AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-8794 DRIVE GP-GOV & TRANSFER PUMP S/N 55K1-UP PART OF 133-3062 GOVERNOR GP-UNIT INJECTOR 535B WHEEL SKIDDER


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

WHEEL SKIDDER 535B WHEEL SKIDDER AAE
 535B Wheel Skidder AAE00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3097 535B AAE   (2000)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
133-3062 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
154-3708 GOVERNOR GP-UNIT INJECTOR
164-5470 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP30970110
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 55K1-UP
PART OF 133-3062 GOVERNOR GP-UNIT INJECTOR
i00122334 SEBP3097
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
1A. 101-0768 [1] GEAR AS-DRIVE (44-TEETH)  
  8T-0114 [1] PIN-SPRING  
1B. 7S-6798 [1] SEAL-LIP TYPE  
1C. 7S-5005 [2] DOWEL  
1D. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP30970111
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 55K1-UP
PART OF 164-5470 GOVERNOR GP-UNIT INJECTOR
i00122408 SEBP3097
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP30970112
 

138-1827: FILTER & LINES GP-SEC FUEL

138-1827 FILTER & LINES GP-SEC FUEL
S/N 55K1-UP
PART OF 163-5360 ENGINE AR
i00509478 SEBP3097
1381827 FILTER & LINES GP-SEC FUEL Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0751 [2] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
2. 3L-0594 [1] SPACER (8.7X15.9X15.9-MM THK)  
3. 5P-4961 [2] CLAMP-HOSE  
4. 7E-5189 [1] VALVE AS (FUEL)  
5. 7E-5190 [1] TUBE AS  
6. 7X-2459 [1] ADAPTER-TEE  
7. 8H-1603 [1] CLIP  
8. 9K-6060 [1] CLIP  
9. 129-1102 Y [1] BASE GP-FUEL FILTER  
10. 138-1743 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
11. 141-9297 [1] TUBE AS  
12. 141-9298 [1] TUBE AS  
13. 141-9299 [1] TUBE AS  
14. 149-0247 [1] BRACKET AS  
15. 165-7801 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
16. 141-8275 [2] VALVE-DRAIN (FUEL)  
18. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
19. 3E-4353 [1] WASHER-HARD (11X25X3-MM THK)  
20. 3J-1907 [8] SEAL-O-RING  
21. 3N-3252 [1] SPRING  
22. 5F-7054 [1] SEAL-O-RING  
23. 5P-7813 [1] SEAL-O-RING  
24. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
25. 6V-2315 M [1] BOLT (M6X1X35-MM)  
26. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
27. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
28. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
29. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
30. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
31. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
32. 6V-8214 M [1] BOLT (M6X1X20-MM)  
33. 6V-8397 [6] SEAL-O-RING  
34. 6V-8724 [3] ELBOW  
35. 6V-8781 [1] TEE  
36. 6V-8837 M [1] BOLT (M6X1X16-MM)  
37. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
38. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
39. 8T-0151 [1] ADAPTER  
40. 8T-0276 M [2] BOLT (M8X1.25X45-MM)  
41. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-1350 [1] CLIP  
43. 148-8407 [3] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
44. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
45. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
46. 103-2529 E HOSE (55 CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970113
 

176-5618: FILTER GP-WATER SEP & FUEL

176-5618 FILTER GP-WATER SEP & FUEL
S/N 55K1-UP
PART OF 183-2344, 225-6518 FILTER GP-WATER SEP & FUEL
i01305521 SEBP3097
1765618 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-1642 [1] FILTER AS-WATER SEP & FUEL  
1A. 220-8678 [1] SEAL-RING (WATER SEPARATOR, FUEL)  
2. 343-5527 [1] BOWL AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  8F-7219 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
 

#SEBP30970114
 

183-2344: FILTER GP-WATER SEP & FUEL

183-2344 FILTER GP-WATER SEP & FUEL
S/N 55K1-10999
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01329101 SEBP3097
1832344 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
3A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3B. 7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970115
 

225-6518: FILTER GP-WATER SEP & FUEL

225-6518 FILTER GP-WATER SEP & FUEL
S/N 55K11000-11837
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01804245 SEBP3097
2256518 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
  7E-5346 [2] VALVE AS  
  7F-8607 [1] SEAL-O-RING (18.72MM ID)  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING (8.92MM ID)  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970116
 

225-6518: FILTER GP-WATER SEP & FUEL

225-6518 FILTER GP-WATER SEP & FUEL
S/N 55K11838-UP
PART OF 197-0872 PUMP GP-FUEL PRM & PRIM FILTER
i01966523 SEBP3097
2256518 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 137-5541 C [1] PUMP GP-FUEL PRIMING  
  229-3218 [2] VALVE AS  
  061-7539 [1] SEAL-O-RING (18.72MM ID)  
3. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS  
4. 176-5618 Y [1] FILTER GP-WATER SEP & FUEL  
5. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [4] SEAL-O-RING (8.92MM ID)  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-8002 [4] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970117
 

