AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0922 CRANKSHAFT GP S/N BDT3998-UP 3412E INDUSTRIAL ENGINE


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

INDUSTRIAL ENGINE 3412E INDUSTRIAL ENGINE BDT
 3412E Industrial Engine BDT00001-UP SEBP3091 3412E BDT   (2000)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
243-6718 KIT-CRANKSHAFT BEARING
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
 

#SEBP30910050
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N BDT3998-UP
i02302821 SEBP3091
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 384-9906 CY [1] CRANKSHAFT AS  
2. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARING & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910051
 

117-9512: CYLINDER BLOCK AS

117-9512 CYLINDER BLOCK AS
S/N BDT1-756
FOR MODELS E429 AND E474 ONLY USE 12-168-4538 JET AS-PISTON COOLING
PART OF 133-4281 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@126-1373@@@@@, 12-111-8606 BOLT, 12- 7W-4990 JET AS-PISTON COOLING
i00089892 SEBP3091
1179512 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-2220 [12] SEAL-LINER  
2. 142-7072 [12] SEAL-LINER  
3. 142-6217 [12] SEAL-O-RING  
4. 197-9322 [12] LINER-CYLINDER BLOCK  
5. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
6. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
7. 485-1966 [7] CAP-CRANKSHAFT  
8. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
9. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
10. 4N-0685 [5] BUSHING (1-IN WIDE)  
   
  4W-4588 AFJT SLEEVE-LIFTER BORE  
  4W-6061 AFLT SLEEVE  
  2W-3815 AFJT INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFJT INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFJT INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFJT INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFJT INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFJT INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFJT INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFJT INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFJT INSERT-LINER SEAT (0.872-MM THK)  
  101-0524 AFJT INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 AFJT INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 AFJT INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  T   QTY TO BE DETERMINED BY USER
 

#SEBP30910052
 

126-1372: CYLINDER BLOCK AS

126-1372 CYLINDER BLOCK AS
S/N BDT499-UP
PART OF 126-1375 CYLINDER BLOCK AS, 126-1373 CYLINDER BLOCK GP
i00089937 SEBP3091
1261372 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 485-1966 [7] CAP-CRANKSHAFT  
3. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
4. 4N-0685 [5] BUSHING (1-IN WIDE)  
5. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
6. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
   
  4W-4588 AFJN SLEEVE-LIFTER BORE  
  4W-6061 AFLN SLEEVE  
  2W-3815 AFJN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFJN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFJN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFJN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFJN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFJN INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFJN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFJN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFJN INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  N   QUANTITY TO BE DETERMINED BY USER
 

#SEBP30910053
 

126-1375: CYLINDER BLOCK AS

126-1375 CYLINDER BLOCK AS
S/N BDT499-UP
PART OF 109-9010 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@126-1373@@@@@, 12- 7W-4990 TUBE AS-OIL JET, 12-111-8606 BOLT-OIL JET
i00513529 SEBP3091
1261375 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1372 Y [1] CYLINDER BLOCK AS  
2. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
3. 197-9322 [12] LINER-CYLINDER BLOCK  
4. 110-2220 [12] SEAL-LINER  
5. 142-7072 [12] SEAL-LINER  
6. 142-6217 [12] SEAL-O-RING  
  4W-4588 ABFJ SLEEVE-LIFTER BORE  
  4W-6061 ABFL SLEEVE  
  2W-3815 ABFJ INSERT-LINER SEAT (1.605-MM THK)  
  5N-0093 ABFJ INSERT-LINER SEAT (2.71-MM THK)  
  9Y-3368 ABFJ INSERT-LINER SEAT (0.822-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910054
 

109-9010: CYLINDER BLOCK GP

109-9010 CYLINDER BLOCK GP
i00089858 SEBP3091
1099010 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 126-1375 Y [1] CYLINDER BLOCK AS  
5. 8T-6757 [5] PLUG-PIPE  
6. 225-3101 [2] GASKET-PLATE  
7. 225-3100 [2] PLATE-SPACER  
8. 7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
10. 101-8917 [26] STUD-TAPERLOCK (3/8-16X4.5-IN)  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
14. 5P-8356 [4] SEAL-O-RING  
15. 3S-6605 [2] PLUG-CUP  
16. 7C-7407 [1] STUD  
   
