AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-4773 FILLER GP-POWER TRAIN OIL S/N AWH1032-99999 PART OF 171-3030 POWER TRAIN AR 980G II WHEEL LOADER


POWER TRAIN
FILLER GP-POWER TRAIN OIL
FILTER GP
GAUGE GP-OIL LEVEL (DIPSTICK)
GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
AXLE GP
KIT

WHEEL LOADER 980G II WHEEL LOADER AWH
 980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine SEBP3095 980G II AWH   (1999)

POWER TRAIN

FILLER GP-POWER TRAIN OIL
COVER GP-XMSN OIL FILLER CAP
7K-5636 COVER GP-XMSN OIL FILLER CAP
FILLER GP-POWER TRAIN OIL
110-4773 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
110-4773 FILLER GP-POWER TRAIN OIL
 

#SEBP30950400
 

110-4773: FILLER GP-POWER TRAIN OIL

110-4773 FILLER GP-POWER TRAIN OIL
S/N AWH1032-99999
PART OF 171-3030 POWER TRAIN AR
i01928944 SEBP3095
1104773 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-9782 [1] BALL  
2. 5P-1291 BE HOSE  
3. 5K-1568 [1] CAP-FILLER  
4. 141-1667 [2] CLAMP-HOSE  
5. 6F-5188 [1] SEAL-RING  
6. 6H-5139 [1] PLATE-PRESSURE  
7. 1P-3705 [1] SEAL-RECTANGULAR  
8. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
9. 115-7440 [1] BRACKET AS  
10. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
11. 124-7645 [1] BRACKET AS  
12. 132-6272 [1] TUBE AS  
13. 132-6273 [1] TUBE AS  
14. 7X-0311 [4] BOLT (7/16-14X2.25-IN)  
15. 8T-4121 C [6] WASHER-HARD (11X21X2.5-MM THK)  
16. 5P-7468 [2] CLIP (SLOT)  
17. 5P-7469 [2] CLIP (TAB)  
18. 5P-8444 [2] GROMMET (37-MM ID)  
19. 8T-5360 C [4] WASHER (12X22.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP30950401
 

6P-4603: FILTER GP-OIL

6P-4603 FILTER GP-OIL -POWER TRAIN
S/N AWH1-99999
WITH HOUSING
PART OF 187-9353 LINES GP-POWER TRAIN OIL
i00092821 SEBP3095
6P4603 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2824 [1] SEAL-O-RING  
2. 3T-0688 [1] SPOOL  
3. 9M-1986 [1] SPRING  
4. 9S-4191 [3] PLUG (9/16-18-THD)  
  3J-1907 [3] SEAL-O-RING  
5. 6P-4227 [1] BASE-OIL FILTER  
6. 1R-0719 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
    -OR-
  4T-3131 [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  132-8875 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
    (AFTER INITIAL 8 HOURS OF CONTINUOUS OPERATION CHANGE ELEMENT TO STANDARD EFFICIENCY ELEMENT)
7. 2J-6356 [1] RING-RETAINING  
8. 7S-6745 [1] RETAINER  
9. 3S-8652 [1] SPRING  
10. 3P-0887 [1] HOUSING AS  
11. 2S-8439 [1] SEAL-O-RING  
 

#SEBP30950402
 

2Q-7705: GAUGE GP-OIL LEVEL (DIPSTICK)

2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK) -CUSTOM
S/N AWH1-UP
PART OF 232-1119, 241-0460 WASTE HANDLING AR
i00947867 SEBP3095
2Q7705 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Q-7703 [1] TUBE AS  
2. 2Q-7704 [1] PLUNGER AS  
3. 2Q-7715 [2] UNION  
4. 4D-9517 [1] CLIP (SLOT)  
5. 5J-2974 [2] SEAL-O-RING  
6. 5P-9299 [1] CLIP (LOOP)  
7. 6V-8398 [3] SEAL-O-RING  
8. 6V-9830 [1] CAP (ORFS)  
9. 6V-9851 [1] ELBOW  
10. 7D-7233 [2] CLIP (LOOP)  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [2] NUT (M10X1.5-THD)  
13. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP30950403
 

