AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1809365 - CYLINDER & SEAL GP-LIFT This is part of 1632018 - HYDRAULIC AR R1700G LOAD HAUL DUMP


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-DRAIN
HYDRAULIC GP

LOAD HAUL DUMP R1700G LOAD HAUL DUMP 8XZ
 R1700 G LOAD HAUL DUMP 8XZ00001-UP (MACHINE) SEBP3045 R1700G 8XZ   (1999)

HYDRAULIC SYSTEM

CYLINDER GP
269-2204 CORROSION AR-PROTECTION
CYLINDER & SEAL GP-EJECTOR
280-9155 CYLINDER & SEAL GP-EJECTOR
CYLINDER & SEAL GP-EJECTOR
281-0433 CYLINDER & SEAL GP-EJECTOR
CYLINDER & SEAL GP-LIFT
180-9365 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-TILT
180-9366 CYLINDER & SEAL GP-TILT
CYLINDER GP-LIFT
269-0354 CYLINDER GP-LIFT
CYLINDER GP-LIFT
141-1974 CYLINDER GP-LIFT
CYLINDER GP-LIFT
141-1974 CYLINDER GP-LIFT
CYLINDER GP-TILT
180-9367 CYLINDER GP-TILT
CYLINDER GP-TILT
269-1719 CYLINDER GP-TILT
 

#SEBP30450620
 

180-9365: CYLINDER & SEAL GP-LIFT

1809365 - CYLINDER & SEAL GP-LIFT
This is part of 1632018 - HYDRAULIC AR
l327193 SEBP3045
1809365 CYLINDER & SEAL GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-1974 Y [1] CYLINDER GP-LIFT  
2. 7K-9218 [2] SEAL-LIP (114.3MM ID)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30450621
 

180-9366: CYLINDER & SEAL GP-TILT

1809366 - CYLINDER & SEAL GP-TILT
This is part of 1632018 - HYDRAULIC AR
l327194 SEBP3045
1809366 CYLINDER & SEAL GP-TILT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-9367 Y [1] CYLINDER GP-TILT  
2. 7K-9220 [4] SEAL-PIN  
3. 199-5816 C [1] GUARD  
4. 166-4217 [1] PAD  
5. 198-2390 [2] BOLT ( X)  
6. 8C-6362 [4] BOLT-PLT (5/8UNC X 2 3/4)  
7. 8T-4122 [4] WASHER-HARD-PLT (5/8)  
8. 255-3752 [1] SPACER  
9. 1T-0720 [2] BOLT (3/8UNC X 1 1/4)  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP30450622
 

269-0354: CYLINDER GP-LIFT

2690354 - CYLINDER GP-LIFT
This is part of 2692204 - CORROSION AR-PROTECTION (HIGH VELOCITY OXYGEN FUEL)
MACHINE No 8XZ0396 & UP,
PIN 8XZ00396 & UP,
AN ATTACHMENT
l327195 SEBP3045
2690354 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-1975 [1] CYLINDER AS  
  1V-7001 [1] BEARING-SLEEVE  
2. 4J-8734 [1] LOCKNUT (2 3/4-12 THD)  
3. 141-1985 [1] PISTON  
4. 9M-5894 [1] SEAL-O-RING  
5. 108-0122 [1] RING  
6. 141-1978 [1] HEAD  
7. 269-0353 [1] ROD  
8. 9T-0119 [1] SEAL AS  
9. 7J-8064 [1] RING-WEAR  
10. 5J-8400 [1] SEAL-U-CUP  
11. 8C-9129 [1] SEAL AS  
12. 4T-4753 [1] RING-WEAR  
13. 8C-5220 [1] SEAL-LIP  
14. 1D-4641 [2] BOLT (1UNC X 4 1/2)  
15. 1D-4638 [6] BOLT (1UNC X 3 1/2)  
16. 9M-2828 [8] WASHER-SPECIAL (1HARD)  
17. 2H-3755 [4] BOLT (5/16UNC X 5/8)  
18. 7S-6369 [4] WASHER (5/16)  
19. 8C-4893 [1] SEAL-HEAD  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  338-6597 AK [1] KIT-SEAL  
  A   NOT PART OF THIS GP
  K   KIT
 

