POWER TRAIN
VALVE GP-SOLENOIDCONTROL GP-TRANSMISSION HYD
AXLE GP
FRAME AND BODY
GUARD GPPOWER TRAIN
VALVE GP-SOLENOID
#SEBP30950480
147-5399: VALVE GP-SOLENOID
147-5399 VALVE GP-SOLENOID
S/N AWH1-UP; 1AY1-UP; 1WY1-UP; 7WY1-UP
12 VOLT DC
PART OF 107-4414, 116-7196 VALVE GP-TRANSMISSION CONTROL
S/N AWH1-UP; 1AY1-UP; 1WY1-UP; 7WY1-UP
12 VOLT DC
PART OF 107-4414, 116-7196 VALVE GP-TRANSMISSION CONTROL
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-8611 | [1] | CARTRIDGE AS | |
| 111-0343 | [1] | LOCKNUT (5/16-18-THD) | ||
| 149-5628 | [1] | WASHER (8.3X38.1X1.2-MM THK) | ||
| 2. | 218-9901 | [1] | COIL AS | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 3. | 149-5628 | [1] | WASHER (8.3X38.1X1.2-MM THK) | |
| 4. | 111-0343 | [1] | LOCKNUT (5/16-18-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 100-4083 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
#SEBP30950481
279-6528: VALVE GP-SOLENOID
279-6528 VALVE GP-SOLENOID
S/N AWH1-99999
24-VOLT
FIELD REPLACEMENT FOR @@@@@203-4157@@@@@
S/N AWH1-99999
24-VOLT
FIELD REPLACEMENT FOR @@@@@203-4157@@@@@
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP30950482
107-4414: VALVE GP-TRANSMISSION CONTROL
107-4414 VALVE GP-TRANSMISSION CONTROL
S/N 1AY1-UP; 7WY1-UP
PART OF 107-4408 CONTROL GP-TRANSMISSION HYD
S/N 1AY1-UP; 7WY1-UP
PART OF 107-4408 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-5158 Y | [1] | VALVE GP-SELECTOR | |
| 2. | 8E-4320 | [1] | PLATE | |
| 3. | 107-4409 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 4. | 108-2521 | [1] | MANIFOLD-TOP | |
| 5. | 8E-4387 | [1] | MANIFOLD | |
| 6. | 8E-7841 | [1] | CLIP AS-CONNECTING | |
| 7. | 2B-2695 | [3] | BOLT (5/16-18X0.875-IN) | |
| 8. | 9M-1974 C | [35] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 10. | 5L-1761 | [21] | BOLT (5/16-18X5.5-IN) | |
| 11. | 9S-8007 | [12] | PLUG | |
| 12. | 7J-0204 | [12] | SEAL-O-RING | |
| 13. | 147-5399 Y | [6] | VALVE GP-SOLENOID (TRANSMISSION CLUTCH) | |
| 14. | 131-2150 C | [1] | HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS) | |
| 15. | 8E-7842 | [1] | CLIP AS-CONNECTING | |
| 16. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 17. | 0S-1588 C | [3] | BOLT (3/8-16X1.25-IN) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 106-6305 C | [1] | SPACER (17.09-MM THK) | |
| 20. | 1L-5081 C | [3] | SPACER (0.41X0.75X0.56-IN THK) | |
| 21. | 5M-2894 C | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 1P-7404 | [1] | EYEBOLT (5/16-18X1.15-IN) | |
| 23. | 8M-2772 | [4] | CLIP (LOOP) | |
| 24. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 25. | 031-2701 C | [1] | BOLT-LOCKING (5/16-18X1.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30950483
116-7196: VALVE GP-TRANSMISSION CONTROL
116-7196 VALVE GP-TRANSMISSION CONTROL
S/N AWH1-UP; 1WY1-UP
PART OF 116-7197 CONTROL GP-TRANSMISSION HYD, 189-8137 VALVE GP-TRANSMISSION CONTROL
S/N AWH1-UP; 1WY1-UP
PART OF 116-7197 CONTROL GP-TRANSMISSION HYD, 189-8137 VALVE GP-TRANSMISSION CONTROL
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-6398 Y | [1] | VALVE GP-SELECTOR (TRANSMISSION)(TRANSMISSION) | |
| 2. | 8E-4320 | [1] | PLATE | |
| 3. | 124-5200 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 4. | 108-2521 | [1] | MANIFOLD-TOP | |
| 5. | 8E-4387 | [1] | MANIFOLD | |
| 6. | 8E-7841 | [1] | CLIP AS-CONNECTING | |
| 7. | 2B-2695 | [3] | BOLT (5/16-18X0.875-IN) | |
| 8. | 9M-1974 | [35] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 10. | 5L-1761 | [21] | BOLT (5/16-18X5.5-IN) | |
