AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-5105 STARTING MOTOR GP-AIR PART OF 143-7606 STARTING MOTOR GP-AIR FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@ AN ATTACHMENT 3412E


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE 3412E INDUSTRIAL ENGINE BDT
 3412E Industrial Engine BDT00001-UP SEBP3091 3412E BDT   (2000)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
STARTING MOTOR GP-AIR
143-7606 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5105 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
 

#SEBP30910530
 

4W-5105: STARTING MOTOR GP-AIR

4W-5105 STARTING MOTOR GP-AIR
PART OF 143-7606 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
i00379549 SEBP3091
4W5105 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3937 M [1] BOLT (M5X0.8X20-MM)  
  5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
2. 5N-8363 [1] COVER AS  
3. 4D-3118 [3] PLUG-PIPE  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
  1L-8497 [1] RING-SNAP (SMALL)  
  6J-7855 [1] RING-RETAINING (LARGE)  
6. 5N-8375 [1] CUP-SPRING  
  6V-3935 [1] RING-RETAINING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
  3B-4505 [8] LOCKWASHER  
13. 3J-7719 [1] RING-RETAINING (INNER)(INNER)  
  6V-3971 [1] RING-RETAINING (OUTER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 6V-3959 [5] LOCKWASHER  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
  5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
  5N-8374 [1] SLEEVE-SPRING  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RINGS, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
  039-4317 [2] WASHER-SPRING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 5N-8364 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#SEBP30910531
 

4W-5107: STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5105@@@@@
i00109293 SEBP3091
4W5107 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
2. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3. 3B-4505 [8] LOCKWASHER  
4. 5N-8363 [1] COVER AS  
  4D-3118 [3] PLUG-PIPE  
5. 5N-8364 [1] HOUSING-MOTOR  
6. 5N-8384 [1] SHAFT-DRIVE  
7. 5N-8387 [1] CASE-GEAR  
8. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
9. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
10. 6V-3959 [5] LOCKWASHER  
11. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 1L-8497 [1] RING-SNAP (SMALL)  
14. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
15. 3J-7719 [1] RING-RETAINING (INNER)  
16. 5N-8365 [1] PLATE-FRONT END  
17. 5N-8367 [1] PLATE-REAR END  
18. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
19. 5N-8372 [1] SPRING-RETURN  
20. 5N-8373 [1] PISTON  
21. 5N-8374 [1] SLEEVE-SPRING  
22. 5N-8375 [1] CUP-SPRING  
23. 5N-8377 [1] BEARING-DRIVE SHAFT  
24. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
25. 5N-8379 [1] SEAT-SPRING  
26. 5N-8380 [1] SPRING-PINION  
27. 5N-8381 [1] SPRING-CLUTCH  
28. 5N-8383 [1] CYLINDER  
29. 5N-8388 [1] ROTOR  
30. 5N-8424 [1] BULKHEAD  
31. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
32. 5N-9574 [1] JAW AS-CLUTCH  
33. 5P-9514 [1] BALL BEARING  
34. 6J-7855 [1] RING-RETAINING (LARGE)  
35. 6V-1394 [1] BALL BEARING  
36. 6V-3916 [1] BALL BEARING  
37. 6V-3935 [1] RING-RETAINING  
38. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
39. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
40. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
41. 6V-3971 [1] RING-RETAINING (OUTER)  
42. 7F-8671 [1] BALL BEARING  
43. 8B-7624 [1] BALL BEARING  
44. 039-4317 [2] WASHER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#SEBP30910532
 

7C-3372: STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5105@@@@@, @@@@@ 4W-5107@@@@@
i00091625 SEBP3091
7C3372 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
2. 5N-8363 [1] COVER AS  
2A. 4D-3118 [3] PLUG-PIPE  
3. 039-4317 [2] WASHER-SPRING  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
6. 5N-8375 [1] CUP-SPRING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 3J-7719 [1] RING-RETAINING (INNER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 111-4399 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
37. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
38. 1L-8497 [1] RING-SNAP  
39. 6J-7855 [1] RING-RETAINING  
40. 6V-3935 [1] RING-RETAINING  
41. 3B-4505 [8] LOCKWASHER  
42. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
43. 6V-3971 [1] RING-RETAINING (OUTER)  
44. 5N-8374 [1] SLEEVE-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