#SEBP30450623
 

141-1974: CYLINDER GP-LIFT

1411974 - CYLINDER GP-LIFT
This is part of 1809365 - CYLINDER & SEAL GP-LIFT
215.9 MM BORE X 560.0 MM STROKE
l327196 SEBP3045
1411974 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    TYPE 1 COMPONENT LIST
   
1. 141-1975 R [1] CYLINDER AS  
  1V-7001 [1] BEARING-SLEEVE  
2. 4J-8734 [1] LOCKNUT (2 3/4-12 THD)  
3. 141-1985 [1] PISTON  
4. 9M-5894 J [1] SEAL-O-RING  
5. 108-0122 J [1] RING  
6. 141-1978 [1] HEAD  
7. 141-1977 R [1] ROD AS  
8. 9T-0119 J [1] SEAL AS  
9. 7J-8064 J [1] RING-WEAR  
10. 5J-8400 J [1] SEAL-U-CUP  
11. 8C-9129 J [1] SEAL AS  
12. 4T-4753 J [1] RING-WEAR  
13. 8C-5220 J [1] SEAL-LIP  
14. 1D-4641 [2] BOLT (1UNC X 4 1/2)  
15. 1D-4638 [6] BOLT (1UNC X 3 1/2)  
16. 9M-2828 [8] WASHER-SPECIAL (1HARD)  
17. 2H-3755 [4] BOLT (5/16UNC X 5/8)  
18. 7S-6369 [4] WASHER (5/16)  
19. 8C-4893 J [1] SEAL-HEAD  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  7X-2742 AJK [1] KIT-SEAL  
  8C-6386 AK [1] KIT-SEAL (OVERSIZE)  
   
    TYPE 2 COMPONENT LIST
   
 

#SEBP30450624
 

141-1974: CYLINDER GP-LIFT

1411974 - CYLINDER GP-LIFT
This is part of 1809365 - CYLINDER & SEAL GP-LIFT
215.9 MM BORE X 560.0 MM STROKE
l327197 SEBP3045
1411974 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-1975 R [1] CYLINDER AS  
  1V-7001 [1] BEARING-SLEEVE  
2. 4J-8734 [1] LOCKNUT (2 3/4-12 THD)  
3. 141-1985 [1] PISTON  
4. 9M-5894 J [1] SEAL-O-RING  
5. 158-3031 J [1] RING-BACKUP  
6. 141-1978 [1] HEAD  
7. 141-1977 R [1] ROD AS  
8. 9T-0119 J [1] SEAL AS  
9. 7J-8064 J [1] RING-WEAR  
10. 167-2331 J [1] SEAL-U-CUP  
11. 167-2216 J [1] SEAL AS  
12. 4T-4753 J [1] RING-WEAR  
13. 225-3287 CJ [1] SEAL-WIPER  
14. 1D-4641 [2] BOLT (1UNC X 4 1/2)  
15. 1D-4638 [6] BOLT (1UNC X 3 1/2)  
16. 9M-2828 [8] WASHER-SPECIAL (1HARD)  
17. 8C-4893 J [1] SEAL-HEAD  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  193-9260 AJ [1] KIT-SEAL  
  193-9262 AJ [1] KIT-SEAL (OVERSIZE)  
  R   REMFG PART MAY BE AVAIL
  J   KIT J INCLUDES PARTS MARKED J
  A   NOT PART OF THIS GP
  K   KIT
  C   INDICATES CHANGE
 

