193-1745 BATTERY & WIRING GP S/N AWH1-99999 PART OF 171-3025 ELECTRICAL AR 980G II WHEEL LOADER

Pos.	Part No	Qty	Parts name
1.	2U-6654	[1]	SPACER (10X20X10-MM THK)
2.	122-0489	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747	[2]	CABLE (00-GA, BLACK)
3.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
4.	3S-2093	[13]	STRAP-CABLE
5.	115-2422	[4]	BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)
6.	7F-0560	[6]	WASHER (0.516X0.938X0.101-IN THK)
7.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
8.	7P-6681	[1]	CABLE AS
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(104CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
9.	8C-6358	[1]	BLOCK AS-JUNCTION (BATTERY)
	1D-5117	[3]	NUT-JAM (1/2-13-THD)
	8T-3519	[3]	BOLT-BRONZE (1/2-13X2-IN)
10.	7Y-3948	[1]	CABLE AS
	5P-0747 E		CABLE (00-GA, BLACK)(42CM)
11.	115-5696	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(118CM)
	6T-0465	[1]	COVER-TERMINAL (BLACK)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	9X-3410	[1]	COVER-TERMINAL
12.	118-1277	[2]	CABLE AS-BATTERY
	5P-0761 E		CABLE (00-GA, RED)(20CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
13.	118-2080	[2]	HOLD-DOWN AS
14.	122-0488	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(70CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
15.	122-0493	[1]	COVER
17.	205-7299	[13]	CLIP (LOOP)
18.	188-3023	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(190CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	9X-9120	[1]	BOOT (RED)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
19.	193-1730	[1]	BRACKET AS
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
	097-0832	[1]	SPACER (13.5X22X14-MM THK)
20.	118-2079	[4]	ROD
21.	5C-2890 M	[8]	NUT (M6X1-THD)
22.	5P-4115	[8]	WASHER-HARD (7.2X19X2-MM THK)
23.	6V-8188	[6]	NUT (1/2-13-THD)
24.	7X-0274	[1]	BOLT (5/16-18X2.75-IN)
25.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[1]	NUT (M10X1.5-THD)
27.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
29.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
30.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
31.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
33.	8T-4244 M	[2]	NUT (M12X1.75-THD)
34.	6D-4246	[2]	CLIP (LOOP)
35.	2V-1771	[2]	GROMMET
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30950191

251-8248: CABLE AS-COMMUNICATION

CABLE AS-COMMUNICATION

251-8248 CABLE AS-COMMUNICATION -WORK AREA VISUAL SYSTEM
S/N AWH1-UP
5-M (197-IN)
PART OF 267-6573 CAMERA AR

i04940450 SEBP3095

2518248 CABLE AS-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP30950192

267-6573: CAMERA AR

CAMERA AR

267-6573 CAMERA AR -REAR
S/N AWH1-UP
CUSTOM, KIT, MUST BE USED WITH EXTERNAL MIRROR GP

i06303607 SEBP3095

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 B	[40]	STRAP-CABLE
2.	130-5300	[1]	CLIP
3.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
5.	251-8248 Y	[1]	CABLE AS-COMMUNICATION
6.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
7.	333-8153	[1]	CONNECTION AS
8.	278-0123	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
9.	344-2732 Y	[1]	DISPLAY GP-CAMERA (WORK AREA VISUAL SYSTEM)
10.	263-2166 Y	[1]	HARNESS AS-MONITOR
11.	255-4368	[1]	BRACKET
12.	8M-2772 B	[11]	CLIP (LOOP)
13.	347-1668 J	[1]	CAMERA AS (115-DEG, COLOR)
14.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
15.	258-7484	[1]	BRACKET AS
17.	131-3540 M	[4]	LOCKNUT (M8X1.25-THD)
18.	266-2116	[1]	CABLE-COMMUNICATION (7.5-M)
19.	5I-4200 E		GUARD (26-CM)

			AVAILABLE REPAIR KIT(S):
	251-4162 J	[1]	KIT-BRACKET (CAMERA)
			(INCLUDES BRACKET, BOLTS, LOCK NUTS, SOCKET BOLTS, GASKET & ALLEN WRENCH )
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30950193

