AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

147-9592 PISTON & ROD GP S/N 3AK1083-UP 17:1 RATIO PART OF 168-8661 ENGINE AR-CORE Type 1 322C EXCAVATOR


BASIC ENGINE
PISTON & ROD GP
CYLINDER BLOCK GP
PULLEY GP
DRIVE GP-FAN
VALVE MECHANISM GP
CRANKSHAFT GP
LUBRICATION SYSTEM
BREATHER GP

EXCAVATOR 322C EXCAVATOR BKM
 322C & 322C L Excavators BKM00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3124 322C BKM   (2000)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
147-9592 PISTON & ROD GP
PISTON & ROD GP
147-9592 PISTON & ROD GP
 

#SEBP31240040
 

147-9592: PISTON & ROD GP

147-9592 PISTON & ROD GP
S/N 3AK1083-UP
17:1 RATIO
PART OF 168-8661 ENGINE AR-CORE
Type 1
i01342261 SEBP3124
1479592 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-4983 [1] CROWN AS-PISTON  
2. 132-5246 [1] RING-PISTON (TOP)  
3. 197-9277 [1] RING-PISTON (INTERMEDIATE)  
4. 107-7566 [1] RING-PISTON (OIL CONTROL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 168-7226 [1] PIN-PISTON  
7. 2W-9128 [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING (EYE END)  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD (7/16-20-THD)  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 A [1] BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 A [1] BEARING-CONNECTING ROD (0.5-MM US)  
12. 187-1513 [1] SKIRT-PISTON  
13. 135-5970 [1] TUBE AS  
14. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  A   NOT PART OF THIS GROUP
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31240041
 

147-9592: PISTON & ROD GP

147-9592 PISTON & ROD GP
S/N 3AK1083-UP
17:1 RATIO
PART OF 168-8661 ENGINE AR-CORE
Type 2
i01816871 SEBP3124
1479592 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 393-8986 [1] CROWN AS-PISTON  
2. 197-9386 [1] RING-PISTON (TOP)  
3. 197-9277 [1] RING-PISTON (INTERMEDIATE)  
4. 197-9354 [1] RING-PISTON (OIL CONTROL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 525-0480 [1] PIN-PISTON  
7. 213-3193 [1] ROD AS-CONNECTING (NON-DRILLED)  
7A. 2W-0027 [1] BEARING (EYE END)  
7B. 229-6266 M [2] BOLT (M11X1.25X65-MM)  
8. 224-6638 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 AB BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 AB BEARING-CONNECTING ROD (0.5-MM US)  
9. 238-2726 [1] SKIRT-PISTON  
10. 135-5970 [1] TUBE AS (OIL JET)  
11. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31240042
 

156-0228: PLUG GP-CYLINDER BLOCK

156-0228 PLUG GP-CYLINDER BLOCK
S/N 3AK1083-UP
PART OF 168-8660 ENGINE AR, 211-0750 ENGINE AR-COMPLETE
i01339184 SEBP3124
1560228 PLUG GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [2] PLUG (1-1/16-12-THD)  
2. 3D-2824 [2] SEAL-O-RING  
3. 9S-8005 [1] PLUG (3/4-16-THD)  
4. 3K-0360 [1] SEAL-O-RING  
5. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [1] BOLT (M12X1.75X20-MM)  
  M   METRIC PART
 

#SEBP31240043
 

101-0427: PULLEY GP

101-0427 PULLEY GP
S/N 3AK1083-1428
PART OF 168-8660 ENGINE AR
i01409200 SEBP3124
1010427 PULLEY GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-3689 [1] PULLEY-FAN DRIVE  
2. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
3. 6I-0771 [1] PULLEY  
4. 4N-6373 [1] V-BELT SET (INCLUDES 2-BELTS)  
  M   METRIC PART
 

#SEBP31240044
 

208-3727: PULLEY GP

208-3727 PULLEY GP
S/N 3AK1429-UP
PART OF 211-0750 ENGINE AR-COMPLETE
i01597184 SEBP3124
2083727 PULLEY GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6640 [1] V-BELT SET (INCLUDES 2-BELTS)  
2. 208-3728 [1] PULLEY  
3. 6I-4084 [1] PULLEY-FAN DRIVE  
4. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP31240045
 

4W-5429: PULLEY GP-CRANKSHAFT

4W-5429 PULLEY GP-CRANKSHAFT
S/N 3AK1083-UP
PART OF 168-8660 ENGINE AR, 211-0750 ENGINE AR-COMPLETE
i00379657 SEBP3124
4W5429 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3773 [1] PULLEY-CRANKSHAFT  
2. 8T-3666 M [4] BOLT (M14X2X60-MM)  
3. 2W-7381 [1] PLATE-CLAMP  
  M   METRIC PART
 

