID)  
13. 5M-3062 [3] BOLT-PLT (3/8UNC X 3/4)  
14. 8T-4896 [9] WASHER-HARD (3/8)  
15. 6V-8801 [4] NUT-HARD-PLT (3/8UNC)  
16. 5C-7261 M [1] NUT-HARD-PLT (M8 X 1.25)  
17. 8T-4224 [6] WASHER-HARD-PLT (M8)  
18. 186-9480 [1] HARNESS AS  
19. 110-8213 [1] BRACKET AS  
  6H-0939 C [1] STUD-WELD  
20. 5S-7379 [2] BOLT (3/8UNC X 7/8)  
21. 186-9600 [1] WIRE AS-ALTERNATOR  
22. 7X-0818 M [3] BOLT-PLT (M8 X 1.25 X 45)  
23. 4P-5820 [1] SENSOR GP-SPEED  
  171-5349 C [1] STRAP-MARKER  
  186-3735 [2] PIN-CONNECTOR  
  3E-3364 C [1] RECEPTACLE AS  
  3E-3365 [1] WEDGE  
  9X-1386 [1] SLEEVE (00014 CM )  
24. 8T-4189 M [3] BOLT-PLT (M8 X 1.25 X 20)  
25. 186-9601 [1] WIRE AS-ALTERNATOR TO C/B  
26. 9X-6258 [4] SCREW (NO.6. X 12.7)  
27. 4B-5324 [4] WASHER-PLAIN  
28. 116-0118 [10] CLIP  
29. 8T-4138 M [3] BOLT (M6 X 1.0 X 20)  
30. 5P-4115 [3] WASHER (1/4PANEL)  
31. 4D-9517 [1] CLIP (12.7MM ID)  
32. 4D-6565 [1] WIRE AS-EARTH  
33. 4P-8134 [1] CLIP-LADDER  
34. 3S-3216 [1] BRACKET  
35. 4L-6459 [1] BOLT-PLT (3/8UNC X 2 1/2)  
36. 1K-4649 [1] SPACER  
37. 265-9033 C [2] SENSOR GP-SPEED  
    (Each Includes)
  155-2276 [1] WEDGE-PLUG LOCK  
  180-9340 [3] SOCKET-CONNECTOR  
  8L-2786 [1] SEAL-O-RING (16.36MM ID)  
38. 6V-1889 [3] CLIP (28.58MM ID)  
39. 4P-7429 [2] CLIP (26.5MM ID)  
40. 3S-2093 [10] STRAP-CABLE (1.75IN DIA)  
41. 258-9025 [1] HARNESS AS  
  212-4342 [1] SPLICE RECEPTACLE 4X3  
  222-8762 [2] SPLICE PLUG 1X8  
44. 115-3072 [2] CLIP AS-CONNECTOR  
    (Each Includes)
  8C-3334 C [1] RIVET-TUBULAR  
45. 171-2212 [1] CIRCUIT BREAKER AS (105 AMP)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
46. 4E-0718 C [1] WIRE AS  
47. 6V-6609 [1] SEAL-O-RING (16.36MM ID)  
48. 102-2240 [2] SENSOR GP-TEMPERATURE  
    (Each Includes)
  186-3735 [3] PIN-CONNECTOR  
  3E-3370 C [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  9X-1813 [1] SLEEVE (00031 CM )  
49. 161-9930 [1] SENSOR GP-PRESSURE (OIL)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1813 [1] SLEEVE (00034 CM )  
50. 3E-2332 [1] ELBOW-90 DEGREE  
51. 6V-5048 [2] SEAL-O-RING (8.92MM ID)  
52. 214-7568 C [2] SEAL-O-RING  
53. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
54. 163-8530 Y [1] SENSOR GP-PRESSURE  
55. 8J-1256 [1] CLIP (12.7MM ID)  
56. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
57. 3E-7448 [1] CONNECTOR  
58. 161-9927 [1] SENSOR GP-PRESSURE (BOOST)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1386 [1] SLEEVE (00034 CM )  
59. 107-8618 [1] SENSOR GP-TEMP (AIR TEMP)  
  102-8803 [1] KIT-RECEPTACLE  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  112-4550 [1] SLEEVE (00031 CM )  
60. 8L-2786 [1] SEAL-O-RING (16.36MM ID)  
61. 2V-3216 [1] CLIP (9.52MM ID)  
62. 9X-0261 [1] ADAPTER (19.05MM HEX)  
74. 234-5283 [2] PLUG-SENSOR RELAY  
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
  C   INDICATES CHANGE
 

