AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

124-6818 GEAR GP-FRONT S/N BET1-1176 PART OF 170-1753 ENGINE AR-CORE 980G II WHEEL LOADER


BASIC ENGINE
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
HOUSING GP-FRONT

WHEEL LOADER 980G II WHEEL LOADER AWH
 980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine SEBP3095 980G II AWH   (1999)

BASIC ENGINE

GEAR GP
GEAR GP-FRONT
124-6818 GEAR GP-FRONT
GEAR GP-FRONT
124-6818 GEAR GP-FRONT
GEAR GP-FRONT
124-6818 GEAR GP-FRONT
HOUSING GP-FRONT
178-7598 HOUSING GP-FRONT
 

#SEBP30950060
 

124-6818: GEAR GP-FRONT

124-6818 GEAR GP-FRONT
S/N BET1-1176
PART OF 170-1753 ENGINE AR-CORE
i00518787 SEBP3095
1246818 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 2J-3118 [5] BOLT-LOCKING (3/8-16X1.25-IN)  
3. 5P-4142 [2] BOLT-LOCKING (3/8-16X1.5-IN)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
6. 126-1756 [10] BOLT-LOCKING (5/16-18X0.875-IN)  
7. 112-9217 [1] PLATE-THRUST  
8. 130-4701 [1] GEAR AS (56-TEETH)  
  130-4698 [1] BUSHING  
9. 151-5966 [1] SHAFT AS-STUB  
  6I-3623 [1] DOWEL  
10. 6I-3624 [2] PLATE-THRUST  
11. 6I-3625 [1] GEAR AS (71-TEETH)  
  101-8468 [1] BUSHING  
12. 128-2659 [1] GEAR AS (105, 63-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
  131-7123 [1] BUSHING  
13. 6I-3632 [1] SHAFT-STUB (CLUSTER)  
14. 158-3416 [1] SHAFT-STUB  
15. 031-3185 [6] BOLT-12 POINT HEAD (5/8-11X3-IN)  
16. 7E-5661 [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
17. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
18. 9X-6458 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 117-8801 [1] SEAL-O-RING  
20. 5E-8771 [1] SEAL-O-RING  
21. 117-8557 [1] PLATE-SEAL  
22. 128-8853 [1] ADAPTER AS  
  6V-3677 [1] DOWEL  
23. 102-5861 [1] PLATE-THRUST  
24. 107-0583 [3] BOLT-LOCKING (1/4-20X0.87-IN)  
25. 136-8884 [1] GEAR GP-CAM (96-TEETH)  
  9X-8872 [8] BOLT-LOCKING (3/8-16X0.875-IN)  
 

#SEBP30950061
 

124-6818: GEAR GP-FRONT

124-6818 GEAR GP-FRONT
S/N BET1177-UP
PART OF 170-1753, 235-3455 ENGINE AR-CORE
i01606985 SEBP3095
1246818 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 2J-3118 [5] BOLT-LOCKING (3/8-16X1.25-IN)  
3. 5P-4142 [2] BOLT-LOCKING (3/8-16X1.5-IN)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
6. 126-1756 [10] BOLT-LOCKING (5/16-18X0.875-IN)  
7. 112-9217 [1] PLATE-THRUST  
8. 130-4701 [1] GEAR AS (56-TEETH)  
  130-4698 [1] BUSHING  
9. 151-5966 [1] SHAFT AS-STUB  
  6I-3623 [1] DOWEL  
10. 6I-3624 [2] PLATE-THRUST  
11. 6I-3625 [1] GEAR AS (71-TEETH)  
  101-8468 [1] BUSHING  
12. 128-2659 [1] GEAR AS (105, 63-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
  131-7123 [1] BUSHING  
13. 248-3008 [1] SHAFT-STUB (CLUSTER)  
14. 158-3416 [1] SHAFT-STUB  
15. 031-3185 [6] BOLT-12 POINT HEAD (5/8-11X3-IN)  
16. 7E-5661 [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
17. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
18. 9X-6458 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 117-8801 [1] SEAL-O-RING  
20. 5E-8771 [1] SEAL-O-RING  
21. 117-8557 [1] PLATE-SEAL  
22. 128-8853 [1] ADAPTER AS  
  6V-3677 [1] DOWEL  
23. 102-5861 [1] PLATE-THRUST  
24. 107-0583 [3] BOLT-LOCKING (1/4-20X0.87-IN)  
25. 204-9316 CY [1] GEAR GP-CAMSHAFT (96-TEETH)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950062
 

