AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9X-9730 BATTERY GP -DRY S/N 9EP1-UP 12-VOLT PART OF 7L-7872 BATTERY GP AN ATTACHMENT 3412C GENERATOR SET


ELECTRICAL AND STARTING SYSTEM
BATTERY GP
BOX GP

GENERATOR SET 3412C GENERATOR SET 9EP
 3412C Generator Set 9EP00001-UP SEBP3105 3412C 9EP   (1999)

ELECTRICAL AND STARTING SYSTEM

BATTERY GP
BATTERY GP
7L-7871 BATTERY GP
BATTERY GP
7L-7872 BATTERY GP
BATTERY GP
9X-9730 BATTERY GP
MOUNTING GP-BATTERY CHARGER
184-7029 MOUNTING GP-BATTERY CHARGER
MOUNTING GP-BATTERY CHARGER
184-7040 MOUNTING GP-BATTERY CHARGER
SUPPORT GP-BATTERY
168-3237 SUPPORT GP-BATTERY
 

#SEBP31050540
 

9X-9730: BATTERY GP

9X-9730 BATTERY GP -DRY
S/N 9EP1-UP
12-VOLT
PART OF 7L-7872 BATTERY GP
AN ATTACHMENT
i01442030 SEBP3105
9X9730 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-0060 [6] VENT AS  
 

#SEBP31050541
 

169-0228: BOX GP-CONTROL

169-0228 BOX GP-CONTROL
S/N 9EP1-UP
PART OF 169-0226 BOX GP-JUNCTION
AN ATTACHMENT
i01323195 SEBP3105
1690228 BOX GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0281 [1] BOX AS  
  142-2463 [9] INSERT-NUT (M6X1-THD)  
2. 6T-3642 [1] CIRCUIT BREAKER AS (10-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
3. 6T-3645 [1] CIRCUIT BREAKER GP (60-AMPERE)  
4. 200-8577 [1] CIRCUIT BREAKER AS (20-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
5. 5N-9117 [1] ADAPTER  
6. 175-2306 [1] SWITCH AS-MAGNETIC (24-VOLT)(STARTING MOTOR)  
7. 102-8619 Y [1] CONTROL GP-EMCP ELECTRONIC  
8. 185-7161 [2] RELAY AS (24-VOLT)(24-VOLT DC)  
9. 125-3295 M [4] SCREW-PAN HEAD (M2.5X0.45X12-MM)  
10. 2Y-6338 M [4] SCREW (M6X1-THD)  
11. 5C-8312 M [1] NUT (M4X0.7-THD)  
12. 8C-9660 [1] WASHER (4.6X7.9X0.8-MM THK)  
13. 4B-1270 [6] SCREW-MACHINE (8-32X0.75-IN)  
14. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
15. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
16. 5C-2890 M [2] NUT (M6X1-THD)  
17. 169-4446 [1] HARNESS AS-WIRING (CONTROL BOX)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
18. 5N-9072 [1] CLIP  
19. 5N-9067 [1] COLLAR  
20. 169-9016 M [4] NUT (M2.5X0.45-THD)  
21. 169-9012 [8] WASHER-HARD (2.7X6X0.5-MM THK)  
23. 062-5388 [1] LOCKNUT (1-11-1/2-THD)  
24. 225-0547 [5] BLOCK-TERMINAL  
25. 173-5413 [2] CLAMP  
26. 225-0548 [1] COVER  
27. 225-0906 [1] BRIDGE (2-POSITION)  
28. 147-1960 B [1] RAIL  
29. 155-0950 [1] FILM-IDENTIFICATION (GENERATOR CONTROL PANEL)  
30. 7W-9799 [1] FILM-INFORMATION (GENERATOR GROUND)(CONTROL BOX)  
31. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
32. 196-7623 [1] KIT-MARKER (CONTROL BOX)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050542
 

