AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B Marine-Generator Set Engine Military 9PL00001-UP BASIC ENGINE Caterpillar SIS



GEN SET ENGINE 3406B GEN SET ENGINE 9PL
 3406B Marine-Generator Set Engine Military 9PL00001-UP SEBP3113 3406B 9PL   (1993)

Parts group 3406B:

  For full view, you need register
BASIC ENGINE
BARRING GP
BARRING GP
5R-7425 BARRING GP
5R-7425 BARRING GP -LH
PART OF 109-3829 GENERAL AR
CAMSHAFT GP
CAMSHAFT GP
7W-3798 CAMSHAFT GP
7W-3798 CAMSHAFT GP -SINGLE
COUPLING GP
COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
PART OF 109-3829 GENERAL AR
FOR USE WITH 440 FRAME GENERATORS
CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
430-2593 CRANKSHAFT AS
PART OF 4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
Type 1
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
Type 2
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
PART OF 4N-0741 CRANKSHAFT GP
ALSO FIELD INSTALLATION
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
S/N 9PL14-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK AS
202-1259 CYLINDER BLOCK AS
202-1259 CYLINDER BLOCK AS
PART OF 108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
S/N 9PL14-UP
PART OF 202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 9PL1-13
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 9PL14-UP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@, @@@@@ 7E-4697@@@@@
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
PART OF 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
S/N 9PL14-UP
PART OF 7E-4697, 8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
S/N 9PL17-UP
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
S/N 9PL1-13
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
S/N 9PL14-16
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
CYLINDER HEAD GP
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
PART OF 4W-2436 CYLINDER HEAD GP
DAMPER GP
DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4 GROOVE PULLEY
GUARD GP-DAMPER
2W-7257 GUARD GP-DAMPER
2W-7257 GUARD GP-DAMPER
S/N 9PL13-UP
FOR USE WHEN NO ACCESSORY IS DRIVEN FROM FRONT OF CRANKSHAFT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
1N-3970 DRIVE GP-ACCESSORY
1N-3970 DRIVE GP-ACCESSORY
LEFT HAND
PART OF 109-3829 GENERAL AR
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
FLYWHEEL GP
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N-3060 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4N-4792 COVER GP-FLYWHEEL HOUSING
4N-4792 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
120-6696 HOUSING GP-FLYWHEEL
120-6696 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE -FRONT
PAN GP-OIL
PAN GP-OIL
4N-0756 PAN GP-OIL
4N-0756 PAN GP-OIL -ENGINE
PISTON & ROD GP
PISTON & ROD GP
7E-0491 PISTON & ROD GP
7E-0491 PISTON & ROD GP
S/N 9PL17-UP
14.5:1 RATIO
PISTON & ROD GP
7N-3516 PISTON & ROD GP
7N-3516 PISTON & ROD GP
S/N 9PL1-16
14.5 : 1 RATIO
PULLEY GP
DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4 GROOVE PULLEY
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
109-4638 COVER GP-VALVE MECHANISM
109-4638 COVER GP-VALVE MECHANISM
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N-1045 ROCKER ARM GP
PART OF 4W-2461 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP -ENGINE

Information:

(For parts list, see above)

Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New 8T2998 Lubricant Available
1986/03/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2007/07/02
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
2010/09/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Liner Flange Breakage
Liner Flange Breakage
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Engine News
Damper Requirements For Remanufactured Short Block
1993/08/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material {1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Special Instruction
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Piston Pin Retainer Used{1225}
1991/10/14
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
3400 Engine Major Component Performance Guide Available
1987/07/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/09/14
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Piston Pin Retainer Used
1991/10/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
2010/09/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Piston Pin Retainer Used{1225}
1991/10/14
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.