AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B Marine-Generator Set Engine Military 9PL00001-UP AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



GEN SET ENGINE 3406B GEN SET ENGINE 9PL
 3406B Marine-Generator Set Engine Military 9PL00001-UP SEBP3113 3406B 9PL   (1993)

Parts group 3406B:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GP-WATER
4N-4077 AFTERCOOLER GP-WATER
4N-4077 AFTERCOOLER GP-WATER
AIR CLEANER GP
ADAPTER GP-AIR CLEANER
4N-5498 ADAPTER GP-AIR CLEANER
4N-5498 ADAPTER GP-AIR CLEANER
PROVIDES A 6 INCH O.D. ADAPTER FOR PRECLEANER INSTALLATION OR CONNECTION TO REMOTE AIR SUPPLY
PART OF 109-3829 GENERAL AR
CANNOT BE USED WITH TWO STAGE AIR CLEANER
AIR CLEANER GP
4N-0879 AIR CLEANER GP
4N-0879 AIR CLEANER GP
PART OF 109-3829 GENERAL AR
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD & CENTER MOUNTED TURBOCHARGER
AIR CLEANER GP
8N-5766 AIR CLEANER GP
8N-5766 AIR CLEANER GP
4N7808 SOOT FILTER IS AVAILABLE
PART OF 4N-0879 AIR CLEANER GP
LINES GP-AIR
LINES GP-AIR
4N-4078 LINES GP-AIR
4N-4078 LINES GP-AIR
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
4N-0691 MANIFOLD GP-EXHAUST
4N-0691 MANIFOLD GP-EXHAUST
SHUTOFF GP-AIR
SHUTOFF GP-AIR
5N-2060 SHUTOFF GP-AIR
5N-2060 SHUTOFF GP-AIR
PART OF 121-3376 STARTING GP-AUTOMATIC
Type 1
FOR USE WITH WATERCOOLED MANIFOLD
CANNOT BE USED WITH LOW SPEED ENGINE
SHUTOFF GP-AIR
5N-2060 SHUTOFF GP-AIR
5N-2060 SHUTOFF GP-AIR
PART OF 121-3376 STARTING GP-AUTOMATIC
Type 2
FOR USE WITH WATERCOOLED MANIFOLD
CANNOT BE USED WITH LOW SPEED ENGINE
TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
1W-1814 CARTRIDGE GP-TURBOCHARGER
1W-1814 CARTRIDGE GP-TURBOCHARGER
PART OF 9Y-7630 TURBOCHARGER GP
COVER GP-TURBOCHARGER DRAIN
4N-5489 COVER GP-TURBOCHARGER DRAIN
4N-5489 COVER GP-TURBOCHARGER DRAIN
TURBOCHARGER GP
9Y-7629 TURBOCHARGER GP
9Y-7629 TURBOCHARGER GP
TURBOCHARGER GP
9Y-7630 TURBOCHARGER GP
9Y-7630 TURBOCHARGER GP
PART OF 9Y-7629 TURBOCHARGER GP
LINES GP-EXHAUST
ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
S/N 9PL1-17
152-MM (6-INCH)
PART OF 109-3829 GENERAL AR
CANNOT BE USED WITH EXHAUST RESTRICTOR
ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
S/N 9PL18-UP
152-MM (6-INCH)
PART OF 109-3829 GENERAL AR
CANNOT BE USED WITH EXHAUST RESTRICTOR
FLANGE GP-EXHAUST
2W-7851 FLANGE GP-EXHAUST
2W-7851 FLANGE GP-EXHAUST
152-MM (6-INCH) DIAMETER PIPE
PART OF 109-3829 GENERAL AR
FOR USE WITH EXHAUST PIPE AND ELBOW
CANNOT BE USED WITH WATERCOOLED EXHAUST ELBOW

Information:

(For parts list, see above)

Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Magazine
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
8N-4617 Air Cleaner Clamp Kit Available {1051}
1998/02/09
Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/01
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
New Thicker Exhaust Manifold Gasket Used{1059}
1995/09/01
Service Magazine
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Special Instruction
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.