169-0229: BOX GP-CONTROL

169-0229 BOX GP-CONTROL
S/N 9EP1-UP
POWER DISTRIBUTION, ETR
PART OF 169-0227 BOX GP-JUNCTION
AN ATTACHMENT
i01314545 SEBP3105
1690229 BOX GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0281 [1] BOX AS  
  142-2463 [9] INSERT-NUT (M6X1-THD)  
2. 6T-3645 Y [1] CIRCUIT BREAKER GP (60-AMPERE)  
3. 200-8577 [1] CIRCUIT BREAKER AS (20-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5N-9117 [1] ADAPTER  
5. 175-2306 [1] SWITCH AS-MAGNETIC (24-VOLT)(STARTING MOTOR)  
6. 185-7236 [2] RELAY AS (24-VOLT)  
7. 5L-6688 [2] BUTTON-PLUG  
8. 147-1960 B [1] RAIL  
9. 173-5413 [2] CLAMP  
10. 3E-0355 [1] BLOCK-FUSE  
11. 200-6265 [1] FUSE (4-AMPERE)  
12. 125-3295 M [4] SCREW-PAN HEAD (M2.5X0.45X12-MM)  
13. 2Y-6338 M [4] SCREW (M6X1-THD)  
14. 5C-8312 M [1] NUT (M4X0.7-THD)  
15. 8C-9660 [1] WASHER (4.6X7.9X0.8-MM THK)  
16. 4B-1270 [4] SCREW-MACHINE (8-32X0.75-IN)  
17. 169-4448 [1] HARNESS AS (CONTROL BOX)  
18. 5N-9072 [1] CLIP  
19. 5N-9067 [1] COLLAR  
20. 169-9016 M [4] NUT (M2.5X0.45-THD)  
21. 169-9012 [8] WASHER-HARD (2.7X6X0.5-MM THK)  
23. 062-5388 [1] LOCKNUT (1-11-1/2-THD)  
24. 225-0547 [4] BLOCK-TERMINAL  
25. 225-0548 [1] COVER  
26. 225-0906 [1] BRIDGE (2-POSITION)  
27. 155-0950 [1] FILM-IDENTIFICATION (GENERATOR CONTROL PANEL)  
28. 5C-2890 M [2] NUT (M6X1-THD)  
29. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
30. 7W-9799 [1] FILM-INFORMATION (GENERATOR GROUND)(CONTROL BOX)  
31. 196-7626 [1] KIT-MARKER (CONTROL BOX)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050543
 

170-8385: BOX GP-CONTROL

170-8385 BOX GP-CONTROL
S/N 9EP1-UP
PEEC
PART OF 169-4514 BOX GP-JUNCTION
AN ATTACHMENT
i01317392 SEBP3105
1708385 BOX GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0281 [1] BOX AS  
  142-2463 [9] INSERT-NUT (M6X1-THD)  
2. 6T-3645 [1] CIRCUIT BREAKER GP (60-AMPERE)  
3. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5N-9117 [1] ADAPTER  
5. 175-2306 [1] SWITCH AS-MAGNETIC (24-VOLT)(STARTING MOTOR)  
6. 196-7624 [1] KIT-MARKER (JUNCTION BOX)  
7. 5L-6688 [2] BUTTON-PLUG  
8. 1G-6420 [2] SPRING (HOLD DOWN)  
9. 2Y-6338 M [4] SCREW (M6X1-THD)  
10. 5C-8312 M [1] NUT (M4X0.7-THD)  
11. 8C-9660 [1] WASHER (4.6X7.9X0.8-MM THK)  
12. 4B-1270 [4] SCREW-MACHINE (8-32X0.75-IN)  
13. 169-4447 [1] HARNESS AS-WIRING (JUNCTION BOX)  
14. 166-0391 [2] RELAY AS (24-VOLT)  
15. 115-7948 [2] SOCKET-RELAY  
16. 5N-9072 [1] CLIP  
17. 5N-9067 [1] COLLAR  
18. 6D-5801 [2] LOCKNUT (8-32-THD)  
19. 225-0547 [3] BLOCK-TERMINAL  
20. 173-5413 [2] CLAMP  
21. 225-0548 [1] COVER  
22. 147-1960 B [1] RAIL  
23. 155-0950 [1] FILM-IDENTIFICATION (GENERATOR CONTROL PANEL)  
24. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
25. 5C-2890 M [2] NUT (M6X1-THD)  
26. 062-5388 [1] LOCKNUT (1-11-1/2-THD)  
27. 225-0906 [1] BRIDGE (2-POSITION)  
28. 7W-9799 [1] FILM-INFORMATION (GENERATOR GROUND)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31050544
 

