380-8307 BUCKET AS-MULTIPURPOSE 2.87-CU M (3.75-CU YD) PART OF 380-8308 BUCKET GP-MULTIPURPOSE BUCKET

380-8307 BUCKET AS-MULTIPURPOSE
2.87-CU M (3.75-CU YD)
PART OF 380-8308 BUCKET GP-MULTIPURPOSE

i05774526 SEBP3078

3808307 BUCKET AS-MULTIPURPOSE Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	3B-8488	[2]	FITTING-GREASE (1/8-27 PTF)
2.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)
3.	4T-0731	[1]	EDGE-CUTTING
4.	4T-6659	[2]	EDGE-CUTTING
5.	8D-6234	[4]	BUSHING-FLANGE
6.	110-4628	[2]	TEE-UNION
7.	159-8035	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK)
8.	180-6397	[2]	TUBE
9.	7K-9205	[4]	SEAL-LIP TYPE
10.	6V-9746	[2]	SEAL-O-RING
11.	6V-9169	[2]	NUT (13/16-16-THD)
12.	268-3314	[1]	BOWL AS-BUCKET
12A.	7J-9344	[4]	BUSHING
12B.	8E-5300	[1]	CORNER (RH)
12C.	8E-5301	[1]	CORNER (LH)
12D.	141-4847	[1]	EDGE
12E.	268-3334	[1]	BAR-STOP
12F.		[4]	PLATE-WEAR
13.	6V-8625	[4]	ELBOW
14.	6V-8398	[8]	SEAL-O-RING
15.	6H-1717	[4]	BOLT (1/2-13X1.125-IN)
16.	332-2788	[2]	FILM-WARNING (DO NOT LIFT, READ OMM)
17.	380-8306	[1]	BULLDOZER AS-MULTIPURPOSE BKT
17A.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
17B.	7J-2931	[2]	BOSS (1/2-13X1.375-IN)
17C.	147-7633 M	[3]	BOSS-TAPPED (M20X2.5X38-MM)
17D.	279-1020	[1]	PLATE (PROTECTOR)
17E.	380-8534	[2]	PLATE
17F.	380-8536	[1]	PLATE
17G.	380-8537	[2]	PLATE
18.	382-3865	[2]	PIN AS
19.	382-3866	[2]	PIN AS
20.	382-5007 Y	[2]	CYLINDER GP-BUCKET
21.	4F-7827	[19]	BOLT-PLOW (3/4-10X2.25-IN)
22.	3K-0360	[4]	SEAL-O-RING
23.	2J-3506	[19]	NUT-FULL (3/4-10-THD)
24.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
25.	180-6391	[2]	PIN
26.	0S-1573	[2]	BOLT (1/2-13X4-IN)
27.	382-6636 I	[1]	HOSE AS
28.	382-6637 I	[1]	HOSE AS
29.	382-6638 I	[1]	HOSE AS
30.	382-6639 I	[1]	HOSE AS
31.	382-6640 I	[2]	HOSE AS

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30780021

387-7785: BUCKET AS-MULTIPURPOSE

387-7785 BUCKET AS-MULTIPURPOSE
7.7-CU M (10-CU YD)
PART OF 387-7787 BUCKET GP-MULTIPURPOSE

i05341277 SEBP3078

3877785 BUCKET AS-MULTIPURPOSE Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	6W-2889	[2]	FITTING AS (QUICK DISCONNECT, FEMALE)
	9C-6250	[1]	SEAL-O-RING
	9C-6251	[1]	SEAL-O-RING
2.	6W-2891	[2]	PLUG AS
3.	8T-7913	[8]	ADAPTER
4.	159-8035	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK)
5.	177-3005	[2]	ADAPTER AS
	6V-9746	[1]	SEAL-O-RING
	163-3343	[1]	SEAL
6.	190-5665 I	[2]	HOSE AS
7.	220-0514	[2]	PIN
8.	220-0516	[2]	PIN
9.	220-0517	[2]	PIN
10.	220-0519	[2]	BUFFER
11.	220-0525 Y	[2]	CYLINDER GP-BUCKET
13.	220-3928 I	[2]	HOSE AS
14.	220-3929 I	[2]	HOSE AS
16.	270-8507 I	[2]	HOSE AS
17.	270-8508 I	[2]	HOSE AS
18.	Y	[1]	BUCKET AS-MULTIPURPOSE (HIGH DUMP)
19.	387-7784	[1]	CARRIAGE AS
	095-0948	[4]	FITTING-GREASE
	364-1076	[4]	BUSHING
20.	2P-1293	[2]	LOCKNUT (1-3/16-12-THD)
21.	3K-0360	[8]	SEAL-O-RING
22.	6V-0407	[8]	SEAL-BONDED
23.	6V-8398	[16]	SEAL-O-RING
24.	6V-8639	[4]	CONNECTOR
25.	6V-8942	[4]	REDUCER-O-RING
26.	6V-8981	[4]	ELBOW
27.	6V-9160	[2]	TEE-FACE SEAL
28.	6V-9169	[4]	NUT (13/16-16-THD)
29.	6V-9746	[6]	SEAL-O-RING
30.	7X-2553 M	[2]	BOLT (M16X2X40-MM)
31.	7X-2557 M	[6]	BOLT (M16X2X140-MM)
32.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
33.	8T-4133 M	[8]	NUT (M10X1.5-THD)
34.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
35.	8T-4778 M	[6]	LOCKNUT (M16X2-THD)
36.	9S-4185	[4]	PLUG (3/4-16-THD)
37.	9X-6580	[4]	NUT (1-3/16-12-THD)
38.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30780022