#SEBP30450284
 

245-5664: WIRING GP-ENGINE

2455664 - WIRING GP-ENGINE
This is part of 1632015 - CONVERSION AR-ENGINE
MACHINE No 8XZ0299-00422,
PIN 8XZ00299-00422,
l326795 SEBP3045
2455664 WIRING GP-ENGINE Parts scheme 2455664 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8466 [1] BRACKET  
2. 213-1457 [1] BRACKET AS  
3. 241-8368 Y [1] SWITCH GP-MAGNETIC  
4. 171-2210 [1] CIRCUIT BREAKER AS (80 AMP)  
  253-2111 C [2] LOCKWASHER  
  7X-3182 [2] BOLT (1/4UNF X 1/2)  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
5. 186-9697 [2] BUS BAR  
6. 5L-4507 [4] SCREW-MACHINE  
7. 1H-3337 [2] BOLT-PLT (1/4UNC X 7/8)  
8. 8T-4205 [2] WASHER-HARD-PLT (1/4)  
9. 6V-8185 [2] NUT-HARD-PLT (1/4UNC)  
10. 8T-4137 M [2] BOLT (M10 X 1.5 X 20)  
11. 8T-4121 M [2] WASHER-HARD-PLT (M10)  
12. 3S-8665 [2] CLIP (22.22MM ID)  
13. 5M-3062 [3] BOLT-PLT (3/8UNC X 3/4)  
14. 8T-4896 [9] WASHER-HARD (3/8)  
15. 6V-8801 [4] NUT-HARD-PLT (3/8UNC)  
16. 5C-7261 M [1] NUT-HARD-PLT (M8 X 1.25)  
17. 8T-4224 [6] WASHER-HARD-PLT (M8)  
18. 186-9480 [1] HARNESS AS  
19. 110-8213 [1] BRACKET AS  
  6H-0939 C [1] STUD-WELD  
20. 5S-7379 [2] BOLT (3/8UNC X 7/8)  
21. 186-9600 [1] WIRE AS-ALTERNATOR  
22. 7X-0818 M [3] BOLT-PLT (M8 X 1.25 X 45)  
23. 4P-5820 [1] SENSOR GP-SPEED  
  171-5349 C [1] STRAP-MARKER  
  186-3735 [2] PIN-CONNECTOR  
  3E-3364 C [1] RECEPTACLE AS  
  3E-3365 [1] WEDGE  
  9X-1386 [1] SLEEVE (00014 CM )  
24. 8T-4189 M [3] BOLT-PLT (M8 X 1.25 X 20)  
25. 186-9601 [1] WIRE AS-ALTERNATOR TO C/B  
26. 9X-6258 [4] SCREW (NO.6. X 12.7)  
27. 4B-5324 [4] WASHER-PLAIN  
28. 116-0118 [10] CLIP  
29. 8T-4138 M [3] BOLT (M6 X 1.0 X 20)  
30. 5P-4115 [3] WASHER (1/4PANEL)  
31. 4D-9517 [1] CLIP (12.7MM ID)  
32. 4D-6565 [1] WIRE AS-EARTH  
33. 4P-8134 [1] CLIP-LADDER  
34. 3S-3216 [1] BRACKET  
35. 4L-6459 [1] BOLT-PLT (3/8UNC X 2 1/2)  
36. 1K-4649 [1] SPACER  
37. 265-9033 [2] SENSOR GP-SPEED  
    (Each Includes)
  155-2276 [1] WEDGE-PLUG LOCK  
  180-9340 [3] SOCKET-CONNECTOR  
  8L-2786 [1] SEAL-O-RING (16.36MM ID)  
38. 6V-1889 [3] CLIP (28.58MM ID)  
39. 4P-7429 [2] CLIP (26.5MM ID)  
40. 3S-2093 [10] STRAP-CABLE (1.75IN DIA)  
41. 258-9023 [1] HARNESS AS-ENGINE  
42. 212-4342 [2] SPLICE RECEPTACLE 4X3  
43. 222-8762 [2] SPLICE PLUG 1X8  
44. 115-3072 [2] CLIP AS-CONNECTOR  
    (Each Includes)
  8C-3334 C [1] RIVET-TUBULAR  
45. 171-2212 [1] CIRCUIT BREAKER AS (105 AMP)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
46. 4E-0718 [1] WIRE AS  
47. 6V-6609 [1] SEAL-O-RING (16.36MM ID)  
48. 102-2240 [2] SENSOR GP-TEMPERATURE  
    (Each Includes)
  186-3735 [3] PIN-CONNECTOR  
  3E-3370 C [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  9X-1813 [1] SLEEVE (00031 CM )  
49. 161-9930 [1] SENSOR GP-PRESSURE (OIL)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1813 [1] SLEEVE (00034 CM )  
50. 3E-2332 [1] ELBOW-90 DEGREE  
51. 6V-5048 [2] SEAL-O-RING (8.92MM ID)  
52. 214-7568 C [2] SEAL-O-RING  
53. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
54. 163-8530 Y [1] SENSOR GP-PRESSURE  
55. 8J-1256 [1] CLIP (12.7MM ID)  
56. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
57. 3E-7448 [1] CONNECTOR  
58. 161-9927 [1] SENSOR GP-PRESSURE (BOOST)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1386 [1] SLEEVE (00034 CM )  
59. 107-8618 [1] SENSOR GP-TEMP (AIR TEMP)  
  102-8803 [1] KIT-RECEPTACLE  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  112-4550 [1] SLEEVE (00031 CM )  
60. 8L-2786 [1] SEAL-O-RING (16.36MM ID)  
61. 2V-3216 [1] CLIP (9.52MM ID)  
62. 9X-0261 [1] ADAPTER (19.05MM HEX)  
74. 234-5283 [2] PLUG-SENSOR RELAY  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  M   METRIC PART
 

