ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP30480200
6V-5540: STARTING MOTOR GP-ELECTRIC
6V5540 - STARTING MOTOR GP-ELECTRIC
This is part of 6V5539 - STARTING MOTOR GP-ELECTRIC
This is part of 6V5539 - STARTING MOTOR GP-ELECTRIC
#SEBP30480201
7T-0794: STARTING MOTOR GP-ELECTRIC
7T0794 - STARTING MOTOR GP-ELECTRIC
Parts for your R2900 LOAD HAUL DUMP:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-7022 | [1] | HOUSING AS-DRIVE | |
| 2. | 8T-4205 | [4] | WASHER-HARD-PLT (1/4) | |
| 3. | 3T-0863 | [1] | LEVER-SHIFT | |
| 4. | 3T-0864 | [1] | HOUSING AS-LEVER | |
| [1] | PLATE | |||
| 5. | 9X-0332 | [1] | KIT-SOLENOID | |
| 6. | 8T-4244 M | [4] | NUT-HARD-PLT (M12 X 1.75) | |
| 7. | 3T-4716 | [1] | WIRE AS | |
| 8. | 3T-7020 M | [1] | WASHER | |
| 9. | 3T-0847 | [4] | SCREW | |
| 10. | 3T-0867 M | [1] | ARMATURE AS | |
| 11. | 3T-0865 | [1] | COIL AS-FIELD | |
| 12. | 3T-7021 | [1] | PLATE-BRAKE | |
| 13. | 3T-0850 M | [8] | SCREW | |
| 14. | 3T-0849 M | [12] | BOLT-SKT HD (M6 X 1.0 X 25) | |
| 15. | 5C-2874 M | [6] | NUT | |
| 16. | 3T-0858 | [4] | SPRING-BRUSH | |
| 17. | 6V-9673 M | [4] | SCREW - MACHINE | |
| 18. | 3T-0862 | [1] | PLATE AS-BRUSH | |
| 19. | 8F-1434 | [2] | LOCKWASHER (5MM ID) | |
| 20. | 8T-0328 | [6] | WASHER | |
| 21. | 4N-4405 | [1] | CLUTCH AS-DRIVE | |
| 22. | 8T-4970 M | [4] | BOLT (M6 X 1.0 X 14) | |
| 23. | 3T-7025 | [1] | COVER-END | |
| 24. | 7X-0562 | [4] | WASHER-HARD | |
| 3T-0844 K | [1] | KIT-BRUSH | ||
| 3T-2768 K | [1] | KIT-SEAL | ||
| 3T-2769 K | [1] | KIT-HARDWARE | ||
| 3T-7017 K | [1] | KIT-BEARING | ||
| 7T-2339 K | [1] | KIT-LEVER | ||
| M | METRIC PART | |||
| K | KIT | |||
#SEBP30480202
8C-3644: STARTING MOTOR GP-ELECTRIC
8C3644 - STARTING MOTOR GP-ELECTRIC
Parts for your R2900 LOAD HAUL DUMP:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5S-7349 | [4] | BOLT-PLT (1/4UNC X 1/2) | |
| 2. | 7L-2894 | [1] | GASKET | |
| 3. | 2H-3429 | [1] | RING-RETAINING | |
| 4. | 4B-2049 | [2] | NUT (NO.10.UNF) | |
| 5. | 8F-1434 | [2] | LOCKWASHER (5MM ID) | |
| 6. | 7T-3271 | [1] | CONNECTOR | |
| 7. | 8T-4205 | [4] | WASHER-HARD-PLT (1/4) | |
| 8. | 036-9823 | [5] | BOLT ( X) | |
| 9. | 7T-3277 | [1] | COIL AS-FIELD | |
| 10. | 3F-0379 | [8] | SCREW-POLE SHOE | |
| 11. | 7T-3276 | [1] | ARMATURE AS | |
| 12. | 8H-1141 | [4] | SHOE-POLE | |
| 13. | 7T-3454 | [1] | INSULATOR | |
| 14. | 7T-3279 | [1] | HOUSING AS | |
| 15. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
| 16. | 3T-3422 | [1] | WIRE AS | |
| 2L-8066 | [1] | TERMINAL (10 GA) | ||
| 2L-8071 | [1] | TERMINAL (10 GA) | ||
| 17. | 8T-8566 | [1] | TERMINAL AS | |
| 18. | 3T-3434 | [6] | PLUG (12.7MM OD SPH | |
| 19. | 6V-8188 | [4] | NUT-HARD-PLT (1/2UNC) | |
| 20. | 7X-0562 | [4] | WASHER-HARD | |
| 21. | 8T-0328 | [2] | WASHER | |
| 22. | 7T-3451 | [1] | INSULATOR-TERMINAL | |
| 23. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
| 24. | 9X-9511 | [1] | SOLENOID AS | |
| 25. | 036-9821 | [1] | WASHER | |
| 26. | 7T-3269 | [1] | BOOT | |
| 27. | 7T-3270 | [1] | PLUNGER AS | |
| 28. | 9M-7609 | [1] | SPRING | |
| 29. | 4M-1828 | [1] | RETAINER-SPRING | |
| 30. | 4M-1827 | [1] | RETAINER-SPRING | |
| 31. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
| 32. | 7T-3973 | [1] | HOUSING AS-LEVER | |
| 33. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 34. | 7X-3373 | [6] | BOLT (5/16UNC X) | |