394-2360: BUCKET AS-MULTIPURPOSE

394-2360 BUCKET AS-MULTIPURPOSE
8.2-CU M (10.7-CU YD)
PART OF 394-2361 BUCKET GP-MULTIPURPOSE

i05316332 SEBP3078

3942360 BUCKET AS-MULTIPURPOSE Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	394-2352	[1]	PLATE AS-SIDE (LH)
1A.	393-5830	[1]	PLATE-SIDE BAR
2.	360-4652	[1]	EDGE-CUTTING
3.	394-2350	[1]	PLATE AS-SIDE (RH)
3A.	393-5827	[1]	PLATE-SIDE BAR
4.	393-5818	[2]	PLATE-WEAR

#SEBP30780023

426-3434: BUCKET AS-MULTIPURPOSE

426-3434 BUCKET AS-MULTIPURPOSE
1.91-CU M (2.50-CU YD)
PART OF 426-3435 BUCKET GP-MULTIPURPOSE

i05877517 SEBP3078

4263434 BUCKET AS-MULTIPURPOSE Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	3B-8488	[2]	FITTING-GREASE (1/8-27 PTF)
2.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)
3.	4T-2983	[2]	EDGE-CUTTING
4.	6W-2889	[2]	FITTING AS (QUICK DISCONNECT, FEMALE)
			(EACH INCLUDES)
	9C-6250	[1]	SEAL-O-RING
	9C-6251	[1]	SEAL-O-RING
5.	6W-2891	[2]	PLUG AS
6.	8D-6234	[4]	BUSHING-FLANGE
7.	159-8035	[2]	FILM-WARNING (CRUSH HAZARD, STAY BACK)
8.	177-3005	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	163-3343	[1]	SEAL
9.	180-6397	[2]	TUBE
10.	180-9338 Y	[2]	CYLINDER GP-BUCKET
11.	183-2160	[2]	PIN AS
12.	183-2161	[2]	PIN AS
13.	221-0768 I	[2]	HOSE AS
14.	9X-6580	[4]	NUT (1-3/16-12-THD)
15.	9X-0941	[4]	LOCKNUT (1/2-13-THD)
16.	7K-9205	[4]	SEAL-LIP TYPE
17.	7K-9204	[4]	SEAL-LIP TYPE
18.	364-3545	[1]	EDGE-CUTTING
19.	426-3417	[1]	BOWL AS
	8E-5300	[1]	CORNER (RH)
	8E-5301	[1]	CORNER (LH)
	7J-9344	[4]	BUSHING
20.	426-3431	[1]	BUCKET AS-MULTIPURPOSE
	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
	338-5082	[1]	PLATE
	338-5083	[1]	PLATE
21.	427-2335	[2]	EDGE-CUTTING
22.	428-8995 I	[2]	HOSE AS
23.	428-8996 I	[2]	HOSE AS
24.	0S-1585	[2]	BOLT (1/2-13X1.5-IN)
25.	180-6391	[2]	PIN
26.	1A-1460	[2]	BOLT (1/2-13X2-IN)
27.	1D-4569	[2]	BOLT (1/2-13X4.25-IN)
28.	2P-1293	[2]	LOCKNUT (1-3/16-12-THD)
29.	3D-2824	[4]	SEAL-O-RING
30.	3F-5108	[19]	BOLT-PLOW (5/8-11X2.25-IN)
31.	4K-0367	[19]	NUT-FULL (5/8-11-THD)
32.	6V-8398	[8]	SEAL-O-RING
33.	6V-8633	[4]	CONNECTOR
34.	6V-8942	[4]	REDUCER-O-RING
35.	6V-9160	[2]	TEE-FACE SEAL
36.	6V-9746	[6]	SEAL-O-RING
37.	7K-9202	[4]	SEAL-LIP TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP30780024