#SEBP30450625
 

180-9367: CYLINDER GP-TILT

1809367 - CYLINDER GP-TILT
This is part of 1809366 - CYLINDER & SEAL GP-TILT
254.0 MM BORE X 498.0 MM STROKE
l327199 SEBP3045
1809367 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 186-8721 [1] ROD-TILT CYLINDER  
2. 1V-5635 [1] BEARING-SLEEVE  
5. 186-8772 [1] HEAD-TILT CYLINDER  
6. 186-8722 [1] PISTON-TILT CYLINDER  
7. 186-8723 [1] CYLINDER AS  
8. 1V-5635 [1] BEARING-SLEEVE  
11. 186-8713 [1] CUSHION  
12. 186-8510 [1] RING-RETAINER  
13. 3G-5022 [1] NUT-LOCK (4 1/2UNC)  
16. 9J-3369 [1] RING-WEAR  
17. 166-5452 [1] SEAL  
18. 9X-7420 [1] RING-WEAR  
19. 167-2225 [1] SEAL AS-BUFFER  
20. 167-2344 [1] SEAL-U-CUP  
21. 225-3291 [1] SEAL-WIPER  
22. 5P-2235 [1] SEAL-O-RING  
23. 1U-3307 [1] RING-BACKUP  
24. 6V-4463 [6] BOLT-LOCKING (1/2 X 1 3/8)  
25. 5P-8245 [6] WASHER-HARD (1/2)  
26. 5S-7349 [4] BOLT-PLT (1/4UNC X 1/2)  
27. 8T-4205 [4] WASHER-HARD-PLT (1/4)  
31. 7X-0429 [6] BOLT (1 1/4UNC X 4 1/2)  
32. 7X-0430 [2] BOLT (1 1/4UNC X 5 1/2)  
33. 7X-0533 [8] WASHER-HARD-PLT  
34. 8C-4895 [1] SEAL-HEAD  
  166-3850 AK [1] KIT-SEAL  
  A   NOT PART OF THIS GP
  K   KIT
 

#SEBP30450626
 

269-1719: CYLINDER GP-TILT

2691719 - CYLINDER GP-TILT
This is part of 2692204 - CORROSION AR-PROTECTION (HIGH VELOCITY OXYGEN FUEL)
MACHINE No 8XZ0396 & UP,
PIN 8XZ00396 & UP,
AN ATTACHMENT
l327200 SEBP3045
2691719 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 269-1718 [1] ROD  
2. 1V-5635 C [1] BEARING-SLEEVE  
5. 186-8772 [1] HEAD-TILT CYLINDER  
6. 186-8722 [1] PISTON-TILT CYLINDER  
7. 186-8723 [1] CYLINDER AS  
8. 1V-5635 C [1] BEARING-SLEEVE  
9. 3B-8489 C [1] FITTING  
10. 7K-9220 C [2] SEAL-PIN  
11. 186-8713 [1] CUSHION  
12. 186-8510 [1] RING-RETAINER  
13. 3G-5022 [1] NUT-LOCK (4 1/2UNC)  
16. 9J-3369 [1] RING-WEAR  
17. 166-5452 [1] SEAL  
18. 9X-7420 [1] RING-WEAR  
19. 167-2225 [1] SEAL AS-BUFFER  
20. 167-2344 [1] SEAL-U-CUP  
21. 225-3291 [1] SEAL-WIPER  
22. 5P-2235 [1] SEAL-O-RING  
23. 1U-3307 [1] RING-BACKUP  
24. 6V-4463 [6] BOLT-LOCKING (1/2 X 1 3/8)  
25. 5P-8245 [6] WASHER-HARD (1/2)  
26. 5S-7349 [4] BOLT-PLT (1/4UNC X 1/2)  
27. 8T-4205 [4] WASHER-HARD-PLT (1/4)  
31. 7X-0429 [6] BOLT (1 1/4UNC X 4 1/2)  
32. 7X-0430 [2] BOLT (1 1/4UNC X 5 1/2)  
33. 7X-0533 [8] WASHER-HARD-PLT  
34. 8C-4895 [1] SEAL-HEAD  
  166-3850 AK [1] KIT-SEAL  
  C   INDICATES CHANGE
  A   NOT PART OF THIS GP
  K   KIT
 