124-6818: GEAR GP-FRONT

124-6818 GEAR GP-FRONT
S/N BET8017-UP
PART OF 235-3455 ENGINE AR-CORE
i05135509 SEBP3095
1246818 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 2J-3118 [5] BOLT-LOCKING (3/8-16X1.25-IN)  
3. 5P-4142 [2] BOLT-LOCKING (3/8-16X1.5-IN)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
6. 126-1756 [10] BOLT-LOCKING (5/16-18X0.875-IN)  
7. 112-9217 [1] PLATE-THRUST  
8. 130-4701 [1] GEAR AS (56-TEETH)  
  130-4698 [1] BUSHING  
9. 151-5966 [1] SHAFT AS-STUB  
  6I-3623 [1] DOWEL  
10. 6I-3624 [2] PLATE-THRUST  
11. 6I-3625 [1] GEAR AS (71-TEETH)  
  101-8468 [1] BUSHING  
12. 128-2659 [1] GEAR AS (105, 63-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
  131-7123 [1] BUSHING  
13. 248-3008 [1] SHAFT-STUB (CLUSTER)  
14. 158-3416 [1] SHAFT-STUB  
15. 031-3185 [6] BOLT-12 POINT HEAD (5/8-11X3-IN)  
16. 7E-5661 [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
17. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
18. 9X-6458 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 117-8801 [1] SEAL-O-RING  
20. 5E-8771 [1] SEAL-O-RING  
21. 117-8557 [1] PLATE-SEAL  
22. 128-8853 [1] ADAPTER AS  
  6V-3677 [1] DOWEL  
23. 102-5861 [1] PLATE-THRUST  
24. 107-0583 [3] BOLT-LOCKING (1/4-20X0.87-IN)  
25. 353-0186 CY [1] GEAR GP-CAMSHAFT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950063
 

160-2612: HOUSING GP-FLYWHEEL

160-2612 HOUSING GP-FLYWHEEL
S/N BET1-13439
SAE.NO.1
PART OF 169-4823, 202-7585, 235-4678, 235-4679 ENGINE AR-COMPLETE
i01131475 SEBP3095
1602612 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [1] COVER  
2. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING)  
3. 5F-0304 [1] PLUG (FLYWHEEL HOUSING)  
4. 9Y-6089 [1] GASKET  
5. 108-4758 [1] HOUSING AS  
  3B-1925 [1] WASHER (0.766X1X0.064-IN THK)  
  9L-9653 [1] PLUG  
  1W-3136 [1] BAFFLE  
6. 155-5619 [1] GASKET  
7. 160-2563 [1] ADAPTER  
8. 165-3929 [10] BOLT (3/8-16X1.5-IN)(MARKED X)  
9. 165-3933 [5] BOLT (3/8-16X2.25-IN)(3/8-16)  
    (LOCATIONS MARKED Y)
10. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
11. 0S-1594 [1] BOLT (3/8-16X1-IN)  
12. 0S-1619 [1] BOLT (3/8-16X3-IN)  
13. 2A-1162 [1] GASKET  
14. 4N-0933 [1] GASKET  
15. 5M-2894 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
    (LOCATIONS MARKED X,Y)
16. 5P-8245 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
    (LOCATIONS MARKED P)
17. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
18. 7K-6058 [9] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
    (LOCATIONS MARKED P)
19. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
20. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950064
 

160-2612: HOUSING GP-FLYWHEEL

160-2612 HOUSING GP-FLYWHEEL
S/N BET13440-UP
SAE.NO.1
PART OF 235-4678, 235-4679 ENGINE AR-COMPLETE
i03542795 SEBP3095
1602612 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [1] COVER  
2. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
3. 5F-0304 [1] PLUG  
4. 9Y-6089 [1] GASKET  
5. 108-4758 [1] HOUSING AS  
  1W-3136 [1] BAFFLE  
6. 155-5619 [1] GASKET  
7. 160-2563 [1] ADAPTER  
8. 165-3929 [10] BOLT (3/8-16X1.5-IN)  
    (LOCATIONS MARKED X)
9. 165-3933 [5] BOLT (3/8-16X2.25-IN)  
    (LOCATIONS MARKED Y)
10. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
11. 0S-1594 [1] BOLT (3/8-16X1-IN)  
12. 0S-1619 [1] BOLT (3/8-16X3-IN)  
13. 2A-1162 [1] GASKET  
14. 234-8937 C [1] SEAL-INTEGRAL  
15. 5M-2894 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
    (LOCATIONS MARKED X,Y)
16. 5P-8245 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
    (LOCATIONS MARKED P)
17. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
18. 7K-6058 [9] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
    (LOCATIONS MARKED P)
19. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
20. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
21. 2A-1912 [1] PLUG  
22. 3B-1925 [1] WASHER (0.766X1X0.064-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950065
 

