BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN
BASIC ENGINE
CYLINDER BLOCK GP#SEBP31240020
221-4480: CYLINDER BLOCK GP
Parts for your 322C EXCAVATOR:
CATERPILLAR SIS#SEBP31240021
221-4481: CYLINDER BLOCK GP
Parts for your 322C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 221-4480 Y | [1] | CYLINDER BLOCK GP | |
2. | 2M-6471 | [2] | PLUG-CUP | |
3. | 3H-5552 | [1] | PLUG-CUP | |
4. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
5. | 2M-9780 | [1] | SEAL-O-RING | |
6. | 216-5586 | [1] | BUSHING (CAMSHAFT) | |
7. | 2W-7213 | [6] | BUSHING (CAMSHAFT) | |
107-7604 ABF | SLEEVE-CYLINDER | |||
(FOR SALVAGE OF CYLINDER BORE IN BLOCK) | ||||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
Y | SEPARATE ILLUSTRATION |
#SEBP31240022
140-7373: CYLINDER HEAD AS
Parts for your 322C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9Y-8848 | [12] | GUIDE-VALVE | |
2. | 9S-8003 | [3] | PLUG (1/2-20-THD) | |
3. | 1J-9671 | [3] | SEAL-O-RING | |
4. | 2M-6471 | [2] | PLUG-CUP | |
5. | 119-3036 | [12] | SEAL-VALVE STEM | |
6. | 190-9066 Y | [1] | CYLINDER HEAD AS | |
7. | 3J-7354 | [1] | SEAL-O-RING | |
8. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
Y | SEPARATE ILLUSTRATION |
#SEBP31240023
190-9066: CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
S/N 3AK1083-UP
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@140-7373@@@@@
S/N 3AK1083-UP
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@140-7373@@@@@
Parts for your 322C EXCAVATOR:
CATERPILLAR SIS#SEBP31240024
140-7370: CYLINDER HEAD GP
Parts for your 322C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1J-9671 | [3] | SEAL-O-RING | |
2. | 140-7371 Y | [1] | CYLINDER HEAD GP | |
3. | 3J-7354 | [1] | SEAL-O-RING | |
4. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
5. | 2M-6471 | [2] | PLUG-CUP | |
6. | 205-1293 | [1] | GASKET-CYLINDER HEAD | |
7. | 8T-5030 M | [6] | BOLT (M10X1.5X120-MM) | |
8. | 9S-8003 | [3] | PLUG (1/2-20-THD) | |
9. | 127-4836 M | [14] | BOLT (M20X2.5X160-MM) | |
8T-3282 | [14] | WASHER-HARD (22X35X3.5-MM THK) | ||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP31240025
140-7371: CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
S/N 3AK1083-UP
PART OF 140-7370, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
S/N 3AK1083-UP
PART OF 140-7370, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
Parts for your 322C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 190-9066 Y | [1] | CYLINDER HEAD AS | |
2. | 161-4280 | [6] | VALVE-INLET | |
3. | 136-0819 | [6] | VALVE-EXHAUST | |
4. | 1W-2715 | [24] | LOCK-RETAINER | |
5. | 7E-7779 | [12] | RETAINER-SPRING | |
6. | 7C-4273 | [12] | SPRING-VALVE | |
7. | 9Y-8848 | [12] | GUIDE-VALVE | |
8. | 119-3036 | [12] | SEAL-VALVE STEM | |
Y | SEPARATE ILLUSTRATION |
#SEBP31240026
160-5130: CYLINDER HEAD GP
#SEBP31240027
133-5056: DAMPER & PULLEY GP
#SEBP31240028
208-3725: DAMPER GP
#SEBP31240029
7C-0044: DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
S/N 3AK1083-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 168-8660 ENGINE AR, 211-0750 ENGINE AR-COMPLETE
S/N 3AK1083-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 168-8660 ENGINE AR, 211-0750 ENGINE AR-COMPLETE
Parts for your 322C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7C-8365 | [1] | DRIVE GP-FAN | |
1A. | 5S-9062 | [1] | SPACER (35.032X50.8X15.88-MM THK) | |
1B. | 4W-1203 | [2] | CUP-BEARING | |
1C. | 4W-1204 | [2] | CONE-BEARING | |
1D. | 4W-2042 | [1] | SPACER (35.3X45.5X38.331-MM THK) | |
1E. | 6V-8004 M | [1] | BOLT (M12X1.75X120-MM) | |
1F. | 6V-9748 | [1] | SEAL-LIP TYPE | |
1G. | 7C-8366 | [1] | BRACKET AS | |
1H. | 7C-8369 | [1] | HUB | |
1J. | 7C-8370 | [1] | CAP-DUST | |
1K. | 7C-8634 | [1] | PLATE | |
2. | 6V-4249 M | [4] | BOLT (M10X1.5X50-MM) | |
M | METRIC PART |
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Specifications
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines