AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1586586 - CYLINDER GP-LIFT This is part of 1620330 - CYLINDER & SEAL GP-LIFT (RH) (RH) 1901620330.5) BORE X 749.5MM (29.5) STROKE R1600


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-DRAIN
HYDRAULIC GP
TANK GP
LINES GP-HYDRAULIC

LOAD HAUL DUMP R1600 LOAD HAUL DUMP 9XP
 R1600 LOAD HAUL DUMP 9XP00001-UP (MACHINE) SEBP3060 R1600 9XP   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
GUARD GP-TILT CYLINDER
222-5081 GUARD GP-TILT CYLINDER
CYLINDER & SEAL GP-EJECTOR
159-9490 CYLINDER & SEAL GP-EJECTOR
CYLINDER & SEAL GP-LIFT
162-0329 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-LIFT
162-0330 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-TILT
203-4405 CYLINDER & SEAL GP-TILT
CYLINDER GP-LIFT
158-6586 CYLINDER GP-LIFT
CYLINDER GP-LIFT
158-6586 CYLINDER GP-LIFT
CYLINDER GP-LIFT
158-6587 CYLINDER GP-LIFT
CYLINDER GP-LIFT
158-6587 CYLINDER GP-LIFT
 

#SEBP30600440
 

158-6586: CYLINDER GP-LIFT

1586586 - CYLINDER GP-LIFT
This is part of 1620330 - CYLINDER & SEAL GP-LIFT (RH)
(RH) 1901620330.5) BORE X 749.5MM (29.5) STROKE
l365077 SEBP3060
1586586 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-6588 R [1] CYLINDER AS  
2. 1V-8241 [1] BEARING-SLEEVE (108.300MM ID)  
3. 2J-7686 [1] NUT  
4. 9J-5562 J [1] RING-WEAR  
5. 8T-1791 J [1] SEAL AS  
6. 9J-5561 [1] PISTON  
7. 4T-3107 J [1] RING-BACKUP  
8. 4H-6520 J [1] SEAL-O-RING (183.74MM ID)  
9. 9T-3508 [1] HEAD  
10. 1D-4629 [2] BOLT (7/8UNC X 3 1/2)  
11. 5P-8249 [8] WASHER-HARD (7/8)  
12. 225-3286 J [1] SEAL-WIPER  
13. 158-6590 R [1] ROD AS  
14. 167-2211 J [1] SEAL AS-BUFFER  
15. 167-2324 J [1] SEAL-U-CUP  
16. 1D-4628 [6] BOLT (7/8UNC X 3 1/4)  
17. 8T-3329 J [1] RING-WEAR  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  193-3096 JK [1] KIT-SEAL  
  R   REMFG PART MAY BE AVAIL
  J   KIT J INCLUDES PARTS MARKED J
  K   KIT
 

#SEBP30600441
 

158-6587: CYLINDER GP-LIFT

1586587 - CYLINDER GP-LIFT
This is part of 1620329 - CYLINDER & SEAL GP-LIFT (LH)
(LH) 1901620329.5) BORE X 749.5MM (29.5) STROKE
l365078 SEBP3060
1586587 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    TYPE 1 COMPONENT LIST
   
1. 158-6588 R [1] CYLINDER AS  
2. 1V-8241 [1] BEARING-SLEEVE (108.300MM ID)  
3. 2J-7686 [1] NUT  
4. 9J-5562 J [1] RING-WEAR  
5. 8T-1791 J [1] SEAL AS  
6. 9J-5561 [1] PISTON  
7. 4T-3107 J [1] RING-BACKUP  
8. 4H-6520 J [1] SEAL-O-RING (183.74MM ID)  
9. 9T-3508 [1] HEAD  
10. 1D-4629 [2] BOLT (7/8UNC X 3 1/2)  
11. 5P-8249 [8] WASHER-HARD (7/8)  
12. 8C-5219 J [1] SEAL-LIP  
13. 158-6590 R [1] ROD AS  
14. 8C-9127 J [1] SEAL AS  
15. 5J-8350 J [1] SEAL (88.9MM ID)  
16. 1D-4628 [6] BOLT (7/8UNC X 3 1/4)  
17. 8T-3329 J [1] RING-WEAR  
18. 9T-2584 [1] RING-RETAINING  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  7X-2730 JK [1] KIT-SEAL  
   
    TYPE 2 COMPONENT LIST
   
 

#SEBP30600442
 

158-6587: CYLINDER GP-LIFT

1586587 - CYLINDER GP-LIFT
This is part of 1620329 - CYLINDER & SEAL GP-LIFT (LH)
(LH) 1901620329.5) BORE X 749.5MM (29.5) STROKE
l365079 SEBP3060
1586587 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-6588 R [1] CYLINDER AS  
2. 1V-8241 [1] BEARING-SLEEVE (108.300MM ID)  
3. 2J-7686 [1] NUT  
4. 9J-5562 J [1] RING-WEAR  
5. 8T-1791 J [1] SEAL AS  
6. 9J-5561 [1] PISTON  
7. 4T-3107 J [1] RING-BACKUP  
8. 4H-6520 J [1] SEAL-O-RING (183.74MM ID)  
9. 9T-3508 [1] HEAD  
10. 1D-4629 [2] BOLT (7/8UNC X 3 1/2)  
11. 5P-8249 [8] WASHER-HARD (7/8)  
12. 225-3286 J [1] SEAL-WIPER  
13. 158-6590 R [1] ROD AS  
14. 167-2211 J [1] SEAL AS-BUFFER  
15. 167-2324 J [1] SEAL-U-CUP  
16. 1D-4628 [6] BOLT (7/8UNC X 3 1/4)  
17. 8T-3329 J [1] RING-WEAR  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  193-3096 JK [1] KIT-SEAL  
  R   REMFG PART MAY BE AVAIL
  J   KIT J INCLUDES PARTS MARKED J
  K   KIT
 

#SEBP30600443
 

159-9892: DRAIN GP-HIGH SPEED FLUID

1599892 - DRAIN GP-HIGH SPEED FLUID (HYD TANK EVACUATION)
AN ATTACHMENT
l365081 SEBP3060
1599892 DRAIN GP-HIGH SPEED FLUID Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-8561 [1] BRACKET AS  
2. 203-0366 [1] RECEIVER  
3. 211-8333 [1] CAP  
4. 001-6301 [1] ELBOW-FLARED  
5. 226-8562 [1] HOSE AS  
  122-6900 [1] HOSE (00850 MM )  
  124-1969 [2] COUPLING  
6. 068-4174 [1] ELBOW  
7. 2M-9780 [1] SEAL-O-RING (19.18MM ID)  
8. 203-1756 [1] ADAPTER  
9. 8T-3298 [1] SEAL-RECTANGULAR (51.7MM ID)  
10. 9B-7237 [2] BOLT-PLT (3/8UNC X 1 1/4)  
11. 8T-4896 [4] WASHER-HARD (3/8)  
12. 276-8573 [1] LABEL-FAST FILL (HYDRAULIC)  
13. 5P-7854 [2] CLIP (31.8MM ID)  
14. 4L-6454 [2] BOLT (3/8UNC X 1)  
 