126-7632: CONNECTION GP-ELECTRICAL

CONNECTION GP-ELECTRICAL

126-7632 CONNECTION GP-ELECTRICAL
S/N BET1-UP
PART OF 169-4823, 202-7585, 235-4678, 235-4679 ENGINE AR-COMPLETE
FOR USE WITH SOUND PANEL

i00515077 SEBP3095

1267632 CONNECTION GP-ELECTRICAL Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-8449	[1]	STUD (3/8-16, 5/8-18X3.1-IN)
2.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	6V-8801	[1]	NUT (3/8-16-THD)
4.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
5.	101-6603	[1]	CAP (STUD PROTECTOR)

#SEBP30950194

205-1811: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

205-1811 CONTROL & MTG GP-COMMUNICATION
S/N AWH1-304
PRODUCT LINK
PART OF 205-1809 INSTALLATION AR-COMMUNICATION

i01532388 SEBP3095

2051811 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-5607	[8]	MOUNT-ISOLATION
2.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
3.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
4.	153-2325 Y	[1]	CONTROL GP-COMMUNICATION (PRODUCT LINK 201)
5.	170-9198	[2]	PLATE
6.	179-0600 Y	[1]	MOUNTING GP-ANTENNA (PRODUCT LINK)
7.	6V-7357 M	[3]	BOLT (M6X1X25-MM)
8.	6V-7728 M	[4]	BOLT (M6X1X45-MM)
9.	7I-2273 M	[4]	BOLT (M5X0.8X16-MM)
10.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30950195

205-1811: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

205-1811 CONTROL & MTG GP-COMMUNICATION
S/N AWH305-UP
PRODUCT LINK
PART OF 205-1809 INSTALLATION AR-COMMUNICATION

i01684586 SEBP3095

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	8C-5607	[8]	MOUNT-ISOLATION
3.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
4.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
5.	170-9198	[2]	PLATE
6.	207-6796 C	[1]	ANTENNA AS (FLEXIBLE)
7.	209-6417 C	[1]	CONTROL GP-COMMUNICATION (PRODUCT LINK 201)
8.	212-3290 C	[1]	BRACKET
9.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
10.	9X-2480 M	[4]	BOLT (M6X1X45-MM)
11.	8T-4956 M	[1]	BOLT (M12X1.75X35-MM)
12.	8T-4223 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-4244 CM	[1]	NUT (M12X1.75-THD)
14.	5P-9297	[1]	CLIP (LOOP)
15.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP30950196

256-5068: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

256-5068 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N AWH1-UP
PART OF 256-0336 INSTALLATION AR-COMMUNICATION

i02206655 SEBP3095

2565068 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	8C-5607	[8]	MOUNT-ISOLATION
4.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
5.	229-2704	[4]	SEAL
6.	239-9954 Y	[1]	CONTROL GP-UNPROGRAMMED (PRODUCT LINK 300)
7.	255-4369	[1]	GROMMET
8.	263-8948	[1]	ANTENNA AS (600-CM)
9.	263-9088	[1]	RADIO GP-COMMUNICATION (PRODUCT LINK 121SR)
10.	264-4872	[1]	BRACKET AS
11.	264-7671	[1]	BRACKET
12.	276-0031	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-6772	[2]	STRAP-CABLE
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
13.	122-8705 M	[1]	U-BOLT (M10X1.5-MM THD)
14.	156-6175	[2]	CLIP (LADDER)
15.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
16.	8C-8451 M	[3]	BOLT (M6X1X40-MM)
17.	8T-2947 M	[1]	BOLT (M6X1X45-MM)
18.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4133 M	[2]	NUT (M10X1.5-THD)
20.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
21.	9X-2046 M	[2]	SCREW-TRUSS HEAD (M6X1X35-MM)
22.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
23.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30950197

191-3075: CONTROL & MTG GP-ENGINE ELEK

CONTROL & MTG GP-ENGINE ELEK

191-3075 CONTROL & MTG GP-ENGINE ELEK
S/N BET1-UP
DELUXE
PART OF 169-4823, 202-7585, 235-4678, 235-4679 ENGINE AR-COMPLETE