| 11. | 9S-8007 | [12] | PLUG | |
| 12. | 7J-0204 | [12] | SEAL-O-RING | |
| 13. | 147-5399 Y | [6] | VALVE GP-SOLENOID (TRANSMISSION CLUTCH) | |
| 14. | 131-2150 | [1] | HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS) | |
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 8E-7842 | [1] | CLIP AS-CONNECTING | |
| 16. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 17. | 0S-1588 | [3] | BOLT (3/8-16X1.25-IN) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 106-6305 | [1] | SPACER (17.09-MM THK) | |
| 20. | 1L-5081 | [3] | SPACER (0.41X0.75X0.56-IN THK) | |
| 21. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 1P-7404 | [1] | EYEBOLT (5/16-18X1.15-IN) | |
| 23. | 8M-2772 | [4] | CLIP (LOOP) | |
| 24. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 25. | 031-2701 | [1] | BOLT-LOCKING (5/16-18X1.25-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30950484
189-8137: VALVE GP-TRANSMISSION CONTROL
189-8137 VALVE GP-TRANSMISSION CONTROL -CUSTOM
S/N AWH1-UP
PART OF 189-8136 CONTROL GP-TRANSMISSION HYD
S/N AWH1-UP
PART OF 189-8136 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 189-8134 | [1] | HARNESS AS-TRANSMISSION (CONTROL VALVE) | ||
| 3E-5136 | [1] | RECEPTACLE AS-CONNECTOR (5-PIN) | ||
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 189-8139 | [1] | PLATE | ||
| 116-7196 Y | [1] | VALVE GP-TRANSMISSION CONTROL | ||
| *****STANDARD REMOVAL***** | ||||
| 131-2150 | [1] | HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS) | ||
| [1] | PLATE-IDENTIFICATION | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30950485
160-5585: WHEEL & FINAL DRIVE GP
160-5585 WHEEL & FINAL DRIVE GP
S/N AWH1-99999
PART OF 172-5386, 183-4686 AXLE AR-FIXED, 172-5385, 183-4684, 183-4685 AXLE AR-OSCILLATING
S/N AWH1-99999
PART OF 172-5386, 183-4686 AXLE AR-FIXED, 172-5385, 183-4684, 183-4685 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8097 M | [6] | BOLT (M12X1.75X30-MM) | |
| 2. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 129-3046 | [1] | CARRIER-PLANETARY | |
| 4. | 297-3030 | [3] | SHAFT-PLANETARY | |
| 5. | 6T-5545 | [3] | DOWEL | |
| 6. | 105-8743 | [3] | BUSHING | |
| 7. | 109-9719 | [6] | WASHER-THRUST | |
| 8. | 5J-1086 | [1] | SEAL-O-RING | |
| 9. | 9X-3977 | [1] | SEAL-RING | |
| 10. | 8T-8441 M | [3] | BOLT-SOCKET HEAD (M12X1.75X25-MM) | |
| 11. | 163-4527 | [1] | PLATE-BEARING | |
| 12. | 8T-2393 M | [10] | BOLT-SOCKET HEAD (M16X2X60-MM) | |
| 13. | 8K-0066 B | [1] | SHIM (0.112-IN THK) | |
| 14. | 110-0551 | [1] | HUB AS | |
| 8K-0079 | [1] | BUSHING-TERMINAL | ||
| 15. | 108-0350 | [1] | RING-RETAINING | |
| 16. | 8T-5091 M | [3] | BOLT (M8X1.25X20-MM) | |
| 17. | 8E-9571 | [3] | WASHER-HARD (8.8X16X7-MM THK) | |
| 18. | 319-5239 | [1] | WHEEL | |
| 19. | 7M-5334 | [1] | CONE-BEARING | |
| 20. | 5F-2465 | [1] | CUP-BEARING | |
| 21. | 2P-8353 | [1] | CONE-BEARING | |
| 22. | 2D-6511 | [1] | CUP-BEARING | |
| 23. | 135-7742 | [1] | SPINDLE | |
| 24. | 163-4526 | [1] | WASHER-THRUST (72.5X94X5-MM THK) | |
| 25. | 5P-4483 | [1] | PLUG | |
| 26. | 7M-8485 | [1] | SEAL-O-RING | |
| 27. | 249-7870 | [1] | GEAR-SUN (17-TEETH) | |
| 28. | 159-8169 | [3] | GEAR-PLANETARY (22-TEETH) | |
| 29. | 110-4802 | [1] | GEAR-RING (64-TEETH) | |
| 30. | 110-2055 | [1] | COVER AS | |
| 1U-8846 B | [1] | SEALANT-GASKET | ||
| 099-4691 M | [2] | BOLT-LOCKING (M12X1.75X25-MM) | ||
| 109-7848 | [1] | BUTTON | ||