#SEBP30600444
 

217-8577: HYDRAULIC AR

2178577 - HYDRAULIC AR
This is part of 2178571 - COMMON AR
SEBP30600444 SEBP3060
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0329 Y [1] CYLINDER & SEAL GP-LIFT (LH)  
2. 162-0330 Y [1] CYLINDER & SEAL GP-LIFT (RH)  
3. 203-4405 Y [1] CYLINDER & SEAL GP-TILT  
4. Y [1] LINES GP-HYDRAULIC  
5. 217-1621 Y [1] LINES GP-HYDRAULIC  
6. 160-0298 Y [1] LINES GP-HYDRAULIC OIL  
7. 161-2925 Y [1] LINES GP-HYDRAULIC OIL COOLER  
8. 162-0331 Y [1] LINES GP-LIFT CYLINDER  
9. 217-1623 Y [1] LINES GP-LIFT CYLINDER  
10. Y [1] LINES GP-PILOT (FRONT)  
11. 213-2522 Y [1] LINES GP-PILOT (REAR)  
12. 159-9460 Y [1] LINES GP-TILT CYLINDER  
13. 159-9487 Y [1] MOUNTING GP-HYDRAULIC TANK  
14. 107-2085 Y [1] PUMP & MTG GP-HYDRAULIC  
15. 9T-5247 Y [1] TANK & FILTER GP  
16. 235-3616 YC [1] TANK & FILTER GP  
17. 217-1622 Y [1] VALVE & LINES GP-HYD RELIEF  
18. 160-0606 Y [1] VALVE & MOUNTING GP  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP30600445
 

169-8847: HYDRAULIC AR-2 VALVE

1698847 - HYDRAULIC AR-2 VALVE
AN ATTACHMENT
SEBP30600445 SEBP3060
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-4382 Y [1] BLOCK GP-HYDRAULIC (2 VALVE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30600446
 

170-0296: HYDRAULIC AR-3 VALVE

1700296 - HYDRAULIC AR-3 VALVE
AN ATTACHMENT
SEBP30600446 SEBP3060
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-0842 Y [1] LINES GP-IMPLEMENT (3 VALVE)  
2. 160-0841 Y [1] LINES GP-PILOT (3 VALVE)  
3. 4T-2747 Y [1] VALVE GP-CONTROL  
4. Y [1] RELAY GP-EJECTOR BUCKET  
   
    DRAWING REFERENCE
    ============================
    INSTALLATION DRAWING
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP30600447
 

228-1892: INDICATOR GP-LIQUID LEVEL

2281892 - INDICATOR GP-LIQUID LEVEL
AN ATTACHMENT
l365085 SEBP3060
2281892 INDICATOR GP-LIQUID LEVEL Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-6277 [1] GAUGE-LIQUID LEVEL  
2. 121-7958 [2] BOLT (1/2UNF X 1 3/4)  
3. 8F-3469 [2] SEAL (15.54MM ID)  
4. 9B-7237 [2] BOLT-PLT (3/8UNC X 1 1/4)  
5. 6V-8801 [2] NUT-HARD-PLT (3/8UNC)  
6. 8T-4896 [2] WASHER-HARD (3/8)  
7. 228-1915 [1] BRACKET AS  
8. 8F-3469 [2] SEAL (15.54MM ID)  
   
    DRAWING REFERENCE
    ============================
    INSTALLATION DRAWING
   
 

#SEBP30600448
 

160-0611: LINES GP-EJECTOR BUCKET

1600611 - LINES GP-EJECTOR BUCKET
This is part of 1659997 - BUCKET AR-EJECTOR
AN ATTACHMENT
l365086 SEBP3060
1600611 LINES GP-EJECTOR BUCKET Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-8572 [2] HOSE AS ( ORIENT. 0 DEG.)  
    (Each Includes)
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (01350 MM )  
  6V-0745 [1] BRAIDED STAINLESS STEEL COVER (01350 MM )  
  6V-3364 [1] COUPLING  
  6V-4662 [1] COUPLING  
2. 1P-4577 [8] FLANGE-HALF  
3. 1P-4576 [12] FLANGE  
4. 5S-7382 [40] BOLT-PLT (3/8UNC X 1 3/8)  
5. 8T-4896 [40] WASHER-HARD (3/8)  
6. 4J-0520 [4] SEAL-O-RING (32.92MM ID)  
7. 226-8573 [2] HOSE AS  
    (Each Includes)
  3S-8606 [2] SLEEVE  
  5P-0179 [1] HOSE (00675 MM )  
  5S-9593 [1] COUPLING  
  8T-3711 C [1] COUPLING  
8. 4J-5267 [6] SEAL-O-RING (24.99MM ID)  
9. 226-8574 [1] HOSE AS ( ORIENT. 336 DEG.)  
  3S-8606 [2] SLEEVE  
  3S-8975 [1] COUPLING  
  5P-0179 [1] HOSE (00605 MM )  
  5S-9593 [1] COUPLING  
10. 1P-4574 [4] FLANGE-HALF  
11. 4J-5140 [2] SEAL-O-RING (18.64MM ID)  
12. 186-9445 [1] MANIFOLD  
13. 8M-2530 [4] BOLT (1/2UNC X 1 1/4)  
14. 7M-8485 [2] SEAL-O-RING (29.74MM ID)  
15. 6V-8918 [8] BOLT (5/16UNC X 1 1/4)  
16. 8T-4224 [8] WASHER-HARD-PLT (M8)  
17. 226-8575 [1] HOSE AS ( ORIENT. 17 DEG.)  
  3S-8606 [2] SLEEVE  
  3S-8975 [1] COUPLING  
  5P-0179 [1] HOSE (00605 MM )  
  5S-9593 [1] COUPLING  
18. 9S-4191 [2] PLUG-STOR  
19. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
20. 9S-4181 [2] PLUG-O-RING (1 5/16)  
21. 149-7372 [2] SLEEVE-ABRASION  
22. 163-5531 B [4] STRAP-CABLE (LARGE)  
  C   INDICATES CHANGE
  B   USE AS REQUIRED
 