162-0709: BUCKET AS-REFUSE

BUCKET AS-REFUSE

162-0709 BUCKET AS-REFUSE
2.4-CU M (3.14-CU YD)
PART OF 162-0710 BUCKET GP-REFUSE

i04529085 SEBP3078

For full view, you need register

Parts for your BUCKET:

Part No	Qty	Parts name
4V-1544	[1]	CORNER (RH)
4V-1545	[1]	CORNER (LH)
9V-6572	[1]	EDGE-CUTTING

#SEBP30780025

155-6183: BUCKET AS-SIDE DUMP

155-6183 BUCKET AS-SIDE DUMP
2.7-CU M (3.5-CU YD)
PART OF 155-6184 BUCKET GP-SIDE DUMP

i04086491 SEBP3078

1556183 BUCKET AS-SIDE DUMP Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	3B-4508	[4]	LOCKWASHER
2.	2H-6488	[4]	BOLT (1/2-13X5-IN)
3.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)
4.	0S-1594	[2]	BOLT (3/8-16X1-IN)
5.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	030-7947	[1]	ADAPTER-ELBOW
7.	7X-0290	[2]	BOLT (3/8-16X3.5-IN)
8.	3B-8488	[1]	FITTING-GREASE (1/8-27 PTF)
9.	1P-4576	[4]	FLANGE-HALF
10.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
11.	0S-1595	[1]	BOLT (1/2-13X1.25-IN)
12.	5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-9377	[4]	BOLT (3/8-16X2.25-IN)
14.	1F-7958	[4]	NUT-FULL (1/2-13-THD)
15.	4J-0522	[2]	SEAL-O-RING
16.	4J-5267	[2]	SEAL-O-RING
17.	5J-9889	[2]	BUSHING
18.	7K-9205	[8]	SEAL-LIP TYPE
19.	0S-1619	[2]	BOLT (3/8-16X3-IN)
20.	9S-4191	[1]	PLUG (9/16-18-THD)
21.	3J-1907	[1]	SEAL-O-RING
22.	9V-6575	[1]	EDGE-CUTTING
23.	8E-5310	[1]	PLATE-CORNER (RH)

#SEBP30780026

178-9039: BUCKET AS-SIDE DUMP

178-9039 BUCKET AS-SIDE DUMP -HIGH LIFT
FOR USE WITH MACHINES EQUIPPED WITH HYDRAULIC THIRD VALVE ARRANGEMENT, CWTI HYDRAULIC COUPLERS

i04092769 SEBP3078

1789039 BUCKET AS-SIDE DUMP Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	6W-8583	[2]	BEARING
2.	7K-9209	[4]	SEAL-LIP TYPE
3.	240-1894	[1]	PLATE
4.		[1]	CARRIAGE AS
4A.	145-6590	[2]	EAR
4B.	168-7845	[1]	PLATE
4C.	170-1279	[2]	HOOK AS
5.	188-3120 Y	[1]	CYLINDER GP-BUCKET
6.	4J-5267	[4]	SEAL-O-RING
7.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	170-6709	[1]	VALVE GP-COUNTERBALANCE
8A.	175-7540	[1]	VALVE AS-COUNTERBALANCE
8B.	175-7541	[1]	BODY-VALVE
9.	169-9654	[1]	BLOCK-PORT
10.	3B-8489	[5]	FITTING-GREASE (1/8-27 PTF)
11.	0S-1595	[1]	BOLT (1/2-13X1.25-IN)
12.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1619	[2]	BOLT (3/8-16X3-IN)
14.	7X-0290	[2]	BOLT (3/8-16X3.5-IN)
15.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
16.	8T-9377	[4]	BOLT (3/8-16X2.25-IN)
17.	1P-4576	[4]	FLANGE-HALF
18.	6V-8724	[1]	ELBOW
19.	6V-8636	[1]	CONNECTOR
20.	169-5923 I	[1]	HOSE AS
21.	169-5924 I	[1]	HOSE AS
22.	9S-4191	[1]	PLUG (9/16-18-THD)
23.	7K-9205	[4]	SEAL-LIP TYPE
24.	7X-0336	[2]	BOLT (1/2-13X5.5-IN)
25.	6V-8188	[2]	NUT (1/2-13-THD)
26.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
28.	3B-4508	[2]	LOCKWASHER
29.	2H-6488	[2]	BOLT (1/2-13X5-IN)
30.	3J-1907	[3]	SEAL-O-RING
31.	6V-8397	[4]	SEAL-O-RING
32.	6V-9746	[2]	SEAL-O-RING
33.	086-2746	[2]	CONNECTOR
34.	6V-0408	[2]	SEAL-BONDED
35.	6W-2889	[2]	FITTING AS (QUICK DISCONNECT, FEMALE)
35A.	9C-6250	[1]	SEAL-O-RING
35B.	9C-6251	[1]	SEAL-O-RING
36.	6W-2891	[2]	PLUG AS
37.	138-6541	[1]	EDGE-CUTTING
38.	4V-7175	[1]	CORNER

