AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-4812 FASTENER GP-FUEL INJ PUMP S/N 55K1-UP PART OF 157-6088 GOVERNOR GP-UNIT INJECTOR 525B WHEEL SKIDDER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL

WHEEL SKIDDER 525B WHEEL SKIDDER 3KZ
 525B Wheel Skidder 3KZ00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3096 525B 3KZ   (1998)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
107-7734 PUMP GP-FUEL INJECTION
 

#SEBP30960110
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 55K1-UP
PART OF 157-6088 GOVERNOR GP-UNIT INJECTOR
i00122408 SEBP3096
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP30960111
 

138-1827: FILTER & LINES GP-SEC FUEL

138-1827 FILTER & LINES GP-SEC FUEL
S/N 55K1-UP
PART OF 148-3017 ENGINE AR
i00509478 SEBP3096
1381827 FILTER & LINES GP-SEC FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0751 [2] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
2. 3L-0594 [1] SPACER (8.7X15.9X15.9-MM THK)  
3. 5P-4961 [2] CLAMP-HOSE  
4. 7E-5189 [1] VALVE AS (FUEL)  
5. 7E-5190 [1] TUBE AS  
6. 7X-2459 [1] ADAPTER-TEE  
7. 8H-1603 [1] CLIP  
8. 9K-6060 [1] CLIP  
9. 129-1102 Y [1] BASE GP-FUEL FILTER  
10. 138-1743 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
11. 141-9297 [1] TUBE AS  
12. 141-9298 [1] TUBE AS  
13. 141-9299 [1] TUBE AS  
14. 149-0247 [1] BRACKET AS  
15. 165-7801 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
16. 141-8275 [2] VALVE-DRAIN (FUEL)  
18. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
19. 3E-4353 [1] WASHER-HARD (11X25X3-MM THK)  
20. 3J-1907 [8] SEAL-O-RING  
21. 3N-3252 [1] SPRING  
22. 5F-7054 [1] SEAL-O-RING  
23. 5P-7813 [1] SEAL-O-RING  
24. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
25. 6V-2315 M [1] BOLT (M6X1X35-MM)  
26. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
27. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
28. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
29. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
30. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
31. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
32. 6V-8214 M [1] BOLT (M6X1X20-MM)  
33. 6V-8397 [6] SEAL-O-RING  
34. 6V-8724 [3] ELBOW  
35. 6V-8781 [1] TEE  
36. 6V-8837 M [1] BOLT (M6X1X16-MM)  
37. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
38. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
39. 8T-0151 [1] ADAPTER  
40. 8T-0276 M [2] BOLT (M8X1.25X45-MM)  
41. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-1350 [1] CLIP  
43. 148-8407 [3] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
44. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
45. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
46. 103-2529 E HOSE (55 CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960112
 

176-5618: FILTER GP-WATER SEP & FUEL

176-5618 FILTER GP-WATER SEP & FUEL
S/N 55K1-UP
PART OF 183-2344, 225-6518 FILTER GP-WATER SEP & FUEL
i01305521 SEBP3096
1765618 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-1642 [1] FILTER AS-WATER SEP & FUEL  
1A. 220-8678 [1] SEAL-RING (WATER SEPARATOR, FUEL)  
2. 343-5527 [1] BOWL AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  8F-7219 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
 

#SEBP30960113
 

183-2344: FILTER GP-WATER SEP & FUEL

183-2344 FILTER GP-WATER SEP & FUEL
S/N 55K1-10999
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01329101 SEBP3096
1832344 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
3A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3B. 7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960114
 

225-6518: FILTER GP-WATER SEP & FUEL

225-6518 FILTER GP-WATER SEP & FUEL
S/N 55K11000-11837
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01804245 SEBP3096
2256518 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
  7E-5346 [2] VALVE AS  
  7F-8607 [1] SEAL-O-RING (18.72MM ID)  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING (8.92MM ID)  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960115
 

225-6518: FILTER GP-WATER SEP & FUEL

225-6518 FILTER GP-WATER SEP & FUEL
S/N 55K11838-UP
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01966523 SEBP3096
2256518 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 137-5541 C [1] PUMP GP-FUEL PRIMING  
  229-3218 [2] VALVE AS  
  061-7539 [1] SEAL-O-RING (18.72MM ID)  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING (8.92MM ID)  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960116
 