#SEBP30450285
 

278-1522: WIRING GP-ENGINE

2781522 - WIRING GP-ENGINE
This is part of 1632015 - CONVERSION AR-ENGINE
MACHINE No 8XZ0423 & UP,
PIN 8XZ00423 & UP,
l326797 SEBP3045
2781522 WIRING GP-ENGINE Parts scheme 2781522 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8466 [1] BRACKET  
2. 213-1457 [1] BRACKET AS  
3. 241-8368 Y [1] SWITCH GP-MAGNETIC  
4. 171-2210 [1] CIRCUIT BREAKER AS (80 AMP)  
  253-2111 C [2] LOCKWASHER  
  7X-3182 [2] BOLT (1/4UNF X 1/2)  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
5. 186-9697 [2] BUS BAR  
6. 5L-4507 [4] SCREW-MACHINE  
7. 1H-3337 [2] BOLT-PLT (1/4UNC X 7/8)  
8. 8T-4205 [2] WASHER-HARD-PLT (1/4)  
9. 6V-8185 [2] NUT-HARD-PLT (1/4UNC)  
10. 8T-4137 M [2] BOLT (M10 X 1.5 X 20)  
11. 8T-4121 M [2] WASHER-HARD-PLT (M10)  
12. 3S-8665 [2] CLIP (22.22MM ID)  
13. 5M-3062 [3] BOLT-PLT (3/8UNC X 3/4)  
14. 8T-4896 [9] WASHER-HARD (3/8)  
15. 6V-8801 [4] NUT-HARD-PLT (3/8UNC)  
16. 5C-7261 M [1] NUT-HARD-PLT (M8 X 1.25)  
17. 8T-4224 [6] WASHER-HARD-PLT (M8)  
18. 186-9480 [1] HARNESS AS  
19. 110-8213 [1] BRACKET AS  
  6H-0939 C [1] STUD-WELD  
20. 5S-7379 [2] BOLT (3/8UNC X 7/8)  
21. 186-9600 [1] WIRE AS-ALTERNATOR  
22. 7X-0818 M [3] BOLT-PLT (M8 X 1.25 X 45)  
23. 4P-5820 [1] SENSOR GP-SPEED  
  171-5349 C [1] STRAP-MARKER  
  186-3735 [2] PIN-CONNECTOR  
  3E-3364 C [1] RECEPTACLE AS  
  3E-3365 [1] WEDGE  
  9X-1386 [1] SLEEVE (00014 CM )  
24. 8T-4189 M [3] BOLT-PLT (M8 X 1.25 X 20)  
25. 278-1513 [1] WIRE ASSY-CB TO ALTERNATOR  
26. 9X-6258 [4] SCREW (NO.6. X 12.7)  
27. 4B-5324 [4] WASHER-PLAIN  
28. 116-0118 [10] CLIP  
29. 8T-4138 M [3] BOLT (M6 X 1.0 X 20)  
30. 5P-4115 [3] WASHER (1/4PANEL)  
31. 4D-9517 [1] CLIP (12.7MM ID)  
32. 4D-6565 [1] WIRE AS-EARTH  
33. 4P-8134 [1] CLIP-LADDER  
34. 3S-3216 [1] BRACKET  
35. 4L-6459 [1] BOLT-PLT (3/8UNC X 2 1/2)  
36. 1K-4649 [1] SPACER  
37. 265-9033 [2] SENSOR GP-SPEED  
    (Each Includes)
  155-2276 [1] WEDGE-PLUG LOCK  
  180-9340 [3] SOCKET-CONNECTOR  
  8L-2786 [1] SEAL-O-RING (16.36MM ID)  
38. 6V-1889 [3] CLIP (28.58MM ID)  
39. 4P-7429 [2] CLIP (26.5MM ID)  
40. 3S-2093 [10] STRAP-CABLE (1.75IN DIA)  
41. 258-9023 [1] HARNESS AS-ENGINE  
42. 212-4342 [2] SPLICE RECEPTACLE 4X3  
43. 222-8762 [2] SPLICE PLUG 1X8  
44. 115-3072 [2] CLIP AS-CONNECTOR  
    (Each Includes)
  8C-3334 C [1] RIVET-TUBULAR  