| 31. | 6D-0692 | [1] | SEAL-O-RING | |
| 32. | 2S-0736 | [10] | WASHER-HARD (17X27X3.5-MM THK) | |
| 33. | 8M-3837 | [1] | PLUG-MAGNETIC | |
| 34. | 1S-3889 | [1] | WASHER | |
| 35. | 5F-1678 | [1] | SEAL-O-RING | |
| 36. | 9G-5319 | [1] | SEAL GP-DUO-CONE | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP30950486
232-7554: WHEEL & FINAL DRIVE GP
232-7554 WHEEL & FINAL DRIVE GP
S/N AWH1-99999
PART OF 172-5385 AXLE AR-OSCILLATING
S/N AWH1-99999
PART OF 172-5385 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-3889 | [1] | WASHER | |
| 2. | 5F-2465 | [1] | CUP-BEARING | |
| 3. | 7M-5334 | [1] | CONE-BEARING | |
| 4. | 8E-9571 | [3] | WASHER-HARD (8.8X16X7-MM THK) | |
| 5. | 8K-0066 B | [1] | SHIM (0.112-IN THK) | |
| 6. | 8M-3837 | [1] | PLUG-MAGNETIC (FINAL DRIVE OIL DRAIN) | |
| 7. | 9G-5319 | [1] | SEAL GP-DUO-CONE | |
| 8. | 109-9719 | [6] | WASHER-THRUST | |
| 9. | 110-0551 | [1] | HUB AS | |
| 8K-0079 | [1] | BUSHING-TERMINAL | ||
| 10. | 110-2055 | [1] | COVER AS | |
| 1U-8846 B | [1] | SEALANT-GASKET | ||
| 099-4691 M | [2] | BOLT-LOCKING (M12X1.75X25-MM) | ||
| 109-7848 | [1] | BUTTON | ||
| 11. | 110-4802 | [1] | GEAR-RING (64-TEETH) | |
| 12. | 129-3046 | [1] | CARRIER-PLANETARY | |
| 13. | 135-7742 | [1] | SPINDLE | |
| 14. | 159-8169 | [3] | GEAR-PLANETARY (22-TEETH) | |
| 15. | 163-4526 | [1] | WASHER-THRUST (72.5X94X5-MM THK) | |
| 16. | 163-4527 | [1] | PLATE-BEARING | |
| 17. | 197-4977 | [1] | PLUG AS | |
| 5P-4483 | [1] | PLUG | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 18. | 249-7870 | [1] | GEAR-SUN (17-TEETH) | |
| 19. | 297-3030 | [3] | SHAFT-PLANETARY | |
| 20. | 105-8743 | [3] | BUSHING | |
| 21. | 108-0350 | [1] | RING-RETAINING | |
| 22. | 319-5239 | [1] | WHEEL | |
| 23. | 2D-6511 | [1] | CUP-BEARING | |
| 24. | 2P-8353 | [1] | CONE-BEARING | |
| 25. | 2S-0736 | [10] | WASHER-HARD (17X27X3.5-MM THK) | |
| 26. | 5F-1678 | [1] | SEAL-O-RING | |
| 27. | 5J-1086 | [1] | SEAL-O-RING | |
| 28. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 6D-0692 | [1] | SEAL-O-RING | |
| 30. | 6T-5545 | [3] | DOWEL | |
| 31. | 6V-8097 M | [6] | BOLT (M12X1.75X30-MM) | |
| 32. | 8T-2393 M | [10] | BOLT-SOCKET HEAD (M16X2X60-MM) | |
| 33. | 8T-5091 M | [3] | BOLT (M8X1.25X20-MM) | |
| 34. | 8T-8441 M | [3] | BOLT-SOCKET HEAD (M12X1.75X25-MM) | |
| 35. | 9X-3977 | [1] | SEAL-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP30950487
102-6331: ACTUATOR GP-POWER
102-6331 ACTUATOR GP-POWER
S/N AWH1-UP
PART OF 189-7997, 189-8420 ACTUATOR GP-POWER
S/N AWH1-UP
PART OF 189-7997, 189-8420 ACTUATOR GP-POWER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-3929 | [1] | KIT-SEAL (POWER ACTUATOR) | |
| (INCLUDES COVER TUBE SEAL, GASKET, MOTOR SEAL, O-RING & LIP SEAL) | ||||
| 2. | 114-9981 | [1] | KIT-GEAR (POWER ACTUATOR) | |
| (INCLUDES INTERMEDIATE GEAR & WASHERS) | ||||
| 3. | 114-9990 | [1] | KIT-CLUTCH (POWER ACTUATOR) | |
| (INCLUDES CLUTCH, WASHERS & KEY) | ||||
| 4. | 187-1295 | [1] | KIT-COVER (POWER ACTUATOR) | |
| (INCLUDES COVER-TUBE & HOLDER-TUBE COVER) | ||||
| 5. | 115-0001 | [1] | MOTOR | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP30950488
189-7997: ACTUATOR GP-POWER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-6331 Y | [1] | ACTUATOR GP-POWER | ||
| 119-7933 | [1] | ACTUATOR GP-POWER | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS. & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 9U-2277 | [2] | CLIP AS | ||