108-3120: GEAR GP-OUTPUT TRANSFER

108-3120 GEAR GP-OUTPUT TRANSFER
S/N AWH1-UP; 1WY2149-99999; 7WY1512-99999
PART OF 116-7684, 173-1870, 189-8138 TRANSMISSION AR
i01880257 SEBP3095
1083120 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6640 B SEALANT  
2. 5P-2587 [1] SEAL-O-RING  
3. 105-2486 [1] GEAR-TRANSFER (41-TEETH)  
4. 105-2487 [1] GEAR-OUTPUT (40-TEETH)  
5. 2H-6489 [1] RACE-BEARING OUTER  
6. 237-9849 [1] CAGE-BEARING  
7. 034-3557 [10] BOLT-LOCKING (3/8-16X1.125-IN)  
8. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 171-3942 [1] YOKE  
10. 216-0273 C [2] SEAL-LIP TYPE  
11. 1P-4078 [1] SPACER (90.47X107.95X10.08-MM THK)  
12. 2A-4639 [6] BOLT (3/8-16X1.625-IN)  
13. 6P-4947 [1] RETAINER  
14. 9X-8874 [8] BOLT (1/2-13X3-IN)  
15. 5P-8245 [51] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 1P-7834 [4] CUP-BEARING  
17. 5F-3092 [1] SEAL-O-RING  
18. 174-3405 [1] YOKE AS  
19. 1V-6341 [1] SEAL  
20. 0L-1328 [2] BOLT (3/4-16X4-IN)  
21. 237-9848 [1] CAGE-BEARING  
22. 5J-1086 [1] SEAL-O-RING  
23. 7L-2181 [1] SEAL-O-RING  
24. 3F-5792 [1] SEAL-O-RING  
25. 1P-9269 [1] COVER  
26. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
27. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
28. 6Y-6326 [1] CAGE AS-BEARING  
28A. 3D-0490 [4] STUD-TAPERLOCK (1/2-13X1.97-IN)  
29. 9X-8268 [1] WASHER (17.5X30X3.5-MM THK)  
30. 6Y-6329 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
31. 2D-9457 [2] CONE-BEARING (TAPERED ROLLER)  
32. 105-2485 [1] GEAR-OUTPUT (34-TEETH)  
33. 9W-0781 [1] SPACER (71.39X95X10.87-MM THK)  
34. 6Y-6327 [1] CAGE-BEARING  
35. 6Y-6328 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
36. 9X-8873 [8] BOLT (1/2-13X2.25-IN)  
37. 9W-0780 [1] SHAFT-TRANSFER  
38. 2K-4472 [1] SEAL-O-RING  
39. 129-0987 [1] DRAIN AS  
  6J-2419 [1] SEAL-O-RING  
  8F-0212 [1] SEAL-O-RING  
  175-4946 [1] PLUG-DRAIN  
40. 1A-5822 [7] BOLT (1/2-13X2.75-IN)  
41. 8H-8257 [1] SEAL-O-RING  
42. 2H-2665 [2] SEAL-O-RING  
43. 1A-1460 [7] BOLT (1/2-13X2-IN)  
44. 0S-1587 [8] BOLT (1/2-13X1.75-IN)  
45. 2H-6490 [1] BEARING-INNER  
46. 7B-3235 [3] BOLT (1/2-13X1.375-IN)  
47. 1P-7835 [4] CONE-BEARING  
48. 266-9266 [2] RETAINER  
49. 4F-2041 [2] CUP-BEARING (TAPERED ROLLER)  
50. 5F-8000 [1] SEAL-O-RING  
51. 1A-8651 [2] BOLT (5/8-11X4.5-IN)  
52. 5F-0149 [1] SEAL-O-RING  
53. 1B-4367 [18] BOLT (5/8-11X3-IN)  
54. 5P-8247 [20] WASHER-HARD (17X32X3.5-MM THK)  
55. 0S-1594 [4] BOLT (3/8-16X1-IN)  
56. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
57. 4S-8598 [1] SCREEN-SUCTION  
58. 240-8259 [1] SCREEN GP-MAGNETIC  
59. 7T-7371 [1] HOUSING-SCREEN  
60. 6P-4903 [1] PLATE AS  
60A. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
60B. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
63. 128-1650 [1] CASE AS-TRANSFER  
63A. 2A-3798 [2] DOWEL (15.71 MM OD)  
63B. 8P-8837 [1] TUBE AS  
63C. 0S-1594 [1] BOLT (3/8-16X1-IN)  
63D. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
70. 142-5603 C [1] GAUGE AS  
70A. 122-8352 [4] SEAL-O-RING  
70B. 122-8353 M [2] BOLT (M12X1.75X46.5-MM)  
73. 6Y-6848 [1] COVER  
74. 189-5746 Y [1] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950404
 