45. 171-2212 [1] CIRCUIT BREAKER AS (105 AMP)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT  
  8T-4205 [2] WASHER-HARD-PLT (1/4)  
46. 4E-0718 [1] WIRE AS  
47. 6V-6609 [1] SEAL-O-RING (16.36MM ID)  
48. 102-2240 [2] SENSOR GP-TEMPERATURE  
    (Each Includes)
  186-3735 [3] PIN-CONNECTOR  
  3E-3370 C [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  9X-1813 [1] SLEEVE (00031 CM )  
49. 161-9930 [1] SENSOR GP-PRESSURE (OIL)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1813 [1] SLEEVE (00034 CM )  
50. 3E-2332 [1] ELBOW-90 DEGREE  
51. 6V-5048 [2] SEAL-O-RING (8.92MM ID)  
52. 214-7568 C [2] SEAL-O-RING  
53. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
54. 163-8530 Y [1] SENSOR GP-PRESSURE  
55. 8J-1256 [1] CLIP (12.7MM ID)  
56. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
57. 3E-7448 [1] CONNECTOR  
58. 161-9927 [1] SENSOR GP-PRESSURE (BOOST)  
  180-9340 [3] SOCKET-CONNECTOR  
  3E-3368 [1] WEDGE-PLUG LOCK  
  9X-1386 [1] SLEEVE (00034 CM )  
59. 107-8618 [1] SENSOR GP-TEMP (AIR TEMP)  
  102-8803 [1] KIT-RECEPTACLE  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  112-4550 [1] SLEEVE (00031 CM )  
60. 8L-2786 [1] SEAL-O-RING (16.36MM ID)  
61. 2V-3216 [1] CLIP (9.52MM ID)  
62. 9X-0261 [1] ADAPTER (19.05MM HEX)  
74. 234-5283 [2] PLUG-SENSOR RELAY  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  M   METRIC PART
 

#SEBP30450286
 

184-1209: WIRING GP-FRONT

1841209 - WIRING GP-FRONT
This is part of 1632020 - ELECTRICAL AR
MACHINE No 8XZ0231-00290,
PIN 8XZ00231-00290,
l326799 SEBP3045
1841209 WIRING GP-FRONT Parts scheme 1841209 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-0269 [1] HARNESS-FRONT FRAME  
2. 4D-7794 [2] CLIP (10.0MM ID)  
3. 9G-9150 [2] CLIP (10.2MM ID)  
4. 5M-3062 [8] BOLT-PLT (3/8UNC X 3/4)  
5. 8T-4896 [17] WASHER-HARD (3/8)  
6. 116-0118 [2] CLIP  
7. 2D-2751 [1] GROMMET  
8. 241-7024 [2] GUARD  
9. 5S-7379 [5] BOLT (3/8UNC X 7/8)  
10. 9M-8406 [2] CLIP (15.8MM ID)  
11. 4L-6454 [1] BOLT (3/8UNC X 1)  
12. 9S-8752 [1] NUT-HARD (3/8UNC)  
13. 3S-2093 C [20] STRAP-CABLE (1.75IN DIA)  
14. 033-8248 C [1] CLIP (11.11MM ID)  
15. 186-9031 C [1] WIRE AS-EARTH  
16. 186-9032 C [2] WIRE AS-EARTH  
17. 7K-6416 [4] GROMMET  
18. 5S-7383 [1] BOLT-PLT (3/8UNC X 1 3/4)  
19. 081-5930 C [1] CABLE AS-CHASSIS  
  C   INDICATES CHANGE
 