#SEBP30910533
 

106-8554: STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC
S/N BDT1-660
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
i00090223 SEBP3091
1068554 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-1434 [2] LOCKWASHER  
2. 6V-8188 [4] NUT (1/2-13-THD)  
3. 8T-8566 [1] TERMINAL AS  
4. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
5. 3T-3422 [1] WIRE AS  
6. 7T-3278 [1] HOLDER AS-BRUSH  
7. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
8. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 7T-3276 [1] ARMATURE AS (24-VOLT)  
10. 4M-1831 [1] PLUG-LEVER HOUSING  
11. 7L-2894 [1] GASKET  
12. 250-8279 [1] KIT-SOLENOID (24-VOLT)(STARTING MOTOR)  
    (INCLUDES BOLT, COVER, CONNECTORS, NUTS & SOLENOID AS)
13. 036-9821 [1] WASHER  
14. 306-3997 [1] BOOT  
15. 4M-1828 [1] RETAINER-SPRING  
16. 9M-7609 [1] SPRING (SHIFT LEVER)  
17. 4M-1827 [1] RETAINER-SPRING  
18. 2H-3429 [1] RING-RETAINING  
19. 4B-2049 [3] NUT (10-32-THD)  
20. 6N-3826 [1] DRIVE AS-MOTOR  
21. 9X-4824 [1] COVER-STARTING MOTOR  
22. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
23. 7T-3277 [1] COIL AS-FIELD  
24. 7T-3454 [1] INSULATOR  
25. 8H-1141 [4] SHOE-POLE  
26. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
27. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
28. 8T-8569 [1] INSULATOR-TERMINAL  
29. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
30. 3E-7775 [1] HOUSING AS  
31. 0S-1597 [5] BOLT (1/4-28X1-IN)  
32. 7T-3974 [1] HOUSING AS-DRIVE  
33. 3T-3434 [6] PLUG  
34. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
35. 7T-3270 [1] PLUNGER AS  
36. 7T-3279 [1] HOUSING AS  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SPRINGS, BRUSH ASSEMBLIES & SCREWS)
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES NUT, SPACER, GASKET, BUSHINGS, WICKS, CUPS, SEALS & SCREW ASSEMBLIES)
  7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES RETAINER, LEVER ASSEMBLIES, NUT & SEALS)
  8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES BUSHING & INSULATORS)
 

#SEBP30910534
 

177-1655: STARTING MOTOR GP-ELECTRIC

177-1655 STARTING MOTOR GP-ELECTRIC
DUAL, 24-VOLT
FOR USE WITH SINGLE TURBO ENGINES
AN ATTACHMENT
i01615965 SEBP3091
1771655 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [2] GASKET  
2. 207-1549 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
3. 207-1564 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 176-2543 [6] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30910535
 

207-1549: STARTING MOTOR GP-ELECTRIC

207-1549 STARTING MOTOR GP-ELECTRIC
24-VOLT. 42MT SEMI-SOLID LINK
PART OF 177-1655, 6N-4515 STARTING MOTOR GP-ELECTRIC
Type 1
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i01615155 SEBP3091
2071549 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 036-9823 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 193-8570 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. Z [1] HOUSING  
30. JZ [4] SPRING  
31. JZ [4] BRUSH  
32. JZ [4] SCREW  
33. JPZ [6] SCREW AS  
34. JPZ [1] SEAL-0-RING  
35. LZ [3] INSULATOR  
36. NZ [1] LEVER AS  
37. NPZ [1] NUT  
38. NPZ [1] SEAL-O-RING  
39. PZ [1] SEAL-O-RING  
40. NZ [1] RETAINER  
41. PZ [1] GASKET  
42. PZ [1] BUSHING  
43. PZ [2] PLUG-CUP  
44. PZ [1] PLUG-CUP  
45. PZ [1] PLUG  
46. PZ [1] PLUG  
47. PZ [1] PLUG  
48. PZ [1] BUSHING  
49. PZ [1] WASHER  
50. NZ [1] SEAL-O-RING  
51. NZ [1] SEAL-O-RING  
52. PZ [1] RETAINER  
53. PZ [1] SPACER  
54. PZ [1] BUSHING  
55. LZ [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 J [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
  7T-3267 P [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
  7T-3268 N [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, GASKET, NUT, & RETAINER)
  8T-9884 L [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  N   KITS MARKED N INCLUDES PARTS MARKED N
  P   KITS MARKED P INCLUDES PARTS MARKED P
  Z   NOT SERVICED SEPARATELY
 