108-3120: GEAR GP-OUTPUT TRANSFER

108-3120 GEAR GP-OUTPUT TRANSFER
S/N 1AY1-6257; 7WY1-1511
PART OF 106-6452, 173-1870 TRANSMISSION AR
i00595859 SEBP3095
1083120 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6640 B SEALANT  
2. 5P-2587 [1] SEAL-O-RING  
3. 105-2486 [1] GEAR-TRANSFER (41-TEETH)  
4. 105-2487 [1] GEAR-OUTPUT (40-TEETH)  
5. 2H-6489 [1] RACE-BEARING OUTER  
6. 1P-4082 [1] CAGE-BEARING  
7. 034-3557 [10] BOLT-LOCKING (3/8-16X1.125-IN)  
8. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 171-3942 [1] YOKE  
10. 216-0273 [2] SEAL-LIP TYPE  
11. 1P-4078 [1] SPACER (90.47X107.95X10.08-MM THK)  
12. 2A-4639 [6] BOLT (3/8-16X1.625-IN)  
13. 6P-4947 [1] RETAINER  
14. 9X-8874 [8] BOLT (1/2-13X3-IN)  
15. 5P-8245 [51] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 1P-7834 [4] CUP-BEARING  
17. 5F-3092 [1] SEAL-O-RING  
18. 174-3405 [1] YOKE AS  
19. 3S-9880 [1] GUARD  
20. 1A-3103 [2] BOLT (3/4-16X3.75-IN)  
21. 1P-4079 [1] CAGE-BEARING  
22. 5J-1086 [1] SEAL-O-RING  
23. 7L-2181 [1] SEAL-O-RING  
24. 3F-5792 [1] SEAL-O-RING  
25. 1P-9269 [1] COVER  
26. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
27. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
28. 6Y-6326 [1] CAGE AS-BEARING  
29. 3D-0490 [4] STUD-TAPERLOCK (1/2-13X1.97-IN)  
30. 6Y-6329 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
31. 2D-9457 [2] CONE-BEARING (TAPERED ROLLER)  
32. 105-2485 [1] GEAR-OUTPUT (34-TEETH)  
33. 9W-0781 [1] SPACER (71.39X95X10.87-MM THK)  
34. 6Y-6327 [1] CAGE-BEARING  
35. 6Y-6328 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
36. 9X-8873 [8] BOLT (1/2-13X2.25-IN)  
37. 9W-0780 [1] SHAFT-TRANSFER  
38. 2K-4472 [1] SEAL-O-RING  
39. 129-0987 [1] DRAIN AS  
  6J-2419 [1] SEAL-O-RING  
  8F-0212 [1] SEAL-O-RING  
  175-4946 [1] PLUG-DRAIN  
40. 1A-5822 [7] BOLT (1/2-13X2.75-IN)  
41. 8H-8257 [1] SEAL-O-RING  
42. 2H-2665 [2] SEAL-O-RING  
43. 1A-1460 [7] BOLT (1/2-13X2-IN)  
44. 0S-1587 [8] BOLT (1/2-13X1.75-IN)  
45. 2H-6490 [1] BEARING-INNER  
46. 7B-3235 [3] BOLT (1/2-13X1.375-IN)  
47. 1P-7835 [4] CONE-BEARING  
48. 7K-1695 [2] RETAINER  
49. 4F-2041 [2] CUP-BEARING (TAPERED ROLLER)  
50. 5F-8000 [1] SEAL-O-RING  
51. 1A-8651 [2] BOLT (5/8-11X4.5-IN)  
52. 5F-0149 [1] SEAL-O-RING  
53. 1B-4367 [18] BOLT (5/8-11X3-IN)  
54. 5P-8247 [20] WASHER-HARD (17X32X3.5-MM THK)  
55. 0S-1594 [4] BOLT (3/8-16X1-IN)  
56. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
57. 4S-8598 [1] SCREEN-SUCTION  
58. 4S-8603 [1] SCREEN GP-MAGNETIC  
59. 7T-7371 [1] HOUSING-SCREEN  
60. 6P-4903 [1] PLATE AS  
61. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
62. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
63. 128-1650 [1] CASE AS-TRANSFER  
64. 2A-3798 [2] DOWEL (15.71 MM OD)  
65. 8P-8837 [1] TUBE AS  
66. 0S-1594 [1] BOLT (3/8-16X1-IN)  
67. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
68. 8M-8659 [2] DOWEL  
69. 6I-8274 [2] COVER-GEAR HOUSING  
  3P-2411 [1] COVER-GEAR HOUSING  
70. 142-5603 C [1] GAUGE AS  
71. 122-8352 [4] SEAL-O-RING  
72. 122-8353 M [2] BOLT (M12X1.75X46.5-MM)  
73. 6Y-6848 [1] COVER  
74. 189-5746 [1] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1386 E SLEEVE (14 CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP30950405
 

