ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP31300160
143-4780: WIRING GP-CAB
143-4780 WIRING GP-CAB
S/N 4TM4014-UP
PART OF 173-3828 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N 4TM4014-UP
PART OF 173-3828 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 2. | 102-8802 B | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 4. | 102-8804 B | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 5P-4571 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | |
| 6. | 8T-8737 B | [6] | PLUG-SEAL | |
| 7. | 084-4277 | [1] | LAMP GP-DOME (12-VOLT)(CAB) | |
| 8. | 120-7260 | [1] | HARNESS AS-CAB | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| B | USE AS REQUIRED | |||
#SEBP31300161
143-5297: WIRING GP-CAB
143-5297 WIRING GP-CAB
S/N 4TM4014-UP
PART OF 173-3828 CAB AR-ENCLOSED ROPS, 173-3824 CAB AR-OPEN ROPS
AN ATTACHMENT
S/N 4TM4014-UP
PART OF 173-3828 CAB AR-ENCLOSED ROPS, 173-3824 CAB AR-OPEN ROPS
AN ATTACHMENT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8I-5371 | [1] | PLATE | |
| 2. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 3. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 8I-6336 | [1] | HARNESS AS-TRANSMISSION | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 109-2356 | [2] | PLUG | |
| 7. | 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | |
| 8. | 7K-1181 B | [6] | STRAP-CABLE | |
| 9. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 10. | 1H-3338 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 11. | 8P-5411 B | [1] | BUTTON-PLUG | |
| 12. | 3S-2093 B | [6] | STRAP-CABLE | |
| 143-5296 FY | [1] | PANEL GP-TRIM | ||
| 5P-8500 F | [1] | KEY | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31300162
144-8046: WIRING GP-CHASSIS
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8737 | [27] | PLUG-SEAL | |
| 2. | 144-8050 | [1] | HARNESS AS-REAR CHASSIS | |
| 3. | 160-5797 | [1] | WIRE AS (STOP SWITCH) | |
| 4. | 2H-9523 | [1] | GROMMET | |
| 5. | 3E-3361 | [1] | PLUG AS-CONNECTOR (2-PIN)(WORKLAMP) | |
| 6. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| 7. | 102-8808 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| 8. | 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | |
| 9. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| 10. | 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | |
| 11. | 3S-2093 B | [13] | STRAP-CABLE | |
| 12. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 13. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP31300163
173-4215: WIRING GP-CHASSIS
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS#SEBP31300164
174-1715: WIRING GP-CHASSIS
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-4246 | [2] | CLIP (LOOP) | |
| 2. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 7T-0635 | [1] | HORN AS (12-VOLT) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | ||
| 4. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 3T-7076 | [1] | SENDER AS-TEMPERATURE (12-VOLT) | |
| 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | ||
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 7. | 3S-2093 B | [8] | STRAP-CABLE | |
| 8. | 8I-6428 | [1] | SENDER AS-TEMPERATURE (12-VOLT) | |
| 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | ||
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 9. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 10. | 037-5197 | [1] | BOOT | |
| 11. | 1M-4543 | [1] | GROMMET | |
| 12. | 3E-7278 | [2] | SWITCH GP-MAGNETIC | |
| 13. | 1H-3338 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 14. | 5C-9553 M | [6] | BOLT (M6X1X16-MM) | |
| 15. | 144-3623 | [1] | HARNESS AS-ENGINE | |
| 16. | 8T-3425 D | CHANNEL-TRIM (.2M) | ||
| 17. | 173-4215 Y | [1] | WIRING GP-CHASSIS | |
| 18. | 6V-7743 M | [4] | LOCKNUT (M6X1-THD) | |
| 19. | 7K-1181 B | [19] | STRAP-CABLE | |
| 20. | 5P-4295 | [2] | CLIP | |
| 21. | 4P-7429 | [1] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31300165
140-2536: WIRING GP-CONTROL
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS#SEBP31300166
146-4088: WIRING GP-CONTROL
146-4088 WIRING GP-CONTROL
S/N 4TM4014-UP
PART OF 173-8738 HITCH GP-TOWING
AN ATTACHMENT
S/N 4TM4014-UP
PART OF 173-8738 HITCH GP-TOWING
AN ATTACHMENT
#SEBP31300167
121-2462: AXLE GP-FRONT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 6V-8634 | [1] | CONNECTOR | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 2. | 175-9400 Y | [1] | AXLE GP-FRONT | |
| 3. | 125-3297 M | [8] | BOLT (M20X2.5X260-MM) | |
| 4. | 150-3033 | [1] | ELBOW AS | |
| 8T-0164 | [1] | ELBOW | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 5. | 089-7497 | [2] | PLATE | |
| 6. | 8T-4123 | [16] | WASHER (3.62X5.75X0.375-MM THK) | |
| 7. | 8T-4131 M | [16] | NUT (M20X2.5-THD) | |
| 8. | 179-8591 | [16] | NUT-HEX FLANGE (M22X1.5-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31300168
175-9400: AXLE GP-FRONT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS#SEBP31300169
121-2463: AXLE GP-REAR
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-9401 Y | [1] | AXLE GP-REAR | |
| 2. | 148-8374 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-8723 | [1] | ELBOW | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 3. | 7X-2532 M | [4] | BOLT (M20X2.5X130-MM) | |
| 4. | 8T-4123 | [8] | WASHER (3.62X5.75X0.375-MM THK) | |
| 5. | 8T-4131 M | [4] | NUT (M20X2.5-THD) | |
| 6. | 179-8591 | [16] | NUT-HEX FLANGE (M22X1.5-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Special Instruction
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Service Letter-Asia
Systems Operation
Wiring Diagram
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Product Support Program For Installing Improved Joystick Handle And Wiring On Certain TH62, TH63, Th82, TH83 And TH103 Telehandlers
Testing and Adjusting
Switch (Boom) - Test
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System
Switch (Boom) - Adjust
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System
TH103, TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator System
Troubleshooting
Service Magazine
Correction To Operational Check And Zero Check For LSI (Type 2 System) {7455,7400,1706,1408}
1998/08/17
1998/08/17
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}