| 35. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 7T-3267 K | [1] | KIT-BUSHING | ||
| 7T-3268 K | [1] | KIT-LEVER | ||
| 8C-3655 K | [1] | KIT-BRUSH | ||
| 8T-9884 K | [1] | KIT-INSULATOR | ||
| K | KIT | |||
#SEBP30480203
9X-4452: STARTING MOTOR GP-ELECTRIC
9X4452 - STARTING MOTOR GP-ELECTRIC
Parts for your R2900 LOAD HAUL DUMP:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8188 | [3] | NUT-HARD-PLT (1/2UNC) | |
| 2. | 7X-0562 | [3] | WASHER-HARD | |
| 3. | 4B-2049 C | [1] | NUT (NO.10.UNF) | |
| 4. | 8F-1434 | [1] | LOCKWASHER (5MM ID) | |
| 5. | 8T-0328 C | [1] | WASHER | |
| 6. | 8T-4133 M | [1] | NUT-HARD-PLT (M10 X 1.5) | |
| 7. | 8T-4121 M | [1] | WASHER-HARD-PLT (M10) | |
| 8. | 3E-0142 | [1] | HOUSING AS | |
| 9. | 3E-0141 | [1] | STOP-STARTING MOTOR | |
| 10. | 4N-7521 | [1] | LOCKRING | |
| 11. | 3E-0146 | [1] | DRIVE AS-STARTING MOTOR | |
| 12. | 3E-0144 | [1] | HOUSING AS | |
| 13. | 3E-0140 | [1] | LEVER AS-STARTER | |
| 14. | 3E-0139 | [1] | HOUSING AS | |
| 15. | 3E-0138 | [1] | ARMATURE AS | |
| 16. | 3E-0137 | [1] | HOLDER AS | |
| 17. | 3E-0136 | [1] | HOUSING AS | |
| 18. | 3E-0133 | [1] | WIRE AS-STARTING MOTOR | |
| 19. | 3E-0135 | [1] | SOLENOID AS | |
| 20. | 3E-0132 | [1] | CONNECTOR | |
| 21. | 3E-0134 | [1] | COVER-PLUNGER | |
| 3E-0127 K | [1] | KIT-BEARING | ||
| 3E-0128 K | [1] | KIT-BRUSH | ||
| 3E-0129 K | [1] | KIT-HARDWARE | ||
| 3E-0130 K | [1] | KIT-STARTING MOTOR SEAL | ||
| 3E-0131 K | [1] | KIT-WASHER | ||
| 3E-0145 K | [1] | KIT-STARTING MOTOR PIN | ||
| C | INDICATES CHANGE | |||
| M | METRIC PART | |||
| K | KIT | |||
#SEBP30480204
7N-0718: SWITCH AS-DISCONNECT
7N0718 - SWITCH AS-DISCONNECT (2 POST)
This is part of 1737269 - BATTERY & WIRING GP
This is part of 1737269 - BATTERY & WIRING GP
#SEBP30480205
166-4221: SWITCH AS-DISCONNECT
1664221 - SWITCH AS-DISCONNECT (4 POST)
MACHINE No 5TW0301-00356,
PIN 5TW00301-00356,
AN ATTACHMENT
MACHINE No 5TW0301-00356,
PIN 5TW00301-00356,
AN ATTACHMENT
Parts for your R2900 LOAD HAUL DUMP:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICEABLE PARTS | ||||
#SEBP30480206
9W-1077: SWITCH AS-START
9W1077 - SWITCH AS-START
This is part of 1770118 - PANEL GP-INSTRUMENT (STIC STEER)
This is part of 1770118 - PANEL GP-INSTRUMENT (STIC STEER)
#SEBP30480207
313-9857: SWITCH GP-BRAKE
3139857 - SWITCH GP-BRAKE (PULL TO ENGAGE PARKING)
AN ATTACHMENT
AN ATTACHMENT
#SEBP30480208
228-5367: SWITCH GP-BRAKE
2285367 - SWITCH GP-BRAKE (PUSH TO ENGAGE PARKING)
AN ATTACHMENT
AN ATTACHMENT
#SEBP30480209
173-8970: SWITCH GP-LIFT ARM POSITIONER
1738970 - SWITCH GP-LIFT ARM POSITIONER
This is part of 1641632 - CHASSIS AR
This is part of 1641632 - CHASSIS AR
Parts for your R2900 LOAD HAUL DUMP:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-2502 | [2] | BOLT-PLT (3/8UNC X 1 1/8) | |
| 2. | 5P-1075 C | [2] | WASHER (3/8PANEL) | |
| 3. | 3E-0461 | [1] | CONTROL GP-ELECTRONIC | |
| 7N-7779 | [2] | SOCKET | ||
| 7N-7780 | [1] | PIN-CONNECTOR (BLADE) | ||
| 7N-7782 | [1] | HOUSING-PLUG | ||
| 9X-5617 | [1] | FILM | ||
| 4. | 5G-7820 | [1] | MAGNET AS | |
| 5. | 8T-9043 | [2] | BOLT-PLT (5/16UNC X 7/8) | |
| 6. | 8T-4224 | [2] | WASHER-HARD-PLT (M8) | |
| 7. | 1T-0416 | [2] | BOLT-12 PT HD (5/16UNC X 3/4) | |
| 8. | 203-1859 | [1] | ADJUSTER-LIFT ARM POSITIONER | |
| C | INDICATES CHANGE | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Disassembly and Assembly
Service Magazine

