AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-7417 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY S/N AWH1-UP PART OF 363-9934 CONTROL & MTG GP-JOYSTICK FIELD REPLACEMENT ORDER @@@@@446-4917@@@@@ 980G II


OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-JOYSTICK
MONITOR GP

WHEEL LOADER 980G II WHEEL LOADER AWH
 980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine SEBP3095 980G II AWH   (1999)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7417 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7418 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE
CONTROL GP-HANDLE
230-9072 CONTROL GP-HANDLE
CONTROL GP-HANDLE
445-9510 CONTROL GP-HANDLE
CONTROL GP-HANDLE
446-4917 CONTROL GP-HANDLE
 

#SEBP30950810
 

206-7417: CONTROL GP-HANDLE

206-7417 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY
S/N AWH1-UP
PART OF 363-9934 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@446-4917@@@@@
i02204087 SEBP3095
2067417 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9B-1117 [2] LOCKWASHER  
2. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
3. 345-7994 [1] CONTROL GP-SWITCH (JOYSTICK)  
4. 208-6081 [1] SLEEVE  
5. 218-7136 E SLEEVE (36-CM)  
6. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
7. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M EACH)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP30950811
 

206-7418: CONTROL GP-HANDLE

206-7418 CONTROL GP-HANDLE
S/N AWH1-UP
PART OF 363-9924 CONTROL & MTG GP-JOYSTICK
i05055990 SEBP3095
2067418 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 218-7136 E SLEEVE (36-CM)  
2. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.02-M EACH)  
3. 208-6081 [1] SLEEVE  
4. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP30950812
 

206-7419: CONTROL GP-HANDLE

206-7419 CONTROL GP-HANDLE -LIFT, TILT, AUTODIG
S/N AWH1-UP
PART OF 220-6102 CONTROL GP-JOYSTICK
i02281871 SEBP3095
2067419 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
2. 9B-1117 [2] LOCKWASHER  
3. 6V-1668 [1] WASHER (6.5X29.1X3-MM THK)  
4. Z [1] SWITCH AS-PUSH BUTTON (HORN)  
4A. Z [1] SWITCH AS-PUSH BUTTON (AUTODIG)  
5. 144-0331 [2] CAP-PUSH BUTTON (YELLOW)  
6. 218-7136 B SLEEVE (36-CM)  
7. 6V-1614 [1] TUBE-HEAT SHRINK (9.52-MM DIA)  
8. 208-6081 [1] SLEEVE  
  B   USE AS REQUIRED
  Z   NOT SERVICED SEPARATELY
 

#SEBP30950813
 

230-9072: CONTROL GP-HANDLE

230-9072 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY, AUTODIG
S/N AWH1-UP
WITHOUT TRIGGER
PART OF 363-9926 CONTROL & MTG GP-JOYSTICK, 208-6060 CONTROL GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@445-9510@@@@@
i01870634 SEBP3095
2309072 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] HANDLE AS  
2. 144-0331 [2] CAP-PUSH BUTTON (YELLOW)  
3. 434-3203 [1] HOUSING GP-LEVER  
3A. Z [1] SWITCH AS-PUSH BUTTON (AUTODIG)  
3B. Z [1] SWITCH AS-PUSH BUTTON (HORN)  
4. 9B-1117 [2] LOCKWASHER  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 208-6081 [1] SLEEVE  
7. 218-7136 E SLEEVE (36-CM)  
8. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M EACH)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#SEBP30950814
 

445-9510: CONTROL GP-HANDLE

445-9510 CONTROL GP-HANDLE
S/N AWH1-UP
PART OF 464-4858 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT FOR @@@@@230-9072@@@@@
i06708050 SEBP3095
4459510 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0331 [2] CAP-PUSH BUTTON (YELLOW)  
2. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M EACH)  
3. 434-3203 [1] HOUSING GP-LEVER  
4. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
5. 9B-1117 [2] LOCKWASHER  
6. 208-6081 [1] SLEEVE  
7. 218-7136 E SLEEVE (36-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP30950815
 