133-3062: GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PART OF 154-3708 GOVERNOR GP-UNIT INJECTOR
i00123890 SEBP3097
1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme 1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 129-3897 [1] VALVE  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING (TOLERANCE)  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 4P-8947 [1] RISER  
36. 4P-0737 [1] SHAFT-RISER  
37. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
38. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
39. 7L-3386 [1] SEAL-O-RING  
40. 7C-5884 [1] COVER-OIL SUMP  
41. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7W-5591 [1] SEAT-GOVERNOR SPRING  
46. 7C-3776 [1] PISTON AS  
46A. 4N-6407 [1] SPOOL-DASHPOT  
46B. 4N-6404 [1] RING-RETAINING  
46C. 4N-6406 [1] RING-SPACER  
47. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
48. 7W-8993 [2] WEIGHT  
49. 7C-5541 [2] PLATE  
50. 7W-1440 B [8] SHIM (0.12-MM THK)  
51. 115-1192 [1] SEAL-GOVERNOR HOUSING  
52. 7C-2743 [2] RACE  
53. 7W-5561 [1] BEARING-THRUST  
54. 8C-5061 [1] RING-RETAINING  
55. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
56. 7C-5150 [1] PIN  
57. 117-9099 [1] FLANGE  
58. 9Y-1837 [1] SPRING  
59. 125-8158 [1] SLEEVE-RACK CONTROL  
60. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
61. 5P-9757 [1] SEAL-O-RING  
62. 109-4587 [1] RING-TOLERANCE  
63. 6D-9953 [1] PIN-SPRING  
64. 8T-1460 [2] RING-RETAINING  
65. 108-1612 [1] CLEVIS  
66. 7C-8854 [1] PIN-CLEVIS  
67. 108-1613 [1] PISTON-SERVO  
68. 8C-3312 [1] RING-RETAINING  
69. 114-2897 [1] COVER-FUEL RATIO CONTROL  
70. 7N-2171 [1] RING-RETAINING  
71. 7W-5324 [1] BEARING  
72. 115-2553 [1] VALVE-GOVERNOR SERVO  
73. 100-4390 [1] SPRING  
74. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
75. 129-4284 [1] SEAT-SPRING  
76. 6I-1564 [1] DIAPHRAGM  
77. 114-2899 [1] RETAINER-DIAPHRAGM  
78. 100-4392 [1] SPRING-SERVO  
79. 100-4394 [1] SEAT-SPRING  
80. 8N-5763 [1] SEAL  
81. 8N-5764 [1] PISTON  
82. 100-4393 [1] SPRING-RETURN  
83. 100-4397 [1] BODY-VALVE  
84. 100-5737 M [1] SETSCREW-ADJUSTMENT  
85. 100-5738 M [1] NUT (M6X0.5-THD)  
86. 2M-9780 [2] SEAL-O-RING  
87. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970118
 

154-3708: GOVERNOR GP-UNIT INJECTOR

154-3708 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PART OF 164-5470 GOVERNOR GP-UNIT INJECTOR
i01002421 SEBP3097
1543708 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3062 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 165-5675 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30970119
 

164-5470: GOVERNOR GP-UNIT INJECTOR

164-5470 GOVERNOR GP-UNIT INJECTOR
S/N 55K1-UP
PINLESS
PART OF 163-5361 ENGINE AR-CORE
i01002418 SEBP3097
  For full view, you need register

Parts for your 535B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  154-3708 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116, 3126 Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 535B :

CONTROL GP-GOVERNOR
7E-9912 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
143-1244 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
198-1845 TURBOCHARGER GP
TURBOCHARGER GP
195-6029 TURBOCHARGER GP
TURBOCHARGER GP
177-1063 TURBOCHARGER GP
TURBOCHARGER GP
119-2932 TURBOCHARGER GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FILTER & LINES GP-SEC FUEL
138-1827 FILTER & LINES GP-SEC FUEL
FILTER GP-WATER SEP & FUEL
176-5618 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
183-2344 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
225-6518 FILTER GP-WATER SEP & FUEL
FILTER GP-WATER SEP & FUEL
225-6518 FILTER GP-WATER SEP & FUEL
GOVERNOR GP-UNIT INJECTOR
133-3062 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
154-3708 GOVERNOR GP-UNIT INJECTOR

Truck sale:

 
99,000 
Caterpillar 535B, Forestry Equipment
- skidder
N C MACHINERY CO.
Caterpillar 535B, Forestry Equipment
 
Caterpillar 535B, Forestry Equipment
- skidder
MILTON CAT
Caterpillar 535B, Forestry Equipment
29,000 
Caterpillar 535B, Forestry Equipment
- skidder
MILTON CAT
CATERPILLAR 535B 2001
 
CATERPILLAR 535B 2001
- FORESTRY - SKIDDER
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR 535B 2001
 
CATERPILLAR 535B 2001
- FORESTRY - SKIDDER
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.