#SEBP30450287
 

215-4340: WIRING GP-FRONT

2154340 - WIRING GP-FRONT
This is part of 1632020 - ELECTRICAL AR
MACHINE No 8XZ0291-00326,
PIN 8XZ00291-00326,
l326801 SEBP3045
2154340 WIRING GP-FRONT Parts scheme 2154340 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-9029 [1] HARNESS AS-FRONT FRAME  
2. 4D-7794 [2] CLIP (10.0MM ID)  
3. 9G-9150 [2] CLIP (10.2MM ID)  
4. 5M-3062 [8] BOLT-PLT (3/8UNC X 3/4)  
5. 8T-4896 [17] WASHER-HARD (3/8)  
6. 081-5930 C [1] CABLE AS-CHASSIS  
7. 3P-5414 C [1] GROMMET  
8. 241-7024 [2] GUARD  
9. 5S-7379 [5] BOLT (3/8UNC X 7/8)  
10. 9M-8406 [2] CLIP (15.8MM ID)  
11. 4L-6454 [1] BOLT (3/8UNC X 1)  
12. 6V-8801 C [1] NUT-HARD-PLT (3/8UNC)  
13. 3S-2093 C [20] STRAP-CABLE (1.75IN DIA)  
14. 033-8248 C [1] CLIP (11.11MM ID)  
15. 7K-6416 [4] GROMMET  
16. 5S-7383 [1] BOLT-PLT (3/8UNC X 1 3/4)  
  C   INDICATES CHANGE
 

#SEBP30450288
 

236-1181: WIRING GP-FRONT

2361181 - WIRING GP-FRONT
This is part of 1632020 - ELECTRICAL AR
MACHINE No 8XZ0327-00408,
PIN 8XZ00327-00408,
l326803 SEBP3045
2361181 WIRING GP-FRONT Parts scheme 2361181 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-9030 [1] HARNESS-FRONT FRAME  
2. 4D-7794 [2] CLIP (10.0MM ID)  
3. 9G-9150 [2] CLIP (10.2MM ID)  
4. 5M-3062 [8] BOLT-PLT (3/8UNC X 3/4)  
5. 8T-4896 [17] WASHER-HARD (3/8)  
6. 081-5930 [1] CABLE AS-CHASSIS  
7. 7G-7053 C [1] GROMMET  
8. 241-7024 [2] GUARD  
9. 5S-7379 [5] BOLT (3/8UNC X 7/8)  
10. 9M-8406 [2] CLIP (15.8MM ID)  
11. 4L-6454 [1] BOLT (3/8UNC X 1)  
12. 6V-8801 [1] NUT-HARD-PLT (3/8UNC)  
13. 3S-2093 [20] STRAP-CABLE (1.75IN DIA)  
14. 033-8248 [1] CLIP (11.11MM ID)  
15. 7K-6416 [4] GROMMET  
16. 5S-7383 [1] BOLT-PLT (3/8UNC X 1 3/4)  
17. 116-0118 [1] CLIP  
  C   INDICATES CHANGE
 