169-0247: BOX GP-EXTENSION TERMINAL

169-0247 BOX GP-EXTENSION TERMINAL
S/N 9EP1-971
AN ATTACHMENT
i01314634 SEBP3105
1690247 BOX GP-EXTENSION TERMINAL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-4238 [1] BOX AS  
  3E-4304 M [16] INSERT-THREADED (M6X1-THD)  
  180-3748 M [23] INSERT-THREADED (M8X1.25-THD)  
2. 169-0249 Y [1] PANEL GP-CONTROL (AC)(AC)  
3. 169-0250 Y [1] PANEL GP-CONTROL (DC)(DC)  
4. 202-8001 Y [1] BAR GP-GROUND  
5. 190-2550 [1] BLOCK-TERMINAL (GROUND)  
6. 190-2551 [44] BLOCK-TERMINAL (600-VOLT, 20-AMPERE)  
7. 166-6155 B [1] DUCT-WIRE  
8. 7X-3332 M [2] SCREW-HEX FLANGE (M4X0.7X8-MM)  
9. 5C-9553 M [8] BOLT (M6X1X16-MM)  
10. 6V-9491 M [8] SCREW-MACHINE (M4X0.7X20-MM)  
11. 8T-7961 M [8] LOCKNUT (M4X0.7-THD)  
12. 8C-9660 [8] WASHER (4.6X7.9X0.8-MM THK)  
13. 9X-8256 [24] WASHER (6.6X12X2-MM THK)  
14. 8C-6433 M [8] SCREW (M6X1X30-MM)  
15. 190-2552 [5] BLOCK-TERMINAL (600-VOLT, 30-AMPERE)  
16. 061-8844 [1] GROMMET  
17. 169-4449 Y [1] HARNESS AS-BOX (70-PIN)  
18. 3E-6600 BE SEAL  
19. 196-7751 [1] KIT-MARKER (TERMINAL)  
20. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
21. 9X-9675 [3] BRACKET-END  
22. 190-2561 [2] COVER-END  
23. 188-0658 [1] HARNESS AS (MARSHALLING BOX)  
24. 155-0935 [1] FILM-INFORMATION (ELECTRIC COMPONENT IDENTIFY)  
25. 200-8376 [1] FILM-INFORMATION (REPLACEMENT FUSE CHART)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050545
 