199-0874: KIT-DIFFERENTIAL BEARING

199-0874 KIT-DIFFERENTIAL BEARING
S/N AWH1-UP
CONTAINS BUSHINGS, BEARINGS, NUT, LIP SEAL, O-RING SEALS, WASHERS AND THRUST WASHERS
FIELD REPLACEMENT ORDER @@@@@275-2315@@@@@
i01694665 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  149-2915 [4] BUSHING  
  1L-7518 [1] CONE-BEARING  
  6K-5529 [1] CONE-BEARING  
  8E-7926 [1] CONE-BEARING  
  8S-9075 [1] CONE-BEARING  
  6B-4370 [1] CUP-BEARING  
  6K-5528 [1] CUP-BEARING  
  8E-7927 [1] CUP-BEARING  
  8S-9076 [1] CUP-BEARING  
  6W-4750 [1] NUT-STAKE (LOCK)  
  127-1960 M [8] SCREW-FLAT HEAD (M6X1X16-MM)  
  133-4292 [1] SEAL-LIP TYPE  
  3K-0360 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8F-5900 [1] SEAL-O-RING  
  9F-1399 [1] SEAL-O-RING  
  9H-0846 [1] SEAL-O-RING  
  149-2913 [4] WASHER  
  208-7535 [2] WASHER-THRUST  
  M   METRIC PART
 

#SEBP30950406
 

275-2315: KIT-DIFFERENTIAL BEARING

275-2315 KIT-DIFFERENTIAL BEARING
S/N AWH1-UP
CONTAINS BUSHINGS, BEARINGS, NUT, LIP SEAL, O-RING SEALS AND THRUST WASHERS
FIELD REPLACEMENT FOR @@@@@199-0874@@@@@
i05921737 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  251-6482 [1] BEARING AS-TAPERED ROLLER  
  251-6483 [1] BEARING AS-TAPERED ROLLER  
  149-2915 [4] BUSHING  
  6K-5529 [1] CONE-BEARING  
  8E-7926 [1] CONE-BEARING  
  6K-5528 [1] CUP-BEARING  
  8E-7927 [1] CUP-BEARING  
  6W-4750 [1] NUT-STAKE (LOCK)  
  127-1960 M [8] SCREW-FLAT HEAD (M6X1X16-MM)  
  133-4292 [1] SEAL-LIP TYPE  
  3K-0360 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8F-5900 [1] SEAL-O-RING  
  9F-1399 [1] SEAL-O-RING  
  9H-0846 [1] SEAL-O-RING  
  217-3683 [4] WASHER-THRUST  
  208-7535 [2] WASHER-THRUST  
  M   METRIC PART
 

#SEBP30950407
 

199-0875: KIT-FINAL DRIVE BEARING

199-0875 KIT-FINAL DRIVE BEARING
S/N AWH1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS, THRUST WASHERS/DISCS, ROLL PINS/SPRING PINS, GASKETS, SEALS. BENDABLE LOCKS, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.
i06007270 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-8743 [3] BUSHING  
  2P-8353 [1] CONE-BEARING  
  7M-5334 [1] CONE-BEARING  
  2D-6511 [1] CUP-BEARING  
  5F-2465 [1] CUP-BEARING  
  9G-5319 [1] SEAL GP-DUO-CONE  
  4M-0660 [2] RING-SEALING  
  3K-0360 [1] SEAL-O-RING  
  5F-1678 [1] SEAL-O-RING  
  5J-1086 [1] SEAL-O-RING  
  6D-0692 [1] SEAL-O-RING  
  7M-8485 [5] SEAL-O-RING  
  9X-3977 [1] SEAL-RING  
  109-9719 [6] WASHER-THRUST  
  163-4526 [1] WASHER-THRUST (72.5X94X5-MM THK)  
 

#SEBP30950408
 

263-7658: KIT-TRANSMISSION BEARING

263-7658 KIT-TRANSMISSION BEARING -POWER SHIFT TRANSMISSION
S/N AWH1-UP
CONTAINS BEARINGS, BUSHINGS, THRUST DISCS, DOWELS, SPRING PINS AND METAL SEAL RINGS
FOR USE WITH @@@@@116-7684@@@@@
i05921599 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1B-3867 [1] BALL BEARING  
  2D-5658 [1] BALL BEARING  
  6Y-3484 [3] BALL BEARING  
  106-7798 [2] BALL BEARING  
  5M-2054 [8] BEARING  
  2S-0679 [1] BEARING AS-ROLLER  
  5M-6126 [3] BEARING AS-ROLLER  
  5M-7925 [6] BEARING AS-ROLLER  
  9S-5279 [1] BEARING AS-ROLLER  
  2H-6490 [1] BEARING-INNER  
  5P-0403 [1] BEARING-ROLLER  
  1T-0655 [2] BEARING-THRUST  
  1T-1078 [1] BEARING-THRUST  
  1T-0577 [2] BUSHING  
  7J-8893 [1] CONE-BEARING  
  2D-9457 [2] CONE-BEARING (TAPERED ROLLER)  
  7K-5449 [1] CONE-BEARING  
  178-4640 [4] CONE-BEARING  
  4F-2041 [2] CUP-BEARING (TAPERED ROLLER)  
  7K-5448 [1] CUP-BEARING  
  178-4641 [4] CUP-BEARING  
  7J-8894 [1] CUP-BEARING  
  8E-8304 [14] DISC-THRUST  
  8E-8316 [6] DISC-THRUST  
  282-5042 [12] DISC-THRUST  
  4S-8537 [3] DOWEL  
  1N-5981 [2] PIN-SPRING  
  3S-2708 [10] PIN-SPRING  
  6B-6863 [1] PIN-SPRING  
  112-4511 [3] PIN-SPRING  
  2H-6489 [1] RACE-BEARING OUTER  
  5P-3867 [1] RACE-BEARING OUTER  
  1T-0686 [4] RACE-THRUST BEARING  
  1T-0762 [1] RACE-THRUST BEARING  
  1T-0763 [1] RACE-THRUST BEARING  
  5M-6187 [1] RING-METAL SEAL  
  6F-0156 [1] RING-METAL SEAL  
  9F-3788 [1] RING-METAL SEAL  
  9M-1503 [1] RING-METAL SEAL  
  1P-3958 [3] ROLLER AS-SPECIAL  
  3P-3321 [2] SEAL-METAL RING  
  8P-4617 [1] SEAL-METAL RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP30950409
 

536-6791: KIT-TRANSMISSION BEARING

536-6791 KIT-TRANSMISSION BEARING
S/N AWH1-UP
POWER SHIFT TRANSMISSION OVERHAUL DRIVE TRAIN BEARING KIT
FOR USE WITH @@@@@173-1870@@@@@
i07218358 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2D-5658 [1] BALL BEARING  
  5P-5045 [1] BALL BEARING  
  6Y-3484 [1] BALL BEARING  
  7T-8816 [3] BALL BEARING  
  5D-2989 [4] BEARING  
  5M-2054 [8] BEARING  
  5M-6126 [8] BEARING AS-ROLLER  
  5P-3930 [3] BEARING AS-ROLLER  
  2H-6490 [1] BEARING-INNER  
  9G-6743 [1] BUSHING  
  9G-6744 [1] BUSHING  
  1P-7835 [4] CONE-BEARING  
  2D-9457 [2] CONE-BEARING (TAPERED ROLLER)  
  1P-7834 [4] CUP-BEARING  
  4F-2041 [1] CUP-BEARING (TAPERED ROLLER)  
  8E-8299 [6] DISC-THRUST  
  8E-8304 [24] DISC-THRUST  
  8E-8305 [8] DISC-THRUST  
  3S-2708 [11] PIN-SPRING  
  6B-6863 [1] PIN-SPRING  
  7M-5130 [1] PIN-SPRING  
  112-4511 [4] PIN-SPRING  
  2H-6489 [1] RACE-BEARING OUTER  
  1M-3937 [1] RING-METAL SEAL  
  6F-0156 [1] RING-METAL SEAL  
  131-4091 [1] SEAL-RING  
 

Information:

Caterpillar Parts SIS Catalog 980G II :

FILLER GP-POWER TRAIN OIL
110-4773 FILLER GP-POWER TRAIN OIL
DRAIN GP-ECOLOGY
173-0558 DRAIN GP-ECOLOGY
DIFFERENTIAL GP-NOSPIN
124-6555 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-NOSPIN
110-3799 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-LIMITED SLIP
159-5963 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP
252-9130 DIFFERENTIAL GP
DIFFERENTIAL GP
149-2911 DIFFERENTIAL GP
DIFFERENTIAL & BEVEL GEAR GP
251-7689 DIFFERENTIAL & BEVEL GEAR GP
FILTER GP-OIL
6P-4603 FILTER GP-OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK)
GEAR GP-OUTPUT TRANSFER
108-3120 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
108-3120 GEAR GP-OUTPUT TRANSFER
199-0874 KIT-DIFFERENTIAL BEARING
275-2315 KIT-DIFFERENTIAL BEARING
199-0875 KIT-FINAL DRIVE BEARING
263-7658 KIT-TRANSMISSION BEARING

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.