170-6850 WIRING GP-REFUELING PUMP S/N AKJ1-UP; AKX1-UP PART OF 158-0073 PUMP AR-REFUELING Type 2 AN ATTACHMENT 345B II

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 170-6850 WIRING GP-
1. 117-2760 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

2. 169-5543 DRIVE GP-F
3. 169-5543 DRIVE GP-F
4. 169-5543 DRIVE GP-F
5. 169-5558 DRIVE GP-F
6. 200-3487 DRIVE GP-F
7. 200-3488 DRIVE GP-F
8. 200-3502 DRIVE GP-F

POWER TRAIN AR

9. 169-5524 POWER TRAI
0. INFORMATION

EXCAVATOR 345B II EXCAVATOR AKJ
345B & 345B L Series II Excavators AKJ00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3075 345B II AKJ (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

150-7025 WIRING GP-RADIO

170-6850 WIRING GP-REFUELING PUMP

117-2760 WIRING GP-UNIT INJECTOR

#SEBP30750220

170-6850: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

170-6850 WIRING GP-REFUELING PUMP
S/N AKJ1-UP; AKX1-UP
PART OF 158-0073 PUMP AR-REFUELING
Type 2
AN ATTACHMENT

i02635792 SEBP3075

1706850 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	9X-8256 C	[2]	WASHER (6.6X12X2-MM THK)
3.	111-4836	[3]	CLIP
4.	8T-0328 C	[3]	WASHER-HARD (5.5X10X1-MM THK)
5.	116-0095	[1]	SWITCH AS (REFUELING PUMP, START)
	1S-0812	[2]	SCREW-TAPPING
	3K-0835	[1]	NUT (5/8-24-THD)
	6F-0253	[1]	LOCKWASHER
	8T-8748	[1]	ADAPTER-MOUNT
	116-0096	[1]	HARNESS AS-WIRING (REFUELING PUMP, START)
6.	116-0097	[1]	SWITCH AS (REFUELING PUMP, STOP)
	1S-0812	[2]	SCREW-TAPPING
	3K-0835	[1]	NUT (5/8-24-THD)
	6F-0253	[1]	LOCKWASHER
	8T-8748	[1]	ADAPTER-MOUNT
	116-0098	[1]	HARNESS AS-WIRING (REFUELING PUMP, STOP)
7.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4171 CM	[2]	BOLT (M6X1X12-MM)
9.	116-0118 C	[3]	CLIP
10.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
11.	132-1827	[1]	WIRE AS
12.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
12A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
13.	213-0772 C	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
14.	238-2344 C	[1]	HARNESS AS-PUMP
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[4]	STRAP-CABLE
	116-0128	[2]	SEAL
	121-1022	[1]	DIODE
	121-1038	[1]	HOUSING-RECEPTACLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
15.	9X-3495	[2]	CLIP AS
16.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
17.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
18.	5C-5302 CM	[2]	SCREW (M5X0.8X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP30750221

117-2760: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 7ZR4337-UP
PART OF 163-5639 ENGINE AR-CORE

i01063351 SEBP3075

1172760 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4P-9537	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
	103-8133	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	2V-3216	[4]	CLIP
3.	7X-2468	[3]	CLIP
4.	7E-6508	[6]	CAP AS
5.	6V-8214 M	[9]	BOLT (M6X1X20-MM)
6.	5P-0537	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART

#SEBP30750222

169-5543: DRIVE GP-FINAL

DRIVE GP-FINAL

169-5543 DRIVE GP-FINAL -WITH MOTOR
S/N AKJ1-184; AKX1-251
PART OF 169-5524 POWER TRAIN AR

i01284253 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	169-5558 Y	[1]	DRIVE GP-FINAL
2.	165-9333 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP30750223

169-5543: DRIVE GP-FINAL

DRIVE GP-FINAL

169-5543 DRIVE GP-FINAL -WITH MOTOR
S/N AKJ185-UP; AKX252-UP
PART OF 169-5524 POWER TRAIN AR
Type 1

i01744978 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	200-3487 CY	[1]	DRIVE GP-FINAL
2.	165-9333 Y	[1]	MOTOR & MTG GP-TRAVEL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP30750224

169-5543: DRIVE GP-FINAL

DRIVE GP-FINAL

169-5543 DRIVE GP-FINAL -WITH MOTOR
S/N AKJ185-UP; AKX252-UP
PART OF 169-5524 POWER TRAIN AR
Type 2

i01891304 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	200-3502 CY	[1]	DRIVE GP-FINAL
2.	165-9333 Y	[1]	MOTOR & MTG GP-TRAVEL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP30750225

169-5558: DRIVE GP-FINAL

DRIVE GP-FINAL

169-5558 DRIVE GP-FINAL -WITHOUT MOTOR
S/N AKJ1-184; AKX1-251
PART OF 169-5543 DRIVE GP-FINAL

i01284566 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	169-5562	[1]	HOUSING-MOTOR
2.	9W-9230	[1]	SEAL GP-DUO-CONE
3.	2R-0525	[2]	CUP-BEARING
4.	2R-0524	[2]	CONE-BEARING
5.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
6.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
7.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
10.	114-1541	[6]	PIN-DOWEL
11.	136-2807	[1]	HOUSING
12.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
13.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
14.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
15.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
16.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
17.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
18.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
19.	7Y-1479 B	[1]	SHIM (1-MM THK)
20.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
21.	169-5560	[1]	GEAR-COUPLING (74-TEETH)
22.	8C-5240	[1]	SEAL-O-RING
23.	7Y-1482	[1]	CARRIER-PLANETARY
24.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
25.	110-7217	[2]	RING-RETAINING
26.	7Y-1485	[1]	CARRIER-PLANETARY
27.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
28.	7Y-1487	[1]	GEAR-RING (85-TEETH)
29.	7M-8485	[2]	SEAL-O-RING
30.	3E-2338	[2]	PLUG-PIPE
31.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
32.	169-5559	[1]	GEAR-SUN (26-TEETH)
33.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
34.	094-1516	[3]	BEARING-ROLLER
35.	8T-4240	[3]	RING-RETAINING
36.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
37.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
38.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
39.	7Y-1498	[1]	COVER
40.	7Y-0661	[3]	SHAFT-PLANETARY
41.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
42.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
43.	7Y-1499 B	[3]	GEAR-PLANETARY (20-TEETH)
44.	1U-8846 B		SEALANT-GASKET
46.	7Y-1483	[1]	GEAR-RING (63-TEETH)
47.	7Y-0664	[11]	BEARING AS-ROLLER
48.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
49.	095-0891	[7]	PIN-SPRING
50.	7Y-0662	[4]	SHAFT-PLANETARY
51.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
52.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP30750226

200-3487: DRIVE GP-FINAL

DRIVE GP-FINAL

200-3487 DRIVE GP-FINAL -WITHOUT MOTOR
S/N AKJ185-UP; AKX252-UP
PART OF 169-5543, 200-3488 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@200-3488@@@@@

i01744985 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	200-3489	[1]	HOUSING-MOTOR
2.	9W-9230	[1]	SEAL GP-DUO-CONE
3.	2R-0525	[2]	CUP-BEARING
4.	2R-0524	[2]	CONE-BEARING
5.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
6.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
7.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
10.	114-1541	[6]	PIN-DOWEL
11.	200-3490	[1]	HOUSING-GEAR
12.	7Y-1473 J	[1]	SHIM (0.3-MM THK)
13.	7Y-1476 J	[1]	SHIM (0.6-MM THK)
14.	7Y-1477 J	[1]	SHIM (0.7-MM THK)
15.	7Y-1478 J	[1]	SHIM (0.8-MM THK)
16.	7Y-1479 J	[1]	SHIM (1-MM THK)
17.	169-5560	[1]	GEAR-COUPLING (74-TEETH)
18.	8C-5240	[1]	SEAL-O-RING
19.	7Y-1482	[1]	CARRIER-PLANETARY
20.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
21.	110-7217	[2]	RING-RETAINING
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
24.	7Y-1487	[1]	GEAR-RING (85-TEETH)
25.	7M-8485	[2]	SEAL-O-RING
26.	3E-2338	[2]	PLUG-PIPE
27.	7Y-1488	[1]	CARRIER AS
27A.	7Y-0656	[3]	SHAFT-PLANETARY
28.	169-5559	[1]	GEAR-SUN (26-TEETH)
29.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
30.	094-1516	[3]	BEARING-ROLLER
31.	8T-4240	[3]	RING-RETAINING
32.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
33.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
34.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
35.	7Y-1498	[1]	COVER
36.	7Y-0661	[3]	SHAFT-PLANETARY
37.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
38.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
39.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
40.	1U-8846 B	[1]	SEALANT-GASKET
41.	7Y-1483	[1]	GEAR-RING (63-TEETH)
42.	7Y-0664	[11]	BEARING AS-ROLLER
43.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
44.	095-0891	[7]	PIN-SPRING
45.	7Y-0662	[4]	SHAFT-PLANETARY
46.	7Y-0808	[1]	SHIM (1.6-MM THK)
47.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)