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP30780027

178-9040: BUCKET AS-SIDE DUMP

178-9040 BUCKET AS-SIDE DUMP -PIN-ON FLAT FLOOR
3658-MM (144-IN) WIDE X 3.4-CU M (4.5-CU YD) CAPACITY
FOR USE WITH MACHINES EQUIPPED WITH HYDRAULIC THIRD VALVE ARRANGEMENT

i04093169 SEBP3078

1789040 BUCKET AS-SIDE DUMP Parts scheme

For full view, you need register

Parts for your BUCKET:

Pos.	Part No	Qty	Parts name
1.	6W-8583	[2]	BEARING
2.	7K-9209	[4]	SEAL-LIP TYPE
3.	188-3120 Y	[1]	CYLINDER GP-BUCKET
4.	0S-1594	[2]	BOLT (3/8-16X1-IN)
5.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	170-6709	[1]	VALVE GP-COUNTERBALANCE
6A.	175-7540 J	[1]	VALVE AS-COUNTERBALANCE
6B.	175-7541	[1]	BODY-VALVE
7.	169-9654	[1]	BLOCK-PORT
8.	3B-8489	[5]	FITTING-GREASE (1/8-27 PTF)
9.	0S-1595	[1]	BOLT (1/2-13X1.25-IN)
10.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	0S-1619	[2]	BOLT (3/8-16X3-IN)
12.	7X-0290	[2]	BOLT (3/8-16X3.5-IN)
13.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
14.	8T-9377	[4]	BOLT (3/8-16X2.25-IN)
15.	1P-4576	[4]	FLANGE-HALF
16.	6V-8724	[1]	ELBOW
17.	6V-8636	[1]	CONNECTOR
18.	9S-4191	[1]	PLUG (9/16-18-THD)
19.	7K-9205	[4]	SEAL-LIP TYPE
20.	7X-0336	[2]	BOLT (1/2-13X5.5-IN)
21.	6V-8188	[2]	NUT (1/2-13-THD)
22.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
24.	3B-4508	[2]	LOCKWASHER
25.	2H-6488	[2]	BOLT (1/2-13X5-IN)
26.	3J-1907	[3]	SEAL-O-RING
27.	6V-8397	[4]	SEAL-O-RING
28.	4J-0522	[2]	SEAL-O-RING
29.	172-3491	[2]	BLOCK
30.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
31.	5P-7466	[2]	CLIP (SLOT)
32.	5P-7467	[2]	CLIP (TAB)
33.	5P-8112	[2]	GROMMET
34.	138-6541	[1]	EDGE-CUTTING
35.	177-7905	[3]	PLATE-WEAR
36.	4V-7175	[1]	CORNER
37.		[1]	CARRIAGE AS
37A.	147-7633 M	[3]	BOSS-TAPPED (M20X2.5X38-MM)
37B.	163-8833	[2]	BOSS (89.1X152.4X44.5-MM THK)
37C.	163-8834	[4]	BOSS (63.7X152.4X59.2-MM THK)
38.	160-6888 I	[1]	HOSE AS
39.	160-6889 I	[1]	HOSE AS
40.	4J-5267	[4]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	077-7427 J	[1]	KIT-SEAL (COUNTERBALANCE VALVE)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30780028

317-3885: BUCKET AS-SIDE DUMP

317-3885 BUCKET AS-SIDE DUMP -PIN-ON
PART OF 383-2234 BUCKET GP-SIDE DUMP

i04672770 SEBP3078

3173885 BUCKET AS-SIDE DUMP Parts scheme

For full view, you need register

Parts for your BUCKET: