AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-7987 PUMP GP-FUEL INJECTION 3013 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

INDUSTRIAL ENGINE 3013 INDUSTRIAL ENGINE 4XD
 3013 Industrial Engine 4XD00001-UP SEBP3070 3013 4XD   (1999)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-7987 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
202-0109 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
229-2292 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
252-6987 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
293-3246 PUMP GP-FUEL INJECTION
 

#SEBP30700120
 

155-7987: PUMP GP-FUEL INJECTION

155-7987 PUMP GP-FUEL INJECTION
i00896369 SEBP3070
1557987 PUMP GP-FUEL INJECTION Parts scheme 1557987 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5592 M [2] NUT (M8X1.25-THD)  
2. 153-5960 M [2] NUT (M6X1-THD)  
3. 351-8829 [1] SOLENOID (FUEL SHUTOFF)  
4. 153-6412 [1] WASHER  
5. 165-2141 M [2] BOLT (M8X1.25X20-MM)  
6. 426-4357 [3] GASKET  
7. 252-1446 [3] INJECTOR AS-FUEL  
    (EACH INCLUDES)
7A. 205-4731 [1] NUT  
7B. 202-1196 [1] WASHER-SPECIAL  
8. 252-6987 Y [1] PUMP GP-FUEL INJECTION  
9. 155-7991 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
10. 155-7993 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
11. 155-7995 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
12. 236-4887 [1] LINE-LEAKOFF  
13. 236-4961 B [1] SHIM (0.2-MM THK)  
  236-4959 B [1] SHIM (0.3-MM THK)  
  236-4954 B [1] SHIM (0.4-MM THK)  
  236-4952 B [1] SHIM (0.5-MM THK)  
  160-7034 B [1] SHIM (0.9-MM THK)  
14. 154-2714 [1] BOLT  
15. 154-2715 [2] WASHER  
16. 290-8014 [4] CLAMP  
17. 183-3353 [2] BOLT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30700121
 

202-0109: PUMP GP-FUEL INJECTION

202-0109 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01528578 SEBP3070
2020109 PUMP GP-FUEL INJECTION Parts scheme 2020109 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5592 M [2] NUT (M8X1.25-THD)  
2. 153-5960 M [2] NUT (M6X1-THD)  
3. 351-8829 [1] SOLENOID (FUEL SHUTOFF)  
4. 153-6412 [1] WASHER  
5. 165-2141 M [2] BOLT (M8X1.25X20-MM)  
6. 154-2716 [3] SEAL  
7. 252-1446 [3] INJECTOR AS-FUEL  
    (EACH INCLUDES)
7A. 205-4731 [1] NUT  
7B. 202-1196 [1] WASHER-SPECIAL  
8. 252-6987 Y [1] PUMP GP-FUEL INJECTION  
9. 155-7991 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
10. 155-7993 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
11. 155-7995 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
12. 236-4887 [1] LINE-LEAKOFF  
13. 236-4961 B [1] SHIM (0.2-MM THK)  
  236-4959 B [1] SHIM (0.3-MM THK)  
  236-4954 B [1] SHIM (0.4-MM THK)  
  236-4952 B [1] SHIM (0.5-MM THK)  
  160-7034 B [1] SHIM (0.9-MM THK)  
14. 154-2714 [1] BOLT  
15. 154-2715 [2] WASHER  
16. 290-8014 [4] CLAMP  
17. 183-3353 [2] BOLT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30700122
 