#SEBP30910536
 

207-1549: STARTING MOTOR GP-ELECTRIC

207-1549 STARTING MOTOR GP-ELECTRIC
24-VOLT. 42MT SEMI-SOLID LINK
PART OF 177-1655, 6N-4515 STARTING MOTOR GP-ELECTRIC
Type 2
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i04623492 SEBP3091
2071549 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. Z [1] HOUSING  
30. JZ [4] SPRING  
31. JZ [4] BRUSH  
32. JZ [4] SCREW  
33. JPZ [6] SCREW AS  
34. JPZ [1] SEAL-0-RING  
35. LZ [3] INSULATOR  
36. NZ [1] LEVER AS  
37. NPZ [1] NUT  
38. NPZ [1] SEAL-O-RING  
39. PZ [1] SEAL-O-RING  
40. NZ [1] RETAINER  
41. PZ [1] GASKET  
42. PZ [1] BUSHING  
43. PZ [2] PLUG-CUP  
44. PZ [1] PLUG-CUP  
45. PZ [1] PLUG  
46. PZ [1] PLUG  
47. PZ [1] PLUG  
48. PZ [1] BUSHING  
49. PZ [1] WASHER  
50. NZ [1] SEAL-O-RING  
51. NZ [1] SEAL-O-RING  
52. PZ [1] RETAINER  
53. PZ [1] SPACER  
54. PZ [1] BUSHING  
55. LZ [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 J [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
  7T-3267 P [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
  7T-3268 N [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, GASKET, NUT, & RETAINER)
  8T-9884 L [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  N   KITS MARKED N INCLUDES PARTS MARKED N
  P   KITS MARKED P INCLUDES PARTS MARKED P
  Z   NOT SERVICED SEPARATELY
 

#SEBP30910537
 

207-1556: STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
24-VOLT
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@207-1564@@@@@, @@@@@207-1549@@@@@, @@@@@ 6V-5539@@@@@, @@@@@ 6V-5582@@@@@
i01592733 SEBP3091
2071556 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUTS, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)
 

#SEBP30910538
 

207-1564: STARTING MOTOR GP-ELECTRIC

207-1564 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 177-1655, 4N-1062, 6N-4515 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i01573992 SEBP3091
2071564 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS (STARTING MOTOR)  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
  3E-7853 [1] TERMINAL  
  5S-7349 [1] BOLT (1/4-20X0.5-IN)  
  278-0592 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES TERMINAL INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 7T-3973 [1] HOUSING AS-LEVER  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (KIT INCLUDES NUTS, CONNECTORS, AND BOLT)
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, SCREWS & SCREW ASSEMBLIES)
31. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES NUT, GASKET, RETAINER, SEALS & LEVER ASSEMBLIES)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUP, SEALS, GASKET, SCREWS, WASHERS & NUT)
 

#SEBP30910539
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 358-4855, 4N-1061 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@, @@@@@207-1556@@@@@
AN ATTACHMENT
i01972316 SEBP3091
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
65. 125-6536 [1] TERMINAL AS  
 

Information:

Engine News
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
Operation and Maintenance Manual
Starting Motor - Inspect
3408E and 3412E Industrial Engines
Starting the Engine
3408E and 3412E Industrial Engines
Cold Weather Starting
3408E and 3412E Industrial Engines
Air Starting
3408E and 3412E Industrial Engines
Special Instruction
Solenoid (Starting Motor) − Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Air Starting Motor Pressure Regulating Valve
3408E and 3412E Industrial Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Air Starting Motor
3408E and 3412E Industrial Engines
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
Electric Starting System - Test
3408E and 3412E Industrial Engines
Pinion Clearance - Adjust
3408E and 3412E Industrial Engines
Pinion Clearance - Adjust
3408E and 3412E Industrial Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Electric Starting Motor
3408E & 3412E INDUSTRIAL ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Caterpillar Parts SIS Catalog 3412E :

STARTING MOTOR GP-AIR
143-7606 STARTING MOTOR GP-AIR
8N-0620 STARTING AID GP-ETHER
230-3242 STARTING AID GP-ETHER
143-8872 STARTING AID GP-ETHER
SENSOR GP-TEMPERATURE
147-9752 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
106-0735 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
7W-3355 SENSOR GP-SPEED
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
177-1655 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1564 STARTING MOTOR GP-ELECTRIC

Truck sale:

Caterpillar G3412EP, Construction
110,000 
Caterpillar G3412EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
Call 
1983 CAT 3412E

Empire Machinery
Eloy, Arizona
2006 CAT 3412E
USD $19,500 
2006 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.