AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

108-1552 CYLINDER HEAD GP S/N BDT499-3916; BDT4230-UP 3412E INDUSTRIAL ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

INDUSTRIAL ENGINE 3412E INDUSTRIAL ENGINE BDT
 3412E Industrial Engine BDT00001-UP SEBP3091 3412E BDT   (2000)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
192-1322 CYLINDER HEAD AS
CYLINDER HEAD GP
108-1552 CYLINDER HEAD GP
CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
250-3410 CYLINDER HEAD GP
 

#SEBP30910060
 

108-1552: CYLINDER HEAD GP

108-1552 CYLINDER HEAD GP
S/N BDT499-3916; BDT4230-UP
i00089846 SEBP3091
1081552 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 CY [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [2] PLATE  
15. 7W-3447 [20] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 2K-2813 [40] BOLT (3/4-16X10-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
29. 1U-8846 B SEALANT-GASKET  
30. 033-6027 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910061
 

108-1887: CYLINDER HEAD GP

108-1887 CYLINDER HEAD GP
PART OF 108-1552, 129-1674, 250-3410, 250-9978 CYLINDER HEAD GP
i00565636 SEBP3091
1081887 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-1322 YC [1] CYLINDER HEAD AS  
2. 122-0322 [12] VALVE-INLET  
4. 2A-4429 [48] LOCK-RETAINER  
5. 137-6500 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  137-6501 [1] SHIELD-OIL  
  6N-7154 [1] ROTOCOIL AS  
6. 4N-5906 [24] SPRING-VALVE  
7. 122-0321 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910062
 

129-1674: CYLINDER HEAD GP

129-1674 CYLINDER HEAD GP
i00522898 SEBP3091
1291674 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 CY [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 214-7568 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
30. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910063
 

250-3410: CYLINDER HEAD GP

250-3410 CYLINDER HEAD GP
i02084162 SEBP3091
2503410 CYLINDER HEAD GP Parts scheme 2503410 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 Y [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
30. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910064
 

250-9978: CYLINDER HEAD GP

250-9978 CYLINDER HEAD GP
S/N BDT1620-UP
i02084501 SEBP3091
2509978 CYLINDER HEAD GP Parts scheme 2509978 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 Y [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [2] PLATE  
15. 7W-3447 [20] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
29. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910065
 

103-8845: DAMPER & PULLEY GP

103-8845 DAMPER & PULLEY GP
FOR USE WITH DITTA ENGINES
AN ATTACHMENT
i00471171 SEBP3091
1038845 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [2] PULLEY (1-GROOVE)(1 GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30910066
 

174-4346: DAMPER & PULLEY GP

174-4346 DAMPER & PULLEY GP
SINGLE GROOVE ALTERNATOR PULLEY AND DAMPER WITH 81-MM LENGTH STUDS, DOES NOT INCLUDE FAN DRIVE PULLEY
AN ATTACHMENT
i01137409 SEBP3091
1744346 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8426 [12] STUD-TAPERLOCK (1/2-13X3.19-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30910067
 

199-7873: DAMPER & PULLEY GP

199-7873 DAMPER & PULLEY GP
SINGLE GROOVE PULLEY AND DAMPER WITH 91MM LENGTH STUDS, DOES NOT INCLUDE FAN DRIVE PULLEY
AN ATTACHMENT
i01510802 SEBP3091
1997873 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30910068
 

5N-5322: DAMPER & PULLEY GP

5N-5322 DAMPER & PULLEY GP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
i00385434 SEBP3091
5N5322 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4399 [1] PULLEY (2-GROOVE)  
2. 167-8130 [1] DAMPER AS  
3. 6N-4400 [1] ADAPTER  
4. 0S-1587 [12] BOLT (1/2-13X1.75-IN)  
5. 1B-7538 [9] BOLT (5/8-18X5.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP30910069
 

8N-5572: DAMPER & PULLEY GP

8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
ALSO AN ATTACHMENT
i00431413 SEBP3091
8N5572 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
7. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
3408E and 3412E Industrial Engines
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Industrial Engines
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Cylinder Head Valves
3408E and 3412E Industrial Engines
Cylinder Head
3408E and 3412E Industrial Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Industrial Engines
Cylinder Head - Inspect
3408E and 3412E Industrial Engines
Disassembly and Assembly
Cylinder Heads
3408E & 3412E INDUSTRIAL ENGINES
Inlet & Exhaust Valves
3408E & 3412E INDUSTRIAL ENGINES
Valve Guides
3408E & 3412E INDUSTRIAL ENGINES
Valve Seat Inserts
3408E & 3412E INDUSTRIAL ENGINES

Caterpillar Parts SIS Catalog 3412E :

CYLINDER HEAD AS
192-1322 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER BLOCK GP
133-4281 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
CYLINDER BLOCK GP
109-9010 CYLINDER BLOCK GP
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
250-3410 CYLINDER HEAD GP
CYLINDER HEAD GP
250-9978 CYLINDER HEAD GP
DAMPER & PULLEY GP
103-8845 DAMPER & PULLEY GP
DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
DAMPER & PULLEY GP
199-7873 DAMPER & PULLEY GP
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP

Truck sale:

Caterpillar G3412EP, Construction
110,000 
Caterpillar G3412EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
Call 
1983 CAT 3412E

Empire Machinery
Eloy, Arizona
2006 CAT 3412E
USD $19,500 
2006 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.