#SEBP30450289
 

281-3687: WIRING GP-FRONT

2813687 - WIRING GP-FRONT
This is part of 1632020 - ELECTRICAL AR
MACHINE No 8XZ0409-00420,
PIN 8XZ00409-00420,
l326805 SEBP3045
2813687 WIRING GP-FRONT Parts scheme 2813687 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 281-3686 C [1] HARNESS - FRONT FRAME  
  212-8436 [1] SPLICE RECEPTACLE 1X3  
  213-1435 [1] SPLICE RECEPTACLE 2X3  
2. 4D-7794 [2] CLIP (10.0MM ID)  
3. 9G-9150 [1] CLIP (10.2MM ID)  
4. 5M-3062 [7] BOLT-PLT (3/8UNC X 3/4)  
5. 8T-4896 [17] WASHER-HARD (3/8)  
6. 081-5930 [1] CABLE AS-CHASSIS  
7. 7G-7053 C [1] GROMMET  
8. 241-7024 [2] GUARD  
9. 5S-7379 C [5] BOLT (3/8UNC X 7/8)  
10. 9M-8406 [2] CLIP (15.8MM ID)  
11. 4L-6454 C [2] BOLT (3/8UNC X 1)  
12. 6V-8801 [1] NUT-HARD-PLT (3/8UNC)  
13. 3S-2093 [20] STRAP-CABLE (1.75IN DIA)  
14. 033-8248 [1] CLIP (11.11MM ID)  
15. 7K-6416 [4] GROMMET  
16. 5S-7383 [1] BOLT-PLT (3/8UNC X 1 3/4)  
17. 116-0118 C [3] CLIP  
  C   INDICATES CHANGE
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery - Recycle
R1700G Load Haul Dump
Battery Disconnect Switch
R1700G Load Haul Dump
Engine Shutdown Switch
R1700G Load Haul Dump
Engine Start Switch
R1700G Load Haul Dump
Idle Timer Control (Engine Shutdown) - If Equipped
R1700G Load Haul Dump
Light Switches
R1700G Load Haul Dump
Service Ports
R1700G Load Haul Dump
Backup Alarm
R1700G Load Haul Dump
Autoshift Control (Wheel Steering)
R1700G Load Haul Dump
Autoshift Control (STIC Steering)
R1700G Load Haul Dump
Engine Starting with Jump Start Cables
R1700G Load Haul Dump
Lift Arm Positioner
R1700G Load Haul Dump
Backup Alarm - Test
R1700G Load Haul Dump
Battery, Battery Cable or Battery Disconnect Switch - Replace
R1700G Load Haul Dump
Battery Electrolyte Level - Check
R1700G Load Haul Dump
Fuses - Replace
R1700G Load Haul Dump
Automatic Brake Application System (Low Transmission Oil Pressure) - Test - If Equipped
R1700G Load Haul Dump
Battery Disconnect Switch
R1700G Load Haul Dump
Engine Shutdown Switch
R1700G Load Haul Dump
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Rework Procedure for the Parking Brake Oil Pressure Switch on Certain R1600, R1600G, and R1700G Load Haul Dump Machines{1408, 1435}
Rework Procedure for the Parking Brake Oil Pressure Switch on Certain R1600, R1600G, and R1700G Load Haul Dump Machines{1408, 1435}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Electronic Unit Injector Wiring
R1700G L.H.D. 3176C ENGINE
Coolant Temperature Sensor
R1700G L.H.D. 3176C ENGINE
Fuel Temperature Sensor
R1700G L.H.D. 3176C ENGINE
Boost Pressure Sensor
R1700G L.H.D. 3176C ENGINE
Atmospheric Pressure Sensor
R1700G L.H.D. 3176C ENGINE
Inlet Air Temperature Sensor
R1700G L.H.D. 3176C ENGINE
Speed and Timing Sensor
R1700G L.H.D. 3176C ENGINE
Oil Pressure Sensor
R1700G L.H.D. 3176C ENGINE
Speed Sensor (Transmission)
R1700G L.H.D. POWER TRAIN
Temperature Sensor (Hydraulic Oil)
R1700G LH.D. HYDRAULIC SYSTEMS
Oil Pressure Sensor
R1700G LOAD HAUL DUMP 3176C ENGINE
Speed Sensor (Engine)
R1700G LOAD HAUL DUMP 3176C ENGINE
Electronic Unit Injector Wiring
3176C and 3196 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
Service Letter-Asia
Systems Operation
Senders
Caterpillar Monitoring System
Switches
Caterpillar Monitoring System
Sensors
Caterpillar Monitoring System
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Custom Service Information
254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250}
254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G S/N:8XZ1-UP Load Haul Dump{1408, 4250}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
Testing and Adjusting
Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
Caterpillar Monitoring System
Wiring Harness (Open Circuit) - Test
Caterpillar Monitoring System
Wiring Harness (Short Circuit) - Test
Caterpillar Monitoring System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
Troubleshooting
MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System
Electrical Component and Connector Locations
Caterpillar Monitoring System
Switch Circuits
Caterpillar Monitoring System
Wiring Information
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electrical Connectors - Inspect
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
A New LED is Available for use with the Backlit Rocker Switches that Resist Vibration {1429, 7431}
2000/07/31
An Improved Controller for the Fire Control System is Now Available {7400, 7401}
2000/08/07
Improved Transmission Pressure Switches are Available {1408, 1435}
2000/11/27
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A Relay Improves the Service Life of the Horn {1408, 7402}
2001/02/05
Addition to Specifications , "Engine" {1907}
2001/04/16
An Improved Throttle Control Group is Available {1265, 1276, 1913}
2001/07/09
A New Coolant Level Sensor Is Available {7422}
2001/09/04
The O-Ring Seal Must be Replaced when you Service the Fuel Sender Group {7481, 7857}
2001/09/24
Revision to Specifications , "Power Train" {3175}
2001/09/10
A New Harness Assembly for the Air Conditioner is now Available {1408, 1805, 7320}
2001/12/03
The Main Power Relay Has Improved Sealing {1423}
2009/05/18
A New Parking Brake Switch is Available {1408, 1435}
2003/05/05
A New Ground Cable with Increased Durability is Available {1408}
2004/03/15
Correction to Operation and Maintenance Manual , "Battery Disconnect Switch" {1411}
2004/03/29
Correction to Operation and Maintenance Manual , "Engine Shutdown Switch" {7418}
2004/04/19
Procedure to Disassemble and Assemble the Parking Brake Control Switch {1408}
2004/08/02
Pressure Switches for the Axle Oil Cooling System Are Now Used {1408}
2005/07/04
A New Alternator is Now Used {1405, 1408}
2005/06/20
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
A New Parking Brake Pressure Switch is Now Used {1408, 1435, 1435}
2008/02/04
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Procedure to Rework the Parking Brake Oil Pressure Switch on Certain R1600, R1600G, and R1700G Load Haul Dump Machines {1408, 1435}
2010/12/16
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Correction to Custom Service Information , "254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP<BR> Load Haul Dump" {1408, 4250}
2012/10/11
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}