229-2292: PUMP GP-FUEL INJECTION

229-2292 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01909836 SEBP3070
2292292 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5592 M [2] NUT (M8X1.25-THD)  
2. 153-5960 M [2] NUT (M6X1-THD)  
3. 290-8014 [4] CLAMP  
4. 351-8829 [1] SOLENOID (FUEL SHUTOFF)  
5. 153-6412 [1] WASHER  
6. 154-2714 [1] BOLT  
7. 154-2715 [1] WASHER  
8. 154-2716 [3] SEAL  
9. 252-1446 [3] INJECTOR AS-FUEL  
    (EACH INCLUDES)
9A. 202-1196 [1] WASHER-SPECIAL  
9B. 205-4731 [1] NUT  
10. 236-4887 [1] LINE-LEAKOFF  
11. 236-4961 B [1] SHIM (0.2-MM THK)  
  236-4959 B [1] SHIM (0.3-MM THK)  
  236-4954 B [1] SHIM (0.4-MM THK)  
  236-4952 B [1] SHIM (0.5-MM THK)  
  160-7034 B [1] SHIM (0.9-MM THK)  
12. 165-2141 M [2] BOLT (M8X1.25X20-MM)  
13. 183-3353 [2] BOLT  
14. 293-3246 Y [1] PUMP GP-FUEL INJECTION  
15. 229-2288 [1] LINE AS-FUEL INJECTION (CYL NO. 1)  
16. 229-2289 [1] LINE AS-FUEL INJECTION (CYL NO. 2)  
17. 229-2290 [1] LINE AS-FUEL INJECTION (CYL NO. 3)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30700123
 

252-6987: PUMP GP-FUEL INJECTION

252-6987 PUMP GP-FUEL INJECTION
PART OF 155-7987, 202-0109 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i02230271 SEBP3070
2526987 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 242-5027 [3] HOLDER  
2. 205-4726 [1] BOLT-SPECIAL (BANJO)  
3. 205-4727 [2] WASHER  
4. 205-4728 [1] CONNECTOR  
   
  317-6265 F [3] SEAL-O-RING  
  205-4720 F [3] SPRING  
  205-4721 F [3] WASHER  
  205-4723 F [3] VALVE  
  F   NOT SHOWN
 

#SEBP30700124
 

293-3246: PUMP GP-FUEL INJECTION

293-3246 PUMP GP-FUEL INJECTION
PART OF 229-2292 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i02537943 SEBP3070
2933246 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-4726 [1] BOLT-SPECIAL (BANJO)  
2. 205-4727 [2] WASHER  
3. 205-4728 [1] CONNECTOR  
4. 419-7640 [1] SOLENOID AS (12-VOLT)(FUEL SHUTOFF)  
 

#SEBP30700125
 

197-8538: PUMP GP-FUEL PRIMING

197-8538 PUMP GP-FUEL PRIMING
i01427317 SEBP3070
1978538 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-8540 [1] PUMP GP-FUEL PRIMING  
 

#SEBP30700126
 

202-1241: PUMP GP-FUEL TRANSFER

202-1241 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
i01528417 SEBP3070
2021241 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-2606 [1] GASKET  
2. 153-6872 [3] BOLT  
3. 153-6873 [1] BOLT  
4. 153-6874 [2] CONNECTION  
5. 295-4070 [1] PUMP AS-FUEL TRANSFER  
6. 197-8540 [1] PUMP GP-FUEL PRIMING  
 

#SEBP30700127
 

163-3362: ALTERNATOR GP-CHARGING

163-3362 ALTERNATOR GP-CHARGING -12 VOLT
PART OF 168-8983 ALTERNATOR GP-CHARGING
i02410263 SEBP3070
1633362 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-3276 [1] REGULATOR AS-ALTERNATOR  
2. 271-3277 [1] RECTIFIER AS-ALTERNATOR  
3. 271-3278 [1] BRACKET-ALTERNATOR  
4. 271-3279 [1] ROTOR AS-ALTERNATOR  
5. [1] STATOR  
6. 271-3284 [1] FAN-ALTERNATOR  
7. 183-4040 [1] ALTERNATOR GP-CHARGING (12-VOLT)  
   
  168-8995 F [1] PULLEY-ALTERNATOR  
  168-8997 F [1] WASHER  
  168-9004 F [1] SPACER  
   
    AVAILABLE REPAIR KIT(S):
  271-3281 [1] KIT-HARDWARE (BOLTS)  
  271-3282 [1] KIT-HARDWARE (ALTERNATOR AIR)(SUNDRY)  
  271-3283 [1] KIT-TERMINAL  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30700128
 