#SEBP31240046
 

205-6733: PULLEY GP-FAN & ALT DRIVE

205-6733 PULLEY GP-FAN & ALT DRIVE
S/N BKM243-UP; BLP180-UP
PART OF 204-3851 COOLING AR
AN ATTACHMENT
i01590872 SEBP3124
2056733 PULLEY GP-FAN & ALT DRIVE Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6373 [1] V-BELT SET (INCLUDES 2-BELTS)  
2. 6I-4083 [1] PULLEY  
3. 112-3689 [1] PULLEY-FAN DRIVE  
 

#SEBP31240047
 

107-7722: ROCKER ARM GP

107-7722 ROCKER ARM GP
S/N 3AK1083-UP
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
i00474426 SEBP3124
1077722 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7524 M [2] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
2. 2Y-5829 M [2] NUT (M10X1.5-THD)  
3. 4P-7790 [1] SHAFT AS-ARM  
3A. 2D-6642 [1] BALL  
3B. 7M-5130 [1] PIN-SPRING  
3C. 7W-4137 [1] SHAFT AS  
3D. 0L-1026 [1] PLUG-CUP  
4. 9Y-8534 [1] SUPPORT-SHAFT  
5. 105-1776 [1] ROCKER ARM AS (UNIT INJECTOR)  
  7W-3980 [1] BUSHING  
  7W-3981 [1] SOCKET-ARM  
6. 7W-4117 M [1] NUT (M12X1.25-THD)  
7. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
8. 7W-3983 [1] RING-RETAINING  
9. 9Y-1582 [1] BUTTON-ARM  
10. 6I-0924 [2] ROCKER ARM AS  
    (EACH INCLUDES)
10A. [1] SEAT-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31240048
 

115-4210: SEAL GP-CRANKSHAFT

115-4210 SEAL GP-CRANKSHAFT
S/N 3AK1083-UP
PART OF 168-8661 ENGINE AR-CORE
i01342002 SEBP3124
1154210 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3910 [1] SEAL GP-CRANKSHAFT (REAR)  
2. 245-7339 [1] SEAL-CRANKSHAFT (FRONT)  
3. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
 

#SEBP31240049
 

194-1680: BREATHER GP

194-1680 BREATHER GP
S/N 3AK1083-UP
PART OF 168-8661 ENGINE AR-CORE
i01364397 SEBP3124
1941680 BREATHER GP Parts scheme
  For full view, you need register

Parts for your 322C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9162 [1] BREATHER AS (CRANKCASE)  
2. 8H-2046 [1] SEAL-O-RING  
3. 6V-3821 M [1] BOLT (M8X1.25X110-MM)  
4. 9N-0869 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
5. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
6. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 4P-9936 [1] BASE  
8. 7C-1159 [1] GASKET  
  M   METRIC PART
 

Information:

Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
3114, 3116, 3126 Engines
Connecting Rod
3114, 3116, 3126 Engines
Piston and Rings
3114, 3116, 3126 Engines
Connecting Rod Bearing Journal
3114, 3116, 3126 Engines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116, and 3126 Engines
Compression - Test
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Connecting Rod Bearings - Inspect
3114, 3116, and 3126 Engines
Piston Ring Groove - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}
2002/11/04
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
2004/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 322C :

PAN GP-OIL
176-9429 PAN GP-OIL
MOUNTING GP-ENGINE
178-6448 MOUNTING GP-ENGINE
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
LIFTING GP-ENGINE
117-3476 LIFTING GP-ENGINE
HOUSING GP-FRONT
101-4539 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
7W-8813 HOUSING GP-FLYWHEEL
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
FLYWHEEL GP
9Y-6092 FLYWHEEL GP
PISTON & ROD GP
147-9592 PISTON & ROD GP
PLUG GP-CYLINDER BLOCK
156-0228 PLUG GP-CYLINDER BLOCK
PULLEY GP
101-0427 PULLEY GP
PULLEY GP
208-3727 PULLEY GP
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
PULLEY GP-FAN & ALT DRIVE
205-6733 PULLEY GP-FAN & ALT DRIVE
ROCKER ARM GP
107-7722 ROCKER ARM GP
SEAL GP-CRANKSHAFT
115-4210 SEAL GP-CRANKSHAFT

Truck sale:

2005 CAT 322C
Call 
2005 CAT 322C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
 
Call 
2004 CAT 322C

Maquinaria Intertorito S.A. de C.V.
Tlalnepantla, Distrito Federal, Mexico
2004 CAT 322C
USD $62,487 
2004 CAT 322C

Nationwide Machinery Sales & Hire
Dubbo, NSW, Australia
CAT 322C
Call 
CAT 322C

Drill Worx
Blauvelt, New York
2003 CAT 322C
 
2003 CAT 322C

Four-D Equipment
Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.