i01429030 SEBP3095

1913075 CONTROL & MTG GP-ENGINE ELEK Parts scheme

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-1418	[2]	SPACER (8.2X12.7X28.7-MM THK)
2.	8T-9655	[8]	MOUNT-ISOLATION
3.	118-7809	[1]	PLATE
4.	168-4594	[2]	SPACER (8.5X12.7X54.1-MM)
5.	175-1367	[1]	SPACER (8.8X16X10-MM THK)
6.	210-0849 Y	[1]	CONTROL GP-ENGINE ELECTRONIC
7.	190-7645	[1]	PLATE AS
	9D-4439	[2]	STUD-WELD (3/8-16X1-IN)
8.	191-3034	[1]	SUPPORT
9.	0S-1618	[1]	BOLT (5/16-18X1-IN)
10.	1D-4538	[1]	BOLT (5/16-18X2.25-IN)
11.	1D-4540	[1]	BOLT (5/16-18X2.75-IN)
12.	1D-4541	[1]	BOLT (5/16-18X3-IN)
13.	1F-5842	[1]	BOLT (5/16-18X3.25-IN)
14.	1H-5514	[3]	BOLT (5/16-18X1.625-IN)
17.	5S-0003	[1]	NUT (5/16-18-THD)
18.	7X-0613	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
19.	9M-1974	[9]	WASHER-HARD (8.8X16X2-MM THK)
20.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP30950198

175-4216: CONTROL AR-AUTODIG

CONTROL AR-AUTODIG

175-4216 CONTROL AR-AUTODIG
S/N AWH1-UP
PART OF 257-2195 MACHINE AR

i01473492 SEBP3095

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
190-0057 Y	[1]	CONTROL GP-AUTODIG (CAB)
178-7917 Y	[1]	MOUNTING GP-PRESSURE SENSOR (AUTODIG)
150-0343 Y	[1]	WIRING GP-SENSOR (AUTODIG)
Y		SEPARATE ILLUSTRATION

#SEBP30950199

2Q-7788: CONTROL AR-AUTODIG

CONTROL AR-AUTODIG

2Q-7788 CONTROL AR-AUTODIG -CUSTOM
S/N AWH1-UP
KIT,AUTODIG CONTROL; WITH PAYLOAD CONTROL

i01766681 SEBP3095

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4E-2229 J	[1]	DAMPER AS-ALARM
2.	106-0107 J	[1]	SWITCH GP-ROTARY (AUTODIG MATERIAL SELECTOR)
	102-8805 J	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383 J	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	7Y-5458 JM	[1]	NUT (M12X1-THD)
	7Y-5464 J	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737 J	[1]	PLUG-SEAL
	106-0210 J	[1]	SEAL
	144-1636 J	[5]	PIN-CONNECTOR (14-GA TO 18-GA)
3.	110-6109 J	[1]	KNOB-CONTROL
4.	123-9694 J	[1]	HORN
5.	175-2209 J	[1]	SWITCH AS-PUSH BUTTON (AUTODIG TRIGGER)
	3E-3371 J	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6F-0253 J	[1]	LOCKWASHER
	186-3735 J	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803 J	[1]	KIT-RECEPTACLE (3-PIN)
	172-3511	[1]	NUT (5/8-24-THD)
6.	200-8064 BJ	[1]	FILM-CONTROL (AUTODIG)
7.	201-1531 J	[1]	FILM-IDENTIFICATION (AUTODIG)
8.	219-9539 J	[1]	SWITCH AS-ROCKER (AUTODIG MODE SELECTOR)
9.	219-9540 J	[1]	SWITCH AS-ROCKER (AUTODIG KICKOUT SET)
10.	7Y-5464 J	[1]	WASHER (12.2X15.4X0.5-MM THK)
	3E-0109 L	[2]	PLUG (ROCKER SWITCH)
	8R-3695 L	[1]	GROMMET
	173-2173 L	[1]	FILM-IDENTIFICATION (UPPER PANEL, CCS)
	214-0113 N	[1]	CONFIGURATION-PREMIUM

	175-4216	[1]	CONTROL AR-AUTODIG (KIT)
	184-4924	[1]	CONTROL AR-AUTODIG (KIT)
	189-4829	[1]	CONTROL AR-AUTODIG (KIT)
			THESE AR ARE USED FOR FIELD INSTALLING AUTODIG CONTROL SYSTEM ON THE 980G II,
			972G II,966G II,962G II,950G II WHEEL LOADERS.PAYLOAD CONTROL SYSTEM MUST HAVE
			HAVE BEEN PREVIOUSLY INSTALLED ON THESE MACHINES OR THE 2Q-7789 CONTROL AR-AUTODIG WITHOUT PAYLOAD CONTROL SHOULD BE
			USED INSTEAD OF THIS PART NUMBER.

	B		USE AS REQUIRED
	J		PART OF STANDARD CONTROL GP-AUTODIG(CAB)
	L		MUST REMOVE FROM THE MACHINE WHEN INSTALLING AUTODIG CONTROL KIT
	M		METRIC PART
	N		THESE INSTRUCTIONS MUST BE USED TO INSTALL PASSWORD AND AUTODIG CONTROL AR