115-9382 CAMSHAFT GP S/N 7ZR4337-UP PART OF 163-5639 ENGINE AR-CORE 345B II EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[2]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	118-0459	[1]	COVER
6.	129-2888	[1]	CAMSHAFT AS
7.	1B-8705	[1]	KEY-WOODRUFF
8.	6I-3733	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
9.	128-0411	[1]	JOURNAL
10.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
11.	9X-2097 M	[3]	STUD (M8X1.25-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP30750011

132-3215: COVER GP-AIR COMPRESSOR

COVER GP-AIR COMPRESSOR

132-3215 COVER GP-AIR COMPRESSOR
S/N 7ZR4337-UP
PART OF 163-5640 ENGINE AR-COMPLETE

i01065793 SEBP3075

1323215 COVER GP-AIR COMPRESSOR Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	117-0218	[1]	COVER
2.	117-0219	[1]	GASKET
3.	6V-8197 M	[3]	BOLT (M12X1.75X40-MM)
4.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	9S-8008	[1]	PLUG (1-1/16-12-THD)
6.	9S-8002	[1]	PLUG (7/16-20-THD)
7.	6V-5048	[1]	SEAL-O-RING
8.	9S-8005	[1]	PLUG (3/4-16-THD)
9.	6V-6609	[1]	SEAL-O-RING
10.	6V-5063	[1]	SEAL-O-RING
11.	161-7281	[1]	HOSE-FUMES DISPOSAL
12.	9M-2904	[1]	CLAMP-HOSE
13.	2S-2053	[1]	CLIP
14.	6V-3251	[1]	SEAL-O-RING
15.	9S-8006	[1]	PLUG (7/8-14-THD)
	M		METRIC PART

#SEBP30750012

115-2985: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

115-2985 COVER GP-CYLINDER BLOCK
S/N 7ZR4337-UP
PART OF 163-5640 ENGINE AR-COMPLETE

i01063048 SEBP3075

1152985 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4P-6587	[1]	COVER
2.	6V-5217 M	[2]	BOLT (M8X1.25X20-MM)
3.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
4.	6V-1250	[1]	SEAL-O-RING
	M		METRIC PART

#SEBP30750013

127-5728: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N 7ZR4337-UP
PART OF 163-5640 ENGINE AR-COMPLETE
Type 1

i01065790 SEBP3075

1275728 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	483-0773	[1]	COVER

#SEBP30750014

127-5728: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N 7ZR4337-UP
PART OF 163-5640 ENGINE AR-COMPLETE
Type 2

i06589338 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9Y-6089 C	[1]	GASKET
2.	0S-1589 C	[3]	BOLT (5/8-11X1.75-IN)
3.	4D-3704 C	[3]	WASHER-HARD (17X30X5-MM THK)
4.	4N-1114 C	[1]	COVER
	C		CHANGE FROM PREVIOUS TYPE

#SEBP30750015

136-4307: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

136-4307 COVER GP-FRONT HOUSING
S/N 7ZR4337-UP
PART OF 163-5639 ENGINE AR-CORE

i01063473 SEBP3075

1364307 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4P-1650	[1]	COVER
2.	1H-7339	[1]	SEAL-O-RING
3.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
4.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP30750016

117-2743: CRANKSHAFT GP

CRANKSHAFT GP

117-2743 CRANKSHAFT GP
S/N 7ZR4337-4904
PART OF 163-5639 ENGINE AR-CORE

i00670343 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	116-1109 J	[3]	BEARING-MAIN
	128-0382 AB	[1]	BEARING-MAIN (0.51-MM US)
	128-0383 AB	[1]	BEARING-MAIN (0.76-MM US)
	128-0384 AB	[1]	BEARING-MAIN (0.51-MM OS)
	128-0385 AB	[1]	BEARING-MAIN (0.51-MM OS, 0.51-MM US)
2.	116-1107 J	[2]	PLATE-THRUST
3.	116-1108 J	[4]	BEARING-MAIN
	128-0400 AB	[1]	BEARING-MAIN (0.51-MM US)
	128-0401 AB	[1]	BEARING-MAIN (0.76-MM US)
	128-0402 AB	[1]	BEARING-MAIN (0.51-MM OS)
	128-0403 AB	[1]	BEARING-MAIN (0.51-MM OS, 0.51-MM US)
4.	151-2920	[1]	CRANKSHAFT AS
5.	6V-3536	[1]	DOWEL
6.	160-8143	[1]	GEAR-CRANKSHAFT (48-TEETH)
	9Y-0810 F	[1]	SLEEVE-WEAR (REAR SEAL)
	9Y-0821 F	[1]	SLEEVE (FRONT SEAL)

			AVAILABLE REPAIR KIT(S):
	196-9521 J		BEARING GP-MAIN (CRANKSHAFT)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP30750017

117-2743: CRANKSHAFT GP

CRANKSHAFT GP

117-2743 CRANKSHAFT GP
S/N 7ZR4905-UP
PART OF 163-5639 ENGINE AR-CORE

i04714852 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	211-0588 J	[3]	BEARING-MAIN (STANDARD)
	128-0382 AB		BEARING-MAIN (0.51-MM US)
	128-0383 AB		BEARING-MAIN (0.76-MM US)
	128-0384 AB		BEARING-MAIN (0.51-MM OS)
	128-0385 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
2.	246-3144 J	[2]	PLATE-THRUST
3.	211-0587 J	[4]	BEARING-MAIN (STANDARD)
	128-0400 AB		BEARING-MAIN (0.51-MM US)
	128-0401 AB		BEARING-MAIN (0.76-MM US)
	128-0402 AB		BEARING-MAIN (0.51-MM OS)
	128-0403 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
4.	326-4278 C	[1]	CRANKSHAFT AS
4A.	6V-3536	[1]	DOWEL
4B.	187-8972	[1]	GEAR-CRANKSHAFT (48-TEETH)
4C.	9Y-0821	[1]	SLEEVE (FRONT)
4D.	9Y-0810	[1]	SLEEVE-WEAR (REAR)

			AVAILABLE REPAIR KIT(S):
	196-9521 J		BEARING GP-MAIN (CRANKSHAFT)(STANDARD)
			(INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP30750018

148-2062: CYLINDER BLOCK AS

CYLINDER BLOCK AS

148-2062 CYLINDER BLOCK AS
S/N 7ZR4337-6108
PART OF 148-2095 CYLINDER BLOCK AS

i01061097 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	130-0872	[1]	BUSHING
2.	179-9880	[1]	BLOCK AS
3.	117-0166	[7]	CAP-BEARING
4.	175-0454 M	[14]	BOLT (M16X2X160-MM)(M16X160MM)
5.	5P-8247	[14]	WASHER-HARD (17X32X3.5-MM THK)
6.	128-0417	[1]	BUSHING
7.	128-0416	[5]	BUSHING
	M		METRIC PART