#SEBP30450627
 

159-9892: DRAIN GP-HIGH SPEED FLUID

1599892 - DRAIN GP-HIGH SPEED FLUID (HYD TANK EVACUATION)
AN ATTACHMENT
l327201 SEBP3045
1599892 DRAIN GP-HIGH SPEED FLUID Parts scheme
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-8561 [1] BRACKET AS  
2. 203-0366 [1] RECEIVER  
3. 211-8333 [1] CAP  
4. 001-6301 [1] ELBOW-FLARED  
5. 226-8562 [1] HOSE AS  
  122-6900 [1] HOSE (00850 MM )  
  124-1969 [2] COUPLING  
6. 068-4174 [1] ELBOW  
7. 2M-9780 [1] SEAL-O-RING (19.18MM ID)  
8. 203-1756 [1] ADAPTER  
9. 8T-3298 [1] SEAL-RECTANGULAR (51.7MM ID)  
10. 9B-7237 [2] BOLT-PLT (3/8UNC X 1 1/4)  
11. 8T-4896 [4] WASHER-HARD (3/8)  
12. 276-8573 [1] LABEL-FAST FILL (HYDRAULIC)  
13. 5P-7854 [2] CLIP (31.8MM ID)  
14. 4L-6454 [2] BOLT (3/8UNC X 1)  
 

#SEBP30450628
 

163-2018: HYDRAULIC AR

1632018 - HYDRAULIC AR
This is part of 1632014 - COMMON AR
SEBP30450628 SEBP3045
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-9365 Y [2] CYLINDER & SEAL GP-LIFT  
2. 180-9366 Y [1] CYLINDER & SEAL GP-TILT  
3. 180-9653 Y [1] LINES GP-HYDRAULIC  
8. 183-3767 Y [1] LINES GP-HYDRAULIC OIL COOLER  
9. 180-9654 Y [1] LINES GP-HYDRAULIC OIL  
10. 183-2199 Y [1] LINES GP-LIFT CYLINDER  
11. 183-2200 Y [1] LINES GP-PILOT (FRONT)  
12. 205-9523 Y [1] LINES GP-PILOT (FRONT)  
14. 183-2464 Y [1] LINES GP-PILOT (REAR)  
15. 205-9504 Y [1] LINES GP-PILOT (REAR)  
16. 213-4917 Y [1] LINES GP-PILOT (REAR)  
17. 222-4887 Y [1] LINES GP-PILOT (REAR)  
19. 183-3762 Y [1] LINES GP-TILT CYLINDER  
20. 183-3760 Y [1] MOUNTING GP-HYDRAULIC TANK  
21. 184-2166 Y [1] PUMP & MTG GP-HYDRAULIC  
22. 183-3761 Y [1] PUMP & MTG GP-HYDRAULIC  
23. 9T-5247 YC [1] TANK & FILTER GP  
24. 235-3616 YC [1] TANK & FILTER GP  
25. 245-3091 Y [1] TANK & FILTER GP  
26. 174-4973 Y [1] VALVE & MTG GROUP-IMPLEMENT  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP30450629
 

280-9158: HYDRAULIC AR-3 VALVE

2809158 - HYDRAULIC AR-3 VALVE
This is part of 2811126 - BUCKET & VALVE AR-EJECTOR
MACHINE No 8XZ0421 & UP,
PIN 8XZ00421 & UP,
AN ATTACHMENT
SEBP30450629 SEBP3045
  For full view, you need register

