HYDRAULIC SYSTEM
VALVE GP-SOLENOIDVALVE GP-CONTROL
IMPLEMENTS
BLOCK GPBRACE GP
BULLDOZER GP
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
#SEBP30860570
3E-8575: VALVE GP-SOLENOID
3E-8575 VALVE GP-SOLENOID
S/N AKT1-UP
24-VOLT
PART OF 188-6140 VALVE & MTG GP-CONTROL
AN ATTACHMENT
S/N AKT1-UP
24-VOLT
PART OF 188-6140 VALVE & MTG GP-CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-3382 | [1] | CARTRIDGE AS | |
| 2. | 160-5843 | [1] | WASHER (16.8X38.1X0.5-MM THK) | |
| 3. | 157-2284 | [1] | LOCKNUT-SPECIAL (5/8-18-THD) | |
| 4. | 160-5844 | [1] | WASHER-SPRING (16.3X31.5X1.85-MM THK) | |
| 5. | 3E-8581 | [1] | COIL AS (24-VOLT) | |
| 6. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 8. | 1S-9593 | [2] | STRAP-CABLE | |
| 9. | 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 126-5948 | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES SEAL-O-RINGS & RING-BACKUPS) | ||||
#SEBP30860571
3E-9205: VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
S/N AKT1-UP
24-VOLT
PART OF 151-0241, 225-2321 VALVE GP-TILT CONTROL
AN ATTACHMENT
S/N AKT1-UP
24-VOLT
PART OF 151-0241, 225-2321 VALVE GP-TILT CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9244 C | [1] | CARTRIDGE AS | |
| 2. | 3E-8581 C | [1] | COIL AS (24-VOLT) | |
| 3. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 1S-9593 | [2] | STRAP-CABLE | |
| 5. | 157-2284 | [1] | LOCKNUT-SPECIAL (5/8-18-THD) | |
| 6. | 160-5843 | [1] | WASHER (16.8X38.1X0.5-MM THK) | |
| 7. | 160-5844 | [1] | WASHER-SPRING (16.3X31.5X1.85-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 126-5948 C | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES O-RING SEALS & BACKUP RINGS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP30860572
151-0241: VALVE GP-TILT CONTROL
151-0241 VALVE GP-TILT CONTROL -DUAL
S/N AKT1-UP
PART OF 174-9185 CONTROL AR-HYDRAULIC
AN ATTACHMENT
S/N AKT1-UP
PART OF 174-9185 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 2. | 150-7683 | [1] | RETAINER | |
| 3. | 150-7684 | [1] | COVER | |
| 4. | 9S-8001 | [4] | PLUG | |
| 5. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 6. | 095-1609 | [1] | SEAL-O-RING | |
| 7. | 9J-1722 | [1] | RETAINER | |
| 8. | 1P-4576 | [6] | FLANGE-HALF | |
| 9. | 1P-4577 | [2] | FLANGE-HALF | |
| 10. | 3J-1907 | [3] | SEAL-O-RING | |
| 11. | 4J-0522 | [1] | SEAL-O-RING | |
| 12. | 4J-7533 | [4] | SEAL-O-RING | |
| 13. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 14. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| 15. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(DUAL TILT) | |
| 16. | 8J-8621 | [2] | SPRING | |
| 17. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 9J-1716 | [1] | COVER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30860573
225-2321: VALVE GP-TILT CONTROL
225-2321 VALVE GP-TILT CONTROL -DUAL
S/N AKT312-UP
PART OF 174-9185 CONTROL AR-HYDRAULIC
AN ATTACHMENT
S/N AKT312-UP
PART OF 174-9185 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(DUAL TILT) | |
| 4. | 8J-8621 | [2] | SPRING | |
| 5. | 9J-1722 | [1] | RETAINER | |
| 7. | 223-4443 | [2] | COVER | |
| 8. | 223-4445 | [1] | RETAINER | |
| 10. | 1P-4576 | [6] | FLANGE-HALF | |
| 11. | 1P-4577 | [2] | FLANGE-HALF | |
| 12. | 3V-2431 | [4] | WASHER (10.2X16X2-MM THK) | |
| 13. | 4J-0522 | [2] | SEAL-O-RING | |
| 14. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 15. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| 16. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 173-3993 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8001 | [1] | PLUG | ||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 18. | 162-0177 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30860574
180-2398: BLOCK GP-PUSH
180-2398 BLOCK GP-PUSH -FIELD CONVERSION
S/N AKT1-UP
FOR USE WITH SINGLE SHANK RIPPER
AN ATTACHMENT
S/N AKT1-UP
FOR USE WITH SINGLE SHANK RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY) | ||||
#SEBP30860575
185-1713: BLOCK GP-PUSH
For full view, you need register
#SEBP30860576
186-3302: BLOCK GP-PUSH
186-3302 BLOCK GP-PUSH
S/N AKT1-UP
WITHOUT BUSHINGS
FOR USE WITH @@@@@180-2404@@@@@
AN ATTACHMENT
S/N AKT1-UP
WITHOUT BUSHINGS
FOR USE WITH @@@@@180-2404@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP30860577
7T-7577: BRACE GP-BULLDOZER
7T-7577 BRACE GP-BULLDOZER
S/N BHA1-UP; BHF1-UP; BHJ1-UP; BHP1-UP
PART OF 171-6652 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N BHA1-UP; BHF1-UP; BHJ1-UP; BHP1-UP
PART OF 171-6652 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-7578 | [1] | BRACE AS | |
| 1A. | 1U-2532 | [2] | BAR | |
| 1B. | 1U-3658 | [1] | HANDLE | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 117-3006 | [1] | BEARING | |
| 4. | 5L-4756 | [1] | RING-RETAINING | |
| 5. | 9B-1948 | [1] | SPACER (1.031X1.625X1-IN THK) | |
| 6. | 7X-0403 | [1] | BOLT (1-8X2.25-IN) | |
| 7. | 9J-6662 | [1] | PIN | |
| 8. | 9J-2365 | [1] | RETAINER | |
| 9. | 7X-0379 | [2] | BOLT (7/8-9X1.5-IN) | |
| 10. | 7T-7586 | [1] | LINK AS |
#SEBP30860578
171-6672: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4T-8183 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 199-5514 Y | [1] | CYLINDER & VALVE GP-LIFT (LH) | ||
| 199-5513 Y | [1] | CYLINDER & VALVE GP-LIFT (RH) | ||
| 114-6006 Y | [1] | LIGHTING GP-FRONT | ||
| 171-6655 Y | [1] | LINES GP-TILT CYLINDER | ||
| 9J-6006 Y | [1] | MOUNTING GP-CYLINDER | ||
| 171-6652 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (UNDER RH CYLINDER DEFLECTOR) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30860579
171-6674: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D10R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-2173 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 199-5513 Y | [1] | CYLINDER & VALVE GP-LIFT (RH) | ||
| 199-5514 Y | [1] | CYLINDER & VALVE GP-LIFT (LH) | ||
| 114-6006 Y | [1] | LIGHTING GP-FRONT | ||
| 171-6655 Y | [1] | LINES GP-TILT CYLINDER | ||
| 9J-6006 Y | [1] | MOUNTING GP-CYLINDER | ||
| 171-6652 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 9J-6073 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (UNDER RH CYLINDER DEFLECTOR) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
