WORK TOOLS
FORK GPHYDRAULIC SYSTEM
CYLINDER GPVALVE GP-BANK
WORK TOOLS
FORK GP
#SEBP30800050
189-5533: TINE GP
For full view, you need register
#SEBP30800051
189-5534: TINE GP
For full view, you need register
#SEBP30800052
372-1490: TINE GP
372-1490 TINE GP
1829-MM (72-IN)
1829-MM (72-IN)
For full view, you need register
Parts for your FORK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-1491 | [2] | TINE AS (72-IN) |
#SEBP30800053
284-7718: CYLINDER GP-FORK
284-7718 CYLINDER GP-FORK
63.5-MM (2.5-IN) BORE X 711-MM (28-IN) STROKE
PART OF 454-5829 CARRIAGE GP-FORK
63.5-MM (2.5-IN) BORE X 711-MM (28-IN) STROKE
PART OF 454-5829 CARRIAGE GP-FORK
For full view, you need register
Parts for your FORK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 347-6228 | [1] | BARREL AS | |
| 2. | 347-6229 | [1] | SHAFT AS | |
| 3. | 347-6230 | [1] | PISTON | |
| 4. | 2K-0337 | [1] | LOCKNUT (3/4-16-THD) | |
| 5. | 347-6231 | [1] | CLEVIS | |
| 6. | 4D-1736 | [1] | RING-RETAINING | |
| 7. | 347-6232 | [1] | HEAD | |
| 8. | 1D-4539 | [1] | BOLT (5/16-18X2.5-IN) | |
| 9. | 3B-4505 | [1] | LOCKWASHER (5/16) | |
| 10. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 347-6233 | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES DUST SEAL, O-RING SEALS & BACKUP RINGS) | ||||
#SEBP30800054
522-0082: KIT-FASTENER
522-0082 KIT-FASTENER
NON FLOATING TINE
FOR USE WITH LOG AND LUMBER FORKS 435-4634, 435-4684, 435-4686, 379-2109, 379-2199, AND 379-2321
NON FLOATING TINE
FOR USE WITH LOG AND LUMBER FORKS 435-4634, 435-4684, 435-4686, 379-2109, 379-2199, AND 379-2321
For full view, you need register
Parts for your FORK:
CATERPILLAR SISInformation:
WORK TOOLS
FORK GP
Operation and Maintenance Manual
Special Instruction
Installation Procedure for the 380-8289 Fork Group {6405}
Installation Procedure for the 380-8289 Fork Group {6405}
Installation Procedure for the 380-8289 Fork Group {6405}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING FORK TINES ON CERTAIN FORK GROUPS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING FORK TINES ON CERTAIN FORK GROUPS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING FORK TINES ON CERTAIN FORK GROUPS
Technical Information Bulletin
Tine Assembly in the Tine Group May Fail on Certain Pallet Forks {6405}
Tine Assembly in the Tine Group May Fail on Certain Pallet Forks {6405}
Tine Assembly in the Tine Group May Fail on Certain Pallet Forks {6405}
Service Magazine
Improved Tine Assembly Is Now Used On Certain Pallet Forks {6136}
Improved Tine Assembly Is Now Used On Certain Pallet Forks {6136}
Improved Tine Assembly Is Now Used On Certain Pallet Forks {6136}
