6L-4502 CHART-PLATE & FILM 3512 MARINE AUXILIARY

Part No	Qty	Parts name
8L-9765	[1]	FILM-FUEL RETURN (EXCESS)
		INSTALL FILM ON FUEL RETURN VALVE OR THE FUEL FILTER HOUSING.
5P-1175	[1]	FILM-IDENTIFICATION (ENGINE OIL FILL)
		INSTALL FILM ON THE TOP OF THE OIL FILL CAP CENTERED BETWEEN THE HANDLE & THE TOP EDGE OF THE OIL FILL CAP.
250-3444	[1]	FILM-INFORMATION (STANDARD ROTATION)
		INSTALL FILM ON THE LH CAM GEAR COVER IN A VISIBLE LOCATION
		IF THAT COVER IS NOT AVAILABLE MOVE TO THE RH CAM GEAR COVER.
4W-5137	[2]	FILM-WARNING (DUPLEX OIL, FUEL FILTER)
		INSTALL FILM ON THE RH & LH SIDE OF THE DUPLEX FUEL OR OIL FILTER HOUSING.
233-6084	[2]	FILM-WARNING (FIRE, STOP ENGINE, DO NOT OPEN)
		INSTALL ONE FILM ON THE RH & LH SIDES OF THE ENGINE NEAR THE TOP OF THE CRANKCASE COVERS
		NEAREST THE CENTERLINE OF THE ENGINE VISIBLE FORM THE SIDE OF THE ENGINE,
		DO NOT INSTALL ON THE EXPLOSION RELIEF VALVES.
308-4479	[2]	FILM-WARNING (NO WELD, READ OMM)
		INSTALL ONE FILM ON EACH SIDE OF THE ENGINE, ONE FILM ON TOP OF THE POWER DISTRIBUTION BOX,
		AND ONE FILM ON THE OPPOSITE SIDE OF THE ENGINE, CENTERED ON THE FIRST VISIBLE SIDE COVER FROM THE REAR OF THE ENGINE
		IF THERE IS NO POWER DISTRIBUTION BOX, INSTALL BOTH FILMS ON THE FIRST VISIBLE SIDE COVER FROM THE REAR.
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		CONTACT YOUR LOCAL DEALER.
		INSTALL FILM ON THE LH, FRONT, LOWER HEAD FACE OF THE BLOCK BETWEEN CYL #2 & THE FRONT HOUSING,
		READABLE FROM LEFT SIDE OF ENGINE.
		INSTALL CLEAR LAMINATE OVER FILM.
298-5631	[2]	PLATE-IDENTIFICATION (CAT)
		INSTALL ONE ON RH REAR CAM COVER & ONE ON THE LH FRONT CAM COVER IF VISIBLE.
		IF EITHER PRIMARY LOCATION IS NOT VISIBLE,
		INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION ON THAT SIDE OF THE ENGINE.
2W-6326	[1]	PLATE-INSTRUCTION (FUEL)
		INSTALL PLATE ON THE DUPLEX FUEL FILTER GROUP ON THE LH SIDE TOWARDS THE FRONT OF ENGINE.
4W-0333	[1]	PLATE-INSTRUCTION (DUPLEX OIL FILTERS)
		INSTALL ON DUPLEX FUEL FILTER GROUP ON LH SIDE TOWARDS FRONT OF ENGINE.
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		CONTACT YOUR LOCAL DEALER.
		REFLATTEN AFTER STAMPING.
		INSTALL ON LH SIDE OF BLOCK NEAR REAR FACE ON CAMSHAFT COMPARTMENT USING 7B-3028 DRIVE SCREWS.
		STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH.
2N-3479	[8]	SCREW (10-24X0.5-IN)
7B-3028	[2]	SCREW-DRIVE (NO 4X 3/16-IN)

#SEBP30670221

228-3581: FILM-WARNING

FILM-WARNING

228-3581 FILM-WARNING -UNIVERSAL
AN ATTACHMENT

i02710337 SEBP3067

For full view, you need register

Parts for your 3512 MARINE AUXILIARY:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP30670222

268-8154: KIT-GASKET

KIT-GASKET

268-8154 KIT-GASKET -SINGLE FUEL INJECTOR
FIELD INSTALLATION

i05399035 SEBP3067

For full view, you need register

Parts for your 3512 MARINE AUXILIARY:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	245-4907	[1]	SEAL-O-RING
2.	245-4908	[1]	SEAL-O-RING

			FOR A LIST OF RELATED PARTS THAT ARE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTPS://DEALER.CAT.COM/RELATED