| 3K-8782 | [2] | FUSE (10-AMPERE) | ||
| 3W-9225 | [4] | HANDLE AS | ||
| 189-8147 | [1] | HARNESS AS | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS. & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1532 | RECEPTACLE AS-CONNECTOR (6-PIN) | |||
| 8N-1536 | [1] | NUT (1-5/8-18-THD) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 155-2261 | [1] | WEDGE-PLUG LOCK (2-PIN) | ||
| 155-2263 | [1] | WEDGE-PLUG LOCK (6-PIN) | ||
| 155-2269 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS. & WEDGE) | ||||
| 155-2273 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (KIT INCLUDES PLUG AS. & WEDGE) | ||||
| 174-6257 | [1] | HARNESS AS-WIRING (ACTUATOR) | ||
| 155-2261 | [2] | WEDGE-PLUG LOCK (2-PIN) | ||
| 155-2263 | [2] | WEDGE-PLUG LOCK (6-PIN) | ||
| 155-2269 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS. & WEDGE) | ||||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (KIT INCLUDES PLUG AS. & WEDGE) | ||||
| 117-9767 | [1] | HARNESS AS-MOTOR | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS. & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 155-2261 | [1] | WEDGE-PLUG LOCK (2-PIN) | ||
| 155-2269 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS. & WEDGE) | ||||
| 4K-5122 | [2] | HOLDER AS-FUSE | ||
| (EACH INCLUDES) | ||||
| 139-0178 | [1] | CAP | ||
| 5P-0372 | [4] | LOCK PIN | ||
| 3B-4628 | [4] | PIN-COTTER | ||
| 215-4248 | [1] | PLATE | ||
| 178-2527 | [1] | PLATE AS | ||
| 119-6198 | [1] | PLATE-INSTRUCTION | ||
| 7K-1181 | [11] | STRAP-CABLE | ||
| 157-1364 | [1] | SWITCH AS-TOGGLE (CRANKCASE GUARD ACTUATOR) | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS. & WEDGE) | ||||
| 157-1364 | [1] | SWITCH AS-TOGGLE (POWERTRAIN GUARD ACTUATOR) | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS. & WEDGE) | ||||
| 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 119-6199 | [1] | WIRE AS-RELAY PANEL | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP30950489
189-8420: ACTUATOR GP-POWER
189-8420 ACTUATOR GP-POWER
S/N AWH1-UP
PART OF 232-1119, 241-0460 WASTE HANDLING AR
S/N AWH1-UP
PART OF 232-1119, 241-0460 WASTE HANDLING AR
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4628 | [4] | PIN-COTTER | |
| 2. | 3W-9225 | [4] | HANDLE AS | |
| 3. | 5P-0372 | [4] | LOCK PIN | |
| 4. | 7K-1181 | [9] | STRAP-CABLE | |
| 5. | 102-6331 Y | [1] | ACTUATOR GP-POWER (POWER TRAIN GUARD) | |
| 6. | 119-7933 | [1] | ACTUATOR GP-POWER (CRANKCASE GUARD) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 7. | 157-1364 | [2] | SWITCH AS-TOGGLE (CRANKCASE GUARD ACTUATOR) | |
| (EACH INCLUDES) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 167-0506 | [1] | WIRE AS | |
| 9. | 189-8115 | [1] | WIRE AS | |
| 10. | 189-8246 | [1] | PLATE | |
| 11. | 189-8421 | [1] | HARNESS AS-CONTROL (POWER GUARD ACTUATOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 155-2261 | [2] | WEDGE-PLUG LOCK (2-PIN) | ||
| 155-2263 | [2] | WEDGE-PLUG LOCK (6-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 12. | 205-4316 | [1] | HARNESS AS-CONTROL (AXLE OIL COOLER) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 215-4248 | [1] | PLATE | |
| 14. | 130-5300 | [1] | CLIP | |
| 15. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(POWER GUARD ACTUATOR) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 16. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 17. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 980G II :
Truck sale:
53,500
54,500
49,500