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910055
 

126-1373: CYLINDER BLOCK GP

126-1373 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@117-9512@@@@@, @@@@@126-1375@@@@@
i00089938 SEBP3091
1261373 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
2. 9S-4190 [8] PLUG-O-RING (7/8-14-THD)  
3. 126-1372 Y [1] CYLINDER BLOCK AS  
4. 114-4427 [8] SEAL-O-RING  
5. 3B-0645 [1] PLUG-CUP  
6. 3S-6605 [2] PLUG-CUP  
7. 7W-6534 [4] PLUG-PIPE  
8. 8T-6757 [6] PLUG-PIPE  
9. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
   
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)(STANDARD)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)(0.5-MM US)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)(0.5-MM OS)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)(STANDARD)  
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)(0.05-MM US)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)(0.05-MM OS)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)(STANDARD)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)(0.05-MM US)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)(0.05-MM OS)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)(STANDARD)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)(0.05-MM US)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)(0.05-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910056
 

133-4281: CYLINDER BLOCK GP

133-4281 CYLINDER BLOCK GP
S/N BDT1-758
i00502705 SEBP3091
1334281 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1650 [4] DOWEL  
2. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
3. 101-8917 [26] STUD-TAPERLOCK (3/8-16X4.5-IN)  
4. 117-9512 Y [1] CYLINDER BLOCK AS  
5. 7C-7407 [1] STUD  
6. 6N-9135 [2] GASKET-PLATE  
7. 6I-4611 [2] PLATE-SPACER  
8. 5P-8356 [4] SEAL-O-RING  
9. 8T-6757 [5] PLUG-PIPE  
10. 3S-6605 [2] PLUG-CUP  
11. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
12. 3B-0645 [1] PLUG-CUP  
13. 7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
14. 4N-0683 [4] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910057
 

143-0046: CYLINDER HEAD AS

143-0046 CYLINDER HEAD AS
PART OF 143-0047, 192-1322 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@
i00562988 SEBP3091
1430046 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [10] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [12] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP30910058
 

143-0047: CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
i00566897 SEBP3091
1430047 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910059
 

192-1322: CYLINDER HEAD AS

192-1322 CYLINDER HEAD AS
PART OF 108-1887 CYLINDER HEAD GP
i01438311 SEBP3091
1921322 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
3. 102-7494 [2] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
A New Type of Main Bearing is Now Used {1203}
2007/09/17
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Main Bearing Journal
3408E and 3412E Industrial Engines
Crankshaft
3408E and 3412E Industrial Engines
Connecting Rod Bearing Journal
3408E and 3412E Industrial Engines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3408E and 3412E Industrial Engines
Main Bearings - Inspect
3408E and 3412E Industrial Engines
Disassembly and Assembly
Crankshaft Vibration Damper
3408E & 3412E INDUSTRIAL ENGINES
Crankshaft Front Seal & Wear Sleeve
3408E & 3412E INDUSTRIAL ENGINES
Crankshaft Rear Seal & Wear Sleeve
3408E & 3412E INDUSTRIAL ENGINES
Crankshaft
3408E & 3412E INDUSTRIAL ENGINES
Crankshaft Main Bearings
3408E & 3412E INDUSTRIAL ENGINES
Bearing Clearances
3408E & 3412E INDUSTRIAL ENGINES
Service Magazine
Remanufactured 3412 Crankshafts {1202}
2000/01/24
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3412E :

CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
COVER-VALVE MECHANISM
114-8684 COVER-VALVE MECHANISM
COVER GP-VALVE MECHANISM
246-4626 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
246-4624 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
203-0133 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
195-9755 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
128-5723 COVER GP-VALVE MECHANISM
CYLINDER BLOCK AS
117-9512 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK GP
109-9010 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
CYLINDER BLOCK GP
133-4281 CYLINDER BLOCK GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS

Truck sale:

Caterpillar G3412EP, Construction
110,000 
Caterpillar G3412EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
Call 
1983 CAT 3412E

Empire Machinery
Eloy, Arizona
2006 CAT 3412E
USD $19,500 
2006 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.