133-3062: GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PART OF 154-3703 GOVERNOR GP-UNIT INJECTOR
i00123890 SEBP3096
1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme 1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 129-3897 [1] VALVE  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING (TOLERANCE)  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 4P-8947 [1] RISER  
36. 4P-0737 [1] SHAFT-RISER  
37. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
38. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
39. 7L-3386 [1] SEAL-O-RING  
40. 7C-5884 [1] COVER-OIL SUMP  
41. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7W-5591 [1] SEAT-GOVERNOR SPRING  
46. 7C-3776 [1] PISTON AS  
46A. 4N-6407 [1] SPOOL-DASHPOT  
46B. 4N-6404 [1] RING-RETAINING  
46C. 4N-6406 [1] RING-SPACER  
47. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
48. 7W-8993 [2] WEIGHT  
49. 7C-5541 [2] PLATE  
50. 7W-1440 B [8] SHIM (0.12-MM THK)  
51. 115-1192 [1] SEAL-GOVERNOR HOUSING  
52. 7C-2743 [2] RACE  
53. 7W-5561 [1] BEARING-THRUST  
54. 8C-5061 [1] RING-RETAINING  
55. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
56. 7C-5150 [1] PIN  
57. 117-9099 [1] FLANGE  
58. 9Y-1837 [1] SPRING  
59. 125-8158 [1] SLEEVE-RACK CONTROL  
60. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
61. 5P-9757 [1] SEAL-O-RING  
62. 109-4587 [1] RING-TOLERANCE  
63. 6D-9953 [1] PIN-SPRING  
64. 8T-1460 [2] RING-RETAINING  
65. 108-1612 [1] CLEVIS  
66. 7C-8854 [1] PIN-CLEVIS  
67. 108-1613 [1] PISTON-SERVO  
68. 8C-3312 [1] RING-RETAINING  
69. 114-2897 [1] COVER-FUEL RATIO CONTROL  
70. 7N-2171 [1] RING-RETAINING  
71. 7W-5324 [1] BEARING  
72. 115-2553 [1] VALVE-GOVERNOR SERVO  
73. 100-4390 [1] SPRING  
74. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
75. 129-4284 [1] SEAT-SPRING  
76. 6I-1564 [1] DIAPHRAGM  
77. 114-2899 [1] RETAINER-DIAPHRAGM  
78. 100-4392 [1] SPRING-SERVO  
79. 100-4394 [1] SEAT-SPRING  
80. 8N-5763 [1] SEAL  
81. 8N-5764 [1] PISTON  
82. 100-4393 [1] SPRING-RETURN  
83. 100-4397 [1] BODY-VALVE  
84. 100-5737 M [1] SETSCREW-ADJUSTMENT  
85. 100-5738 M [1] NUT (M6X0.5-THD)  
86. 2M-9780 [2] SEAL-O-RING  
87. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960117
 

154-3703: GOVERNOR GP-UNIT INJECTOR

154-3703 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PART OF 157-6088 GOVERNOR GP-UNIT INJECTOR
i01034238 SEBP3096
1543703 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3062 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 100-4391 [1] SPRING-OIL SIDE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 112-4893 [1] CAM AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960118
 

157-6088: GOVERNOR GP-UNIT INJECTOR

157-6088 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PART OF 156-8288 ENGINE AR-CORE
i01034287 SEBP3096
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  154-3703 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30960119
 

143-1394: LINES GP-FUEL

143-1394 LINES GP-FUEL
S/N 3KZ1-2013
PART OF 143-1239 CHASSIS AR
i01222754 SEBP3096
1431394 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 525B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5788 [1] SPACER (12.52X17.14X50.8-MM THK)  
2. 197-3160 I [1] HOSE AS  
3. 167-1804 I [1] HOSE AS  
4. 149-7738 [1] CLIP (LOOP)  
5. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
7. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
8. 4K-8864 [4] CLIP (LOOP)  
9. 5K-5338 [1] CLIP (LOOP)  
10. 6D-4244 [4] CLIP (LOOP)  
11. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
12. 148-8368 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
13. 148-8365 [1] ELBOW AS  
  8T-6876 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 8T-4178 M [1] BOLT (M10X1.5X90-MM)  
15. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
16. 231-0856 [2] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Fuel Injection Timing - Check
525B and 535B Wheel Skidders
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2006/05/29
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog 525B :

DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9912 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
143-1244 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
198-1845 TURBOCHARGER GP
TURBOCHARGER GP
195-6029 TURBOCHARGER GP
TURBOCHARGER GP
177-1063 TURBOCHARGER GP
FILTER & LINES GP-SEC FUEL
138-1827 FILTER & LINES GP-SEC FUEL
FILTER GP-WATER SEP & FUEL
176-5618 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
183-2344 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
225-6518 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
225-6518 FILTER GP-WATER SEP & FUEL
GOVERNOR GP-UNIT INJECTOR
133-3062 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
154-3703 GOVERNOR GP-UNIT INJECTOR
157-6088 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar 525B
 
Caterpillar 525B
- skidder
CARTER MACHINERY COMPANY, INC.
Caterpillar 525B, bosbouw - skidder, Bosbouw
75.000 
Caterpillar 525B, bosbouw - skidder, Bosbouw

WESTERN STATES EQUIPMENT
 
75.000 
Caterpillar 525B, bosbouw - skidder, Bosbouw

WESTERN STATES EQUIPMENT
Caterpillar 525B, forstwirtschaft - holzrücker, Forstmaschinen
75.000 
Caterpillar 525B, forstwirtschaft - holzrücker, Forstmaschinen
- skidder
WESTERN STATES EQUIPMENT
Caterpillar 525B, Forestry Equipment
24,657 
Caterpillar 525B, Forestry Equipment
- skidder
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.