446-4917: CONTROL GP-HANDLE

446-4917 CONTROL GP-HANDLE
S/N AWH1-UP
WITHOUT TRIGGER
PART OF 464-4860 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT FOR @@@@@206-7417@@@@@
i06707492 SEBP3095
4464917 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
2. 208-6081 [1] SLEEVE  
3. 6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M EACH)  
4. 434-3206 [1] CONTROL GP-SWITCH  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 9B-1117 [2] LOCKWASHER  
7. 218-7136 E SLEEVE (36-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP30950816
 

208-6060: CONTROL GP-JOYSTICK

208-6060 CONTROL GP-JOYSTICK -3-FUNCTION WITH AUTODIG
S/N AWH1-UP
PART OF 2Q-8374, 332-9285 CONTROL GP-ELECTROHYDRAULIC
i02272746 SEBP3095
2086060 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
3. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
    (EACH INCLUDES)
  107-1964 [4] SCREW-PAN HEAD (6-19X0.5-IN)  
  033-9139 [1] RING-RETAINING  
4. 230-9072 Y [1] CONTROL GP-HANDLE (LIFT, TILT, AUXILIARY, AUTODIG)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 C [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 C [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 208-6081 [1] SLEEVE  
17. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 175-1529 [1] BOOT  
19. 178-5077 [1] PLATE  
20. [4] SCREW-FLAT HEAD  
21. 363-9926 Y [1] CONTROL & MTG GP-JOYSTICK  
22. 230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
23. 237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950817
 

220-6102: CONTROL GP-JOYSTICK

220-6102 CONTROL GP-JOYSTICK -2-FUNCTION WITH AUTODIG
S/N AWH1-UP
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
i02089875 SEBP3095
2206102 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
3. 206-7419 Y [1] CONTROL GP-HANDLE (LIFT, TILT, AUTODIG)  
4. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
16. 3E-5180 [1] WEDGE-RECEPTACLE LOCK (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950818
 

226-8664: CONTROL GP-JOYSTICK

226-8664 CONTROL GP-JOYSTICK -2-FUNCTION
S/N AWH1-UP
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@363-9934@@@@@
i02138349 SEBP3095
2268664 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
2. 3E-5180 [1] WEDGE-RECEPTACLE LOCK (12-PIN)  
3. 228-0850 [2] DETENT GP-CONTROL (JOYSTICK, LIFT, TILT)  
4. 206-7418 [1] CONTROL GP-HANDLE (LIFT, TILT)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
  208-6081 [1] SLEEVE  
  218-7136 E SLEEVE (36-CM)  
5. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
6. 175-3265 [1] SCREW (8-16X0.63-IN)  
7. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
8. 257-2531 [1] SENSOR GP-POSITION (LIFT)  
9. 257-2532 [1] SENSOR-POSITION (TILT)  
10. 2K-4898 [1] CLAMP-TUBE  
11. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 208-6081 [1] SLEEVE  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP30950819
 

103-5526: CONTROL GP-MONITOR

103-5526 CONTROL GP-MONITOR -BACKLIGHT DIMMER
S/N AWH1-99999
PART OF 195-6255, 207-8617 WIRING GP-CAB
i00089832 SEBP3095
1035526 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
2. [1] BOARD AS  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
 

Information:

Caterpillar Parts SIS Catalog 980G II :

CONTROL GP-ELECTROHYDRAULIC
332-9285 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
2Q-8374 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0209 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
233-0208 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
218-3833 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
213-6015 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
210-9583 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-HANDLE
206-7418 CONTROL GP-HANDLE
CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE
CONTROL GP-HANDLE
230-9072 CONTROL GP-HANDLE
CONTROL GP-HANDLE
445-9510 CONTROL GP-HANDLE
CONTROL GP-HANDLE
446-4917 CONTROL GP-HANDLE
CONTROL GP-JOYSTICK
208-6060 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
220-6102 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
226-8664 CONTROL GP-JOYSTICK

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.