			AVAILABLE REPAIR KIT(S):
	135-8960 J		KIT-SHIM (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP30750227

200-3488: DRIVE GP-FINAL

DRIVE GP-FINAL

200-3488 DRIVE GP-FINAL
S/N AKJ185-UP; AKX252-UP
FIELD REPLACEMENT FOR @@@@@200-3487@@@@@

i01932095 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Part No	Qty	Parts name
200-3487 Y	[1]	DRIVE GP-FINAL
		S/N AKJ185; AKX252-253
200-3502 Y	[1]	DRIVE GP-FINAL
		S/N AKJ186-UP; AKX254-UP
Y		SEPARATE ILLUSTRATION

#SEBP30750228

200-3502: DRIVE GP-FINAL

DRIVE GP-FINAL

200-3502 DRIVE GP-FINAL -WITHOUT MOTOR
S/N AKJ186-UP; AKX254-UP
PART OF 169-5543, 200-3488 DRIVE GP-FINAL

i01910907 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	200-3489	[1]	HOUSING-MOTOR
2.	205-9025	[1]	SEAL GP-DUO-CONE
3.	2R-0525	[2]	CUP-BEARING
4.	2R-0524	[2]	CONE-BEARING
5.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
6.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
7.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
8.	7Y-1469	[1]	COUPLING
9.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
10.	114-1541	[6]	PIN-DOWEL
11.	200-3490	[1]	HOUSING-GEAR
12.	7Y-1473 BJ	[1]	SHIM (0.3-MM THK)
	7Y-1480 BJ	[1]	SHIM (1.6-MM THK)
	7Y-1476 BJ	[1]	SHIM (0.6-MM THK)
	7Y-1477 BJ	[1]	SHIM (0.7-MM THK)
	7Y-1478 BJ	[1]	SHIM (0.8-MM THK)
	7Y-1479 BJ	[1]	SHIM (1-MM THK)
17.	169-5560	[1]	GEAR-COUPLING (74-TEETH)
18.	8C-5240	[1]	SEAL-O-RING
19.	7Y-1482	[1]	CARRIER-PLANETARY
20.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
21.	110-7217	[2]	RING-RETAINING
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
24.	7Y-1487	[1]	GEAR-RING (85-TEETH)
25.	7M-8485	[2]	SEAL-O-RING
26.	3E-2338	[2]	PLUG-PIPE
27.	7Y-1488	[1]	CARRIER AS
27A.	7Y-0656	[3]	SHAFT-PLANETARY
28.	169-5559	[1]	GEAR-SUN (26-TEETH)
29.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
30.	094-1516	[3]	BEARING-ROLLER
31.	8T-4240	[3]	RING-RETAINING
32.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
33.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
34.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
35.	7Y-1498	[1]	COVER
36.	7Y-0661	[3]	SHAFT-PLANETARY
37.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
38.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
39.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
40.	1U-8846 B		SEALANT-GASKET
41.	7Y-1483	[1]	GEAR-RING (63-TEETH)
42.	7Y-0664	[11]	BEARING AS-ROLLER
43.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
44.	095-0891	[7]	PIN-SPRING
45.	7Y-0662	[4]	SHAFT-PLANETARY
46.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
47.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)