169-0247: BOX GP-EXTENSION TERMINAL

169-0247 BOX GP-EXTENSION TERMINAL
S/N 9EP972-UP
Type 1
AN ATTACHMENT
i01570694 SEBP3105
1690247 BOX GP-EXTENSION TERMINAL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-4479 C [1] BOX AS  
  3E-4304 M [16] INSERT-THREADED (M6X1-THD)  
  180-3748 M [27] INSERT-THREADED (M8X1.25-THD)  
  197-7426 M [9] INSERT-THREADED (M4X0.7-THD)  
2. 169-0249 Y [1] PANEL GP-CONTROL (AC)(AC)  
3. 169-0250 Y [1] PANEL GP-CONTROL (DC)(DC)  
4. 199-6173 CY [1] BAR GP-GROUND  
5. 225-0755 C [1] BLOCK-TERMINAL (GROUND)  
6. 225-0547 C [46] BLOCK-TERMINAL  
7. 207-8643 BJ DUCT-WIRE  
8. 195-2637 [2] SCREW (8-32X0.5-IN)  
9. 5C-9553 M [8] BOLT (M6X1X16-MM)  
10. 6V-9491 M [8] SCREW-MACHINE (M4X0.7X20-MM)  
11. 5C-8312 CM [11] NUT (M4X0.7-THD)  
12. 3B-4501 C [8] LOCKWASHER  
13. 9X-8256 [16] WASHER (6.6X12X2-MM THK)  
14. 8C-6433 M [8] SCREW (M6X1X30-MM)  
15. 225-5522 C [5] BLOCK-TERMINAL (800-VOLT, 41-AMPERE)  
16. 061-8844 [2] GROMMET  
17. 169-4449 Y [1] HARNESS AS-BOX (70-PIN)  
18A. 3E-6600 E SEAL (143-CM)  
18B. 3E-6600 E SEAL (155-CM)  
18C. 3E-6600 E SEAL (54-CM)  
19. 196-7751 [1] KIT-MARKER (EXTENSION TERMINAL BOX)  
20. 155-0935 [1] FILM-INFORMATION (ELECTRIC COMPONENT IDENTIFY)  
21. 173-5413 [3] CLAMP  
22. 225-0548 [2] COVER  
23. 220-1805 [1] HARNESS AS-BOX (DC)  
  9X-7148 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
24. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
25. 200-8376 [1] FILM-INFORMATION (REPLACEMENT FUSE CHART)  
26. 225-5545 C [1] BRIDGE (2-POSITION)  
27. 225-0906 C [3] BRIDGE (2-POSITION)  
28. 202-8729 C [1] FILM-INFORMATION (OPTIONAL GROUND CONDUCTORS)  
30. 220-1804 [1] HARNESS AS-BOX (AC)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
31. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE MILLIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050546
 

169-0247: BOX GP-EXTENSION TERMINAL

169-0247 BOX GP-EXTENSION TERMINAL
S/N 9EP972-UP
Type 2
AN ATTACHMENT
i02006985 SEBP3105
1690247 BOX GP-EXTENSION TERMINAL Parts scheme 1690247 BOX GP-EXTENSION TERMINAL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-4479 [1] BOX AS  
  3E-4304 M [16] INSERT-THREADED (M6X1-THD)  
  180-3748 M [27] INSERT-THREADED (M8X1.25-THD)  
  197-7426 M [9] INSERT-THREADED (M4X0.7-THD)  
2. 169-0249 Y [1] PANEL GP-CONTROL (AC)(AC)  
3. 169-0250 Y [1] PANEL GP-CONTROL (DC)(DC)  
4. 199-6173 Y [1] BAR GP-GROUND  
5. 237-2922 CY [1] CONNECTION GP-TERMINAL STRIP  
7. 217-7165 BCJ DUCT-WIRE (350-MM)  
8. 195-2637 [2] SCREW (8-32X0.5-IN)  
9. 5C-9553 M [8] BOLT (M6X1X16-MM)  
10. 6V-9491 M [8] SCREW-MACHINE (M4X0.7X20-MM)  
11. 5C-8312 M [11] NUT (M4X0.7-THD)  
12. 3B-4501 [11] LOCKWASHER  
13. 9X-8256 [16] WASHER (6.6X12X2-MM THK)  
14. 8C-6433 M [8] SCREW (M6X1X30-MM)  
15. 220-1804 [1] HARNESS AS-BOX (AC)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
16. 061-8844 [2] GROMMET  
17. 169-4449 Y [1] HARNESS AS-BOX (70-PIN)  
18A. 3E-6600 E SEAL (143-CM)  
18B. 3E-6600 E SEAL (155-CM)  
18C. 3E-6600 E SEAL (54-CM)  
19. 202-8729 [1] FILM-INFORMATION (OPTIONAL GROUND CONDUCTORS)  
20. 155-0935 [1] FILM-INFORMATION (ELECTRIC COMPONENT IDENTIFY)  
21. 200-8376 [1] FILM-INFORMATION (REPLACEMENT FUSE CHART)  
22. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
23. 220-1805 [1] HARNESS AS-BOX (DC)  
  9X-7148 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
24. 2D-6235 C [2] LOCKNUT (1/4-20-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE MILIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050547
 

169-4522: BOX GP-EXTENSION TERMINAL

169-4522 BOX GP-EXTENSION TERMINAL
S/N 9EP1-UP
FOR USE WITH SIDE BREAKER BOX (SINGLE OR DUAL BREAKER) OPTION
AN ATTACHMENT
i01317434 SEBP3105
1694522 BOX GP-EXTENSION TERMINAL Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-4526 [1] BOX AS  
1A. 3E-4304 M [8] INSERT-THREADED (M6X1-THD)  
1B. 180-3748 M [40] INSERT-THREADED (M8X1.25-THD)  
1C. 197-7426 M [6] INSERT-THREADED (M4X0.7-THD)  
2. 174-9194 M [8] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP31050548
 

169-0226: BOX GP-JUNCTION

169-0226 BOX GP-JUNCTION
S/N 9EP1-UP
POWER DISTRIBUTION, ETS
AN ATTACHMENT
i01313804 SEBP3105
1690226 BOX GP-JUNCTION Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0228 Y [1] BOX GP-CONTROL  
2. 154-9676 [1] COVER AS  
3. 095-0742 M [4] SCREW-MACHINE (M6X1X16-MM)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
5. 105-3482 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 5C-8312 M [1] NUT (M4X0.7-THD)  
8. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31050549
 

169-0227: BOX GP-JUNCTION

169-0227 BOX GP-JUNCTION
S/N 9EP1-UP
POWER DISTRIBUTION, ETR
AN ATTACHMENT
i01314507 SEBP3105
1690227 BOX GP-JUNCTION Parts scheme
  For full view, you need register

Parts for your 3412C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0229 Y [1] BOX GP-CONTROL  
2. 169-0284 [1] COVER AS  
3. 095-0742 M [4] SCREW-MACHINE (M6X1X16-MM)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
5. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 5C-8312 M [1] NUT (M4X0.7-THD)  
8. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Recommendations for Battery Charging for Genset Usage {1401, 1406}
2015/04/03
Special Instruction
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Technical Information Bulletin
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
Troubleshooting
Charging System
EMCP3

Caterpillar Parts SIS Catalog 3412C :

BATTERY GP
7L-7872 BATTERY GP
BATTERY GP
7L-7871 BATTERY GP
BATTERY GP
160-5447 BATTERY GP
BATTERY CHARGER
7C-9141 BATTERY CHARGER
119-8978 BATTERY CHARGER
BATTERY CHARGER
118-4304 BATTERY CHARGER
BATTERY CHARGER
114-6486 BATTERY CHARGER
BATTERY CHARGER
111-6138 BATTERY CHARGER
BOX GP-CONTROL
169-0228 BOX GP-CONTROL
BOX GP-CONTROL
169-0229 BOX GP-CONTROL
BOX GP-CONTROL
170-8385 BOX GP-CONTROL
BOX GP-EXTENSION TERMINAL
169-0247 BOX GP-EXTENSION TERMINAL
BOX GP-EXTENSION TERMINAL
169-0247 BOX GP-EXTENSION TERMINAL
BOX GP-EXTENSION TERMINAL
169-0247 BOX GP-EXTENSION TERMINAL
BOX GP-EXTENSION TERMINAL
169-4522 BOX GP-EXTENSION TERMINAL
BOX GP-JUNCTION
169-0226 BOX GP-JUNCTION

Truck sale:

Caterpillar 3412C
 
Caterpillar 3412C
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
95,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
145,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
74,900 
Caterpillar 3412CEP, Stationary Generator Sets, Construction


Caterpillar 3412C
 
Caterpillar 3412C
- Marine Propulsion / Auxiliary Engines
HAWTHORNE POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.