168-8983: ALTERNATOR GP-CHARGING

168-8983 ALTERNATOR GP-CHARGING -12 VOLT
i01091791 SEBP3070
1688983 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5592 M [3] NUT (M8X1.25-THD)  
2. 153-6375 M [3] BOLT (M8X1.25X16-MM)  
3. 163-3362 Y [1] ALTERNATOR GP-CHARGING  
4. 163-5372 [3] WASHER (8X15.4X4-MM THK)  
5. 168-8990 [1] BRACKET  
6. 168-8992 [2] BOLT  
7. 168-9004 [1] SPACER (6.5MM THICK)  
8. 168-8995 [1] PULLEY-ALTERNATOR  
9. 168-8997 [1] WASHER  
10. 162-2468 [1] V-BELT (ALTERNATOR)  
11. 168-8999 [1] LEVER  
12. 168-9000 [1] BOLT  
13. 168-9001 M [1] BOLT (M8X1.25X25-MM)  
14. 168-9002 [1] WASHER (8.4X26X3.2-MM THK)  
15. 168-9003 [1] SPACER (5.5MM THICK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30700129
 

202-0115: ALTERNATOR GP-CHARGING

202-0115 ALTERNATOR GP-CHARGING -12-VOLT
i01528581 SEBP3070
2020115 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3013 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5592 M [2] NUT (M8X1.25-THD)  
2. 153-6375 M [3] BOLT (M8X1.25X16-MM)  
3. 155-7984 [1] WASHER (8.4X16X1.6-MM THK)  
4. 163-5372 [2] WASHER (8X15.4X4-MM THK)  
5. 168-8990 [1] BRACKET  
6. 168-8992 [1] BOLT  
7. 168-8995 [1] PULLEY-ALTERNATOR  
8. 168-8997 [1] WASHER  
9. 168-8999 [1] LEVER  
10. 168-9000 [1] BOLT  
11. 168-9001 M [2] BOLT (M8X1.25X25-MM)  
12. 168-9002 [1] WASHER (8.4X26X3.2-MM THK)  
13. 203-5624 [1] SPACER  
14. 168-9004 [1] SPACER  
15. 162-2468 [1] V-BELT (ALTERNATOR)  
17. 183-4040 [1] ALTERNATOR GP-CHARGING (12-VOLT)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
New Supplier for Glow Plugs {1254, 1254, 1412}
2006/04/10
Support for Fuel Injection Pumps {1251}
2008/07/14
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3003, 3013, 3014 and 3024 Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Nozzles
3003, 3013, 3014 and 3024 Industrial Engines
Fuel Injection Pump
3003, 3013, 3014 and 3024 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Timing - Check
3003, 3013, 3014 and 3024 Industrial Engines
Fuel Injection Nozzle - Test
3003, 3013, 3014 and 3024 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump - Remove
3003, 3013, 3014 and 3024 Industrial Engines
Fuel Injection Pump - Install
3003, 3013, 3014 and 3024 Industrial Engines
Fuel Injection Nozzles - Remove - 3013, 3014 and 3024 Engines
3003, 3013, 3014 and 3024 Industrial Engines
Fuel Injection Nozzles - Install - 3013, 3014 and 3024 Engines
3003, 3013, 3014 and 3024 Industrial Engines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3013 :

PUMP GP-FILTER & FUEL TRANSFER
183-4324 PUMP GP-FILTER & FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
176-7711 PUMP & MTG GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
176-7711 PUMP & MTG GP-FUEL TRANSFER
GOVERNOR GP
235-5724 GOVERNOR GP
GOVERNOR GP
229-2240 GOVERNOR GP
GOVERNOR GP
197-8935 GOVERNOR GP
GOVERNOR GP
183-3718 GOVERNOR GP
GOVERNOR GP
155-7998 GOVERNOR GP
PUMP GP-FUEL INJECTION
202-0109 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
229-2292 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
252-6987 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
293-3246 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
197-8538 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
202-1241 PUMP GP-FUEL TRANSFER
ALTERNATOR GP-CHARGING
163-3362 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
168-8983 ALTERNATOR GP-CHARGING

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.