			AVAILABLE REPAIR KIT(S):
	135-8960 J		KIT-SHIM (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP30750229

169-5524: POWER TRAIN AR

POWER TRAIN AR

169-5524 POWER TRAIN AR
S/N AKJ1-UP; AKX1-UP
PART OF 158-0006, 158-0007 GENERAL AR

i02414455 SEBP3075

For full view, you need register

Parts for your 345B II EXCAVATOR:

Part No	Qty	Parts name
169-5528 Y	[1]	DRIVE GP-SWING (LH)
		S/N AKJ1-208; AKX1-395
227-6156 Y	[1]	DRIVE GP-SWING (LH)
		S/N AKJ209-UP; AKX396-UP
169-5529 Y	[1]	DRIVE GP-SWING (RH)
		S/N AKJ1-208; AKX1-395
227-6157 Y	[1]	DRIVE GP-SWING (RH)
		S/N AKJ209-UP; AKX396-UP
169-5526 Y	[1]	FASTENER GP-SWING & FINAL DR
169-5543 Y	[2]	DRIVE GP-FINAL
115-6399 Y	[2]	SPROCKET GP (NON-SEGMENTED)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0091 FMI 02 Incorrect Throttle Switch inputs
3176C Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C Engines for Caterpillar Built Machines

CID 0264 FMI 08 Decel Throttle Position signal abnormal
3176C Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C Engines for Caterpillar Built Machines

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C Engines for Caterpillar Built Machines

Engine Wiring Information
3176C Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
3176C Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C Engines for Caterpillar Built Machines

Decelerator Position Sensor Circuit - Test
3176C Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
3176C Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C Engines for Caterpillar Built Machines

CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines

CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines

CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines

CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C Engines for Caterpillar Built Machines

Wiring Information
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Electrical Connectors - Inspect
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 345B II :

170-6850 WIRING GP-REFUELING PUMP

150-7025 WIRING GP-RADIO

111-4844 WIRING GP-RADIO

121-1099 WIRING GP-POWER WINDOW

183-0992 WIRING GP-LUBRICATION

170-6849 WIRING GP-LUBRICATION

125-4858 WIRING GP-FINE SWING

174-6824 WIRING GP-ELECTRONIC CONTROL

117-2760 WIRING GP-UNIT INJECTOR

169-5543 DRIVE GP-FINAL

169-5558 DRIVE GP-FINAL

200-3487 DRIVE GP-FINAL

200-3488 DRIVE GP-FINAL

200-3502 DRIVE GP-FINAL

Truck sale:

85,215

Caterpillar 345BIIL, Construction
- Crawler Excavators
AVESCO AG
Switzerland

100,561

Caterpillar 345BIIL, Construction
- Crawler Excavators
Parana Equipamentos S.A.
Brazil

Caterpillar 345BIIL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR SP. Z O.O.
Poland

56,000

Caterpillar 345BIIL, Construction
- Crawler Excavators
BUTLER MACHINERY COMPANY

CATERPILLAR 345BII 2003
- TRACK EXCAVATORS
WAGNER EQUIPMENT CO
United States

170-6850 WIRING GP-REFUELING PUMP S/N AKJ1-UP; AKX1-UP PART OF 158-0073 PUMP AR-REFUELING Type 2 AN ATTACHMENT 345B II

ELECTRICAL AND STARTING SYSTEM

170-6850: WIRING GP-REFUELING PUMP

Parts for your 345B II EXCAVATOR:

117-2760: WIRING GP-UNIT INJECTOR

Parts for your 345B II EXCAVATOR:

169-5543: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

169-5543: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

169-5543: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

169-5558: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

200-3487: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

200-3488: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

200-3502: DRIVE GP-FINAL

Parts for your 345B II EXCAVATOR:

169-5524: POWER TRAIN AR

Parts for your 345B II EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 345B II :

Truck sale:

Modal