Parts for your R1700G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
10. 280-9928 Y [1] LINES GP-IMPLEMENT  
20. 280-9156 Y [1] LINES GP-PILOT (3 VALVE)  
30. 240-0457 Y [1] RELAY GP-EJECTOR BUCKET  
40. 280-8575 Y [1] LINES GP-TILT CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104}
Check the Tilt Cylinder on Certain R1700G and R2900G Load Haul Dump Machines{5104}
Specifications
Lift Cylinder
R1700G LH.D. HYDRAULIC SYSTEMS
Tilt Cylinder
R1700G LH.D. HYDRAULIC SYSTEMS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED LIFT CYLINDER TUBE ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder - Remove
R1700G LH.D. MACHINE SYSTEMS
Tilt Cylinder - Disassemble
R1700G LH.D. MACHINE SYSTEMS
Tilt Cylinder - Assemble
R1700G LH.D. MACHINE SYSTEMS
Tilt Cylinder - Install
R1700G LH.D. MACHINE SYSTEMS
Lift Cylinder - Remove
R1700G LH.D. MACHINE SYSTEMS
Lift Cylinder - Disassemble
R1700G LH.D. MACHINE SYSTEMS
Lift Cylinder - Assemble
R1700G LH.D. MACHINE SYSTEMS
Lift Cylinder - Install
R1700G LH.D. MACHINE SYSTEMS
Service Magazine
Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
2000/09/04
An Improved Tilt Cylinder Guard is Now Available {5104}
2000/09/25
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Tooling is Available to Assist During Disassembly and Assembly of the Ejector Bucket {6128}
2008/02/18
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Correction to Specifications , "Tilt Cylinder" {5104}
2010/07/15
Correction to Disassembly and Assembly , "Tilt Cylinder - Assemble" {5104}
2010/07/15

Caterpillar Parts SIS Catalog R1700G :

CYLINDER & SEAL GP-EJECTOR
281-0433 CYLINDER & SEAL GP-EJECTOR
CYLINDER & SEAL GP-EJECTOR
280-9155 CYLINDER & SEAL GP-EJECTOR
269-2204 CORROSION AR-PROTECTION
247-0524 CONTROL AR-RIDE
217-0471 CONTROL AR-RIDE
183-3500 CONTROL AR-RIDE
BLOCK GP-HYDRAULIC
222-4625 BLOCK GP-HYDRAULIC
BLOCK GP-HYDRAULIC
205-9482 BLOCK GP-HYDRAULIC
CYLINDER & SEAL GP-TILT
180-9366 CYLINDER & SEAL GP-TILT
CYLINDER GP-LIFT
269-0354 CYLINDER GP-LIFT
CYLINDER GP-LIFT
141-1974 CYLINDER GP-LIFT
CYLINDER GP-LIFT
141-1974 CYLINDER GP-LIFT
CYLINDER GP-TILT
180-9367 CYLINDER GP-TILT
CYLINDER GP-TILT
269-1719 CYLINDER GP-TILT
DRAIN GP-HIGH SPEED FLUID
159-9892 DRAIN GP-HIGH SPEED FLUID
163-2018 HYDRAULIC AR

Truck sale:

CATERPILLAR R1700G 2012
 
CATERPILLAR R1700G 2012
- UNDERGROUND MINING LOADER
ZEPPELIN POWER SYSTEMS
>
 
 
CATERPILLAR R1700G 2018
- UNDERGROUND MINING LOADER
ZEPPELIN RUSSLAND
 
 
CATERPILLAR R1700G 2018
- UNDERGROUND MINING LOADER
ZEPPELIN RUSSLAND
 
 
CATERPILLAR R1700G 2004
- UNDERGROUND MINING LOADER
MADISA - MAQUINAS DIESEL S.A. DE C.V.
- SANTA CATARINA, N.L. - - 66350
CATERPILLAR R 1700 G 2013
 
CATERPILLAR R 1700 G 2013
- UNDERGROUND MINING LOADER
VOSTOCHNAYA TECHNICA LLC
Russian Federation
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.