178-7598: HOUSING GP-FRONT

178-7598 HOUSING GP-FRONT
S/N BET1-UP
SOUND SUPPRESSION
PART OF 169-4823, 202-7585, 235-4678, 235-4679 ENGINE AR-COMPLETE
i01344445 SEBP3095
1787598 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-7340 [1] HOUSING AS-FRONT  
  3E-8044 [1] STUD (1/2-13X2.95-IN)  
2. 188-7513 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
3. 7C-1445 [1] COVER  
4. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 0S-1594 [3] BOLT (3/8-16X1-IN)(MARKED X)  
7. 5M-2894 [19] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 061-9455 [1] SEAL-O-RING  
9. 0S-1588 [13] BOLT (3/8-16X1.25-IN)  
11. 155-3629 [1] GASKET  
12. 166-9144 [1] GASKET  
13. 353-9977 Y [1] PLATE AS-FRONT HOUSING  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 0T-0055 [4] BOLT (3/8-16X4.25-IN)  
16. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
21. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
22. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
23. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
24. 324-6804 [1] COVER AS  
25. 100-3098 [1] COVER AS-PANEL  
28. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
29. 3P-1155 [1] SEAL-O-RING  
30. 132-9770 [1] SPACER AS  
  1W-6448 [2] DOWEL  
31. 5P-4255 [8] BOLT-LOCKING (3/8-16X1-IN)  
32. 7X-4805 [2] SEAL-O-RING  
33. 228-4947 [2] SEAL-O-RING  
34. 189-9266 [1] SENSOR GP-SPEED (PRIMARY, TIMING)  
35. 9X-6458 [19] WASHER-HARD (10.2X22.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950066
 

424-8378: KIT-CYLINDER HEAD GASKET

424-8378 KIT-CYLINDER HEAD GASKET
S/N AWH1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND INSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. KIT IS FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD REPLACEMENT FOR @@@@@325-2720@@@@@
FOR USE WITH @@@@@235-4678@@@@@, @@@@@169-4823@@@@@, SEHS0361
i05700752 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  157-0670 [1] CAP-DUST  
  243-1159 [18] FASTENER AS  
    (EACH INCLUDES)
  149-7378 [1] GROMMET  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  4N-0699 [1] GASKET  
  101-3125 [1] GASKET (AIR INLET MANIFOLD)  
  227-1204 [1] GASKET  
  359-0908 [1] GASKET-CYLINDER HEAD  
  129-9452 [6] GASKET-EXHAUST MANIFOLD  
  1S-6595 [1] GASKET-OIL SUPPLY  
  104-8585 [1] GASKET-REGULATOR  
  4N-1156 [1] GASKET-REGULATOR COVER  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  5P-5678 [3] SEAL  
  142-2329 [1] SEAL  
  272-0390 [1] SEAL  
  3E-6772 [24] SEAL (WATER)  
  6V-0128 [1] SEAL-CONNECTOR  
  126-2702 [1] SEAL-INTEGRAL  
  198-6068 [1] SEAL-INTEGRAL  
  3S-9643 [1] SEAL-LIP TYPE  
  2M-9780 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  5E-8771 [1] SEAL-O-RING  
  5H-7704 [2] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  6V-3251 [1] SEAL-O-RING  
  6V-3831 [1] SEAL-O-RING  
  6V-3917 [2] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  6V-5266 [1] SEAL-O-RING  
  6V-6609 [2] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
  8L-2777 [12] SEAL-O-RING  
  8L-2786 [1] SEAL-O-RING  
  9X-7430 [6] SEAL-O-RING  
  112-3102 [6] SEAL-O-RING  
  109-0093 [1] SEAL-O-RING  
  114-2687 [1] SEAL-O-RING  
  117-8801 [1] SEAL-O-RING  
  166-2904 [12] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [7] SEAL-O-RING  
  228-7091 [1] SEAL-O-RING  
  238-5080 [1] SEAL-O-RING  
  272-2583 [1] SEAL-O-RING  
  242-9537 [3] SEAL-VALVE COVER  
  313-9550 [4] STUD-TAPERLOCK (3/8-16X2.165-IN)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP30950067
 