#SEBP30600449
 

159-9893: LINES GP-HYDRAULIC

1599893 - LINES GP-HYDRAULIC
This is part of 2178577 - HYDRAULIC AR
MACHINE No 9XP1101-01112,
PIN 9XP01101-01112,
l365087 SEBP3060
1599893 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your R1600 LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TUBE AS  
2. 7X-0310 [4] BOLT-PLT (7/16UNC X 2)  
3. 8T-5360 [8] WASHER-HARD-PLT (7/16)  
4. 8C-5723 [1] CONNECTOR  
5. 3J-1907 [6] SEAL-O-RING (11.89MM ID)  
6. 186-9437 [1] SPACER  
7. 216-0393 B [1] SHIM-3MM  
8. 9S-4191 [4] PLUG-STOR  
9. 186-9417 [1] TUBE AS  
10. 186-9418 [1] TUBE AS  
11. 3R-6789 [1] CAP-FLARED  
12. 030-7951 [1] ELBOW-FLARED  
13. 8T-5005 M [1] BOLT-PLT (M10 X 1.5 X 70)  
14. 8T-4121 M [4] WASHER-HARD-PLT (M10)  
15. 4E-3083 [1] TUBE AS  
16. 6V-8628 [1] ELBOW-90 DEGREE (9/16-18 THD)  
17. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
18. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
19. 7M-8485 [5] SEAL-O-RING (29.74MM ID)  
20. 7X-0312 [4] BOLT (7/16UNC X 2 1/2)  
21. 216-0394 B [1] SHIM-5MM  
22. 8T-4198 M [1] BOLT-PLT (M10 X 1.5 X 100)  
23. 6V-8627 [1] ELBOW-90 DEGREE (9/16-18 THD)  
24. [1] BLOCK  
25. 6V-3965 [1] NIPPLE AS  
26. 6V-0852 [1] CAP-DUST  
27. 8T-4223 [14] WASHER-HARD (1/2)  
28. 7X-0328 [4] BOLT-PLT (1/2UNC X 3 1/2)  
29. 1P-4579 [4] FLANGE-HALF  
30. 186-9435 [1] SPACER  
31. 8T-4122 [4] WASHER-HARD-PLT (5/8)  
32. 5P-8077 [2] FLANGE-HALF  
33. 6V-8635 [1] CONNECTOR-SEAL  
34. 8T-7927 [2] ADAPTER  
35. 168-6890 [2] CLIP (SLOT)  
36. 168-6891 [2] CLIP (TAB)  
37. 6V-1574 [2] GROMMET  
38. 8T-8917 [2] BOLT-PLT (1/2UNC X 1 1/4)  
39. 216-0392 B [1] SHIM-2MM  
40. 226-1379 [1] HOSE AS ( ORIENT. 312 DEG.)  
  3S-8330 [2] SLEEVE  
  3S-9327 [1] COUPLING  
  3S-9332 [1] COUPLING  
  5P-0183 C [1] HOSE (00955 MM )  
41. 4J-0524 [3] SEAL-O-RING (47.22MM ID)  
42. 8T-8919 [8] BOLT (1/2UNC X 1 3/4)  
43. 226-1378 [1] HOSE AS  
  5P-0203 [1] HOSE (02500 MM )  
  5P-3093 [1] COUPLING  
  5P-3106 [2] SLEEVE  
  5P-6451 [1] COUPLING  
44. 186-9451 [1] ELBOW  
45. 8T-6871 [4] BOLT-PLT (5/8UNC X 2 1/2)  
46. 7X-0326 [2] BOLT-PLT (1/2UNC X 3)  
47. 1P-3705 [1] SEAL-RECTANGULAR (44.7MM ID)  
48. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
49. 6V-8400 [2] SEAL-0-RING (29.9MM ID)  
50. 110-4372 Y [1] VALVE GP-DIVERTER  
51. 5K-9090 [2] SEAL-O-RING (23.52MM ID)  
52. 9T-0818 [1] VALVE-BREAKER  
53. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
54. 1P-3706 [1] SEAL (57.9MM ID)  
  B   USE AS REQUIRED
  M   METRIC PART
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Conversion of Hydraulic System from Petroleum Oil to a Fire Resistant Water/Glycol Fluid{5050}
Conversion of Hydraulic System from Petroleum Oil to a Fire Resistant Water/Glycol Fluid{5050}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
R1600 Load Haul Dump Hydraulic System
Tilt Cylinder
R1600 Load Haul Dump Hydraulic System
Ejector Cylinder
R1600 Load Haul Dump Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Lift and Tilt Cylinder Drift - Check
R1600 Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Speed - Check
R1600 Load Haul Dump Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinders (Ejector)
R1600 L.H.D. MACHINE YSTEMS
Tilt Cylinder
R1600 L.H.D. MACHINE YSTEMS
Lift Cylinders
R1600 L.H.D. MACHINE YSTEMS
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Tooling is Available to Assist During Disassembly and Assembly of the Ejector Bucket {6128}
2008/02/18
A New Washer is Now Used in the Ejector Cylinder {5305}
2007/11/19
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog R1600 :

CYLINDER GP-LIFT
158-6586 CYLINDER GP-LIFT
CYLINDER & SEAL GP-TILT
203-4405 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-LIFT
162-0330 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-LIFT
162-0329 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-EJECTOR
159-9490 CYLINDER & SEAL GP-EJECTOR
217-1617 CONTROL AR-RIDE
217-0991 CONTROL AR-RIDE
CARTRIDGE GP
100-2870 CARTRIDGE GP
CYLINDER GP-LIFT
158-6587 CYLINDER GP-LIFT
CYLINDER GP-LIFT
158-6587 CYLINDER GP-LIFT
DRAIN GP-HIGH SPEED FLUID
159-9892 DRAIN GP-HIGH SPEED FLUID
217-8577 HYDRAULIC AR
169-8847 HYDRAULIC AR-2 VALVE
170-0296 HYDRAULIC AR-3 VALVE
INDICATOR GP-LIQUID LEVEL
228-1892 INDICATOR GP-LIQUID LEVEL
LINES GP-EJECTOR BUCKET
160-0611 LINES GP-EJECTOR BUCKET

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.