Caterpillar Parts SIS Catalog R1700G :

WIRING GP-COMMUNICATION
246-3559 WIRING GP-COMMUNICATION
WIRING GP-CAB
160-8405 WIRING GP-CAB
WIRING GP-CAB
269-0330 WIRING GP-CAB
WIRING GP-CAB
237-6106 WIRING GP-CAB
WIRING GP-CAB
221-2123 WIRING GP-CAB
WIRING GP-CAB
208-3376 WIRING GP-CAB
WIRING GP-CAB
183-6460 WIRING GP-CAB
WIRING GP-CAB
184-1208 WIRING GP-CAB
WIRING GP-DOOR
249-9433 WIRING GP-DOOR
WIRING GP-ENGINE
245-3585 WIRING GP-ENGINE
WIRING GP-ENGINE
245-5662 WIRING GP-ENGINE
WIRING GP-ENGINE
245-5664 WIRING GP-ENGINE
WIRING GP-ENGINE
278-1522 WIRING GP-ENGINE
WIRING GP-FRONT
184-1209 WIRING GP-FRONT
WIRING GP-FRONT
215-4340 WIRING GP-FRONT
WIRING GP-FRONT
236-1181 WIRING GP-FRONT

Truck sale:

CATERPILLAR R1700G 2012
 
CATERPILLAR R1700G 2012
- UNDERGROUND MINING LOADER
ZEPPELIN POWER SYSTEMS
>
 
 
CATERPILLAR R1700G 2018
- UNDERGROUND MINING LOADER
ZEPPELIN RUSSLAND
 
 
CATERPILLAR R1700G 2018
- UNDERGROUND MINING LOADER
ZEPPELIN RUSSLAND
 
 
CATERPILLAR R1700G 2004
- UNDERGROUND MINING LOADER
MADISA - MAQUINAS DIESEL S.A. DE C.V.
- SANTA CATARINA, N.L. - - 66350
CATERPILLAR R 1700 G 2013
 
CATERPILLAR R 1700 G 2013
- UNDERGROUND MINING LOADER
VOSTOCHNAYA TECHNICA LLC
Russian Federation
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.