424-8376: KIT-ENGINE GASKET

424-8376 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N AWH1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS
FIELD REPLACEMENT FOR 272-5975 KIT-GASKET
FOR USE WITH @@@@@235-4678@@@@@, @@@@@169-4823@@@@@
i05521228 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-3445 [1] CAP-DUST  
  2D-0093 [2] GASKET  
  2P-3760 [1] GASKET  
  2P-4305 [2] GASKET  
  353-5065 [1] GASKET-OIL PAN  
  109-7425 [1] SEAL-COVER  
  126-4935 [3] SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR)  
  2M-9780 [1] SEAL-O-RING  
  3H-1461 [2] SEAL-O-RING  
  5P-5846 [1] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
  8C-5230 [2] SEAL-O-RING  
  8J-4351 [1] SEAL-O-RING  
  8L-2786 [1] SEAL-O-RING  
  9X-7378 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  109-0072 [1] SEAL-O-RING  
  109-0077 [1] SEAL-O-RING  
  114-4427 [1] SEAL-O-RING  
  121-0145 [1] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [4] SEAL-O-RING  
  225-6948 [1] SEAL-O-RING  
  228-7091 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP30950068
 

433-7629: KIT-ENGINE GASKET

433-7629 KIT-ENGINE GASKET -REAR COVER
S/N AWH1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
i06024266 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2A-1162 [2] GASKET  
  8F-1846 [1] GASKET  
  198-1517 [1] GASKET  
  5H-0244 [1] GASKET  
  9Y-6089 [2] GASKET  
  155-5619 [1] GASKET  
  4H-7869 [1] GASKET  
  142-5868 [1] SEAL-CRANKSHAFT (REAR)(REAR)  
  234-8937 [1] SEAL-INTEGRAL  
  250-0466 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP30950069
 

424-5338: KIT-FRONT COVER GASKET

424-5338 KIT-FRONT COVER GASKET
S/N AWH1-UP
KIT CONTAINS GASKET, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD REPLACEMENT FOR 248-2090 KIT-GASKET
FOR USE WITH @@@@@235-4678@@@@@, @@@@@169-4823@@@@@, T849- , T849-, T849-, T931-, T931-, T931-, T931-, T931-, T931-
i05693691 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7C-0307 J [1] GASKET  
  9H-8872 [1] GASKET  
  155-3629 [1] GASKET  
  166-9144 [1] GASKET  
  104-8585 [1] GASKET-REGULATOR  
  4N-1156 [1] GASKET-REGULATOR COVER  
  103-6045 [1] SEAL (FRONT COVER)  
  142-5867 [1] SEAL-CRANKSHAFT (FRONT)(FRONT)  
  144-6142 [1] SEAL-INTEGRAL  
  3S-9643 [1] SEAL-LIP TYPE  
  3P-1155 [2] SEAL-O-RING  
  4J-5477 [4] SEAL-O-RING  
  5E-8771 [1] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  7X-4805 [2] SEAL-O-RING  
  8L-2786 [2] SEAL-O-RING  
  8T-9527 [1] SEAL-O-RING  
  9M-3786 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  107-5769 [2] SEAL-O-RING  
  109-0077 [2] SEAL-O-RING  
  109-0093 [1] SEAL-O-RING  
  112-5282 [1] SEAL-O-RING  
  117-8801 [1] SEAL-O-RING  
  122-3772 [1] SEAL-O-RING  
  203-3940 [2] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [1] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  238-5080 [2] SEAL-O-RING  
  250-0466 [1] SEAL-O-RING  
  126-1757 [12] WASHER (10.85X19.3X1.27-MM THK)  
  129-5427 [2] WASHER-SPECIAL (SEALING)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
   
    AVAILABLE REPLACEMENT PART(S):
  399-8571 J GASKET  
  J   CLASSIC OPTIONAL REPLACEMENT PART FOR PART MARKED J
 

Information:

Caterpillar Parts SIS Catalog 980G II :

GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
GEAR GP-CAMSHAFT
204-9316 GEAR GP-CAMSHAFT
FLYWHEEL GP
4P-6817 FLYWHEEL GP
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
FASTENER GP-OIL PAN
170-0111 FASTENER GP-OIL PAN
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
108-9382 FASTENER GP-FRONT HOUSING
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
GEAR GP-FRONT
124-6818 GEAR GP-FRONT
GEAR GP-FRONT
124-6818 GEAR GP-FRONT
HOUSING GP-FLYWHEEL
160-2612 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
160-2612 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
178-7598 HOUSING GP-FRONT
424-8378 KIT-CYLINDER HEAD GASKET
424-8376 KIT-ENGINE GASKET
433-7629 KIT-ENGINE GASKET

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.