HYDRAULIC SYSTEM
CYLINDER GPTANK GP
FILTER GP
FITTING GP
HYDRAULIC GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP31300290
190-3085: CYLINDER GP-COUPLER
190-3085 CYLINDER GP-COUPLER
S/N 4TM5000-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
S/N 4TM5000-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-3893 | [2] | ROD | |
| 2. | 190-3611 | [1] | VALVE AS-CHECK (COUPLER CYLINDER) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 180-9872 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
| (INCLUDES LOCKNUTS, PISTON SEALS, O-RINGS, BACKUP RINGS, O-RING SEALS, U-CUP SEALS, WIPER SEALS, | ||||
| INSTALLATION RINGS & WIRE RETAINERS) | ||||
#SEBP31300291
141-8493: CYLINDER GP-HITCH
141-8493 CYLINDER GP-HITCH
S/N 4TM4014-UP
60MM(2.37IN)BORE X 457MM(17.99IN)STROKE
PART OF 137-7350 HITCH GP-TOWING
AN ATTACHMENT
S/N 4TM4014-UP
60MM(2.37IN)BORE X 457MM(17.99IN)STROKE
PART OF 137-7350 HITCH GP-TOWING
AN ATTACHMENT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-9111 | [1] | PISTON | |
| 2. | 141-7449 J | [1] | SEAL-ROD | |
| 3. | 141-7451 J | [1] | SEAL-WIPER | |
| 4. | 141-7452 J | [1] | SEAL-O-RING | |
| 5. | 141-7453 J | [1] | RING-BACKUP | |
| 6. | 141-7454 J | [1] | SEAL-O-RING | |
| 7. | 141-9109 J | [2] | RING-WEAR | |
| 8. | 141-9110 J | [1] | SEAL-PISTON | |
| AVAILABLE REPAIR KIT(S): | ||||
| 141-9765 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP31300292
185-1839: CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
S/N 4TM4014-UP
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@
S/N 4TM4014-UP
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-0122 | [1] | HEAD | |
| 2. | 9T-2212 | [1] | PISTON | |
| 3. | 9T-4008 | [1] | ROD AS | |
| 3A. | 9T-4007 | [2] | BEARING | |
| 4. | 9T-4009 | [1] | CYLINDER AS | |
| 5. | 167-2186 J | [1] | SEAL AS-BUFFER | |
| 6. | 167-2294 J | [1] | SEAL-U-CUP | |
| 7. | 1H-7339 J | [1] | SEAL-O-RING | |
| 8. | 226-8202 J | [1] | SEAL-WIPER | |
| 9. | 4T-6780 J | [1] | RING-WEAR | |
| 10. | 5P-8250 | [1] | WASHER (28X49X5-MM THK) | |
| 11. | 6F-7037 | [1] | BOLT (1-14X3.25-IN) | |
| 12. | 6J-1972 J | [1] | SEAL AS | |
| 13. | 6J-5733 J | [1] | RING-WEAR | |
| 14. | 8J-2574 J | [1] | RING-BACKUP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 235-0354 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP31300293
9T-4006: CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
S/N 4TM4014-UP
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
PART OF 163-4284 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT ORDER @@@@@185-1839@@@@@
AN ATTACHMENT
S/N 4TM4014-UP
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
PART OF 163-4284 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT ORDER @@@@@185-1839@@@@@
AN ATTACHMENT
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-4008 | [1] | ROD AS | |
| 2. | 9T-4007 | [2] | BEARING | |
| 3. | 167-2450 J | [1] | SEAL-WIPER | |
| 4. | 167-2294 J | [1] | SEAL-U-CUP | |
| 5. | 167-2186 J | [1] | SEAL AS-BUFFER | |
| 6. | 4T-6780 J | [1] | RING-WEAR | |
| 7. | 9T-2074 | [1] | HEAD | |
| 8. | 8J-2574 J | [1] | RING-BACKUP | |
| 9. | 1H-7339 | [1] | SEAL-O-RING | |
| 10. | 9T-4009 | [1] | CYLINDER AS | |
| 11. | 6J-1972 J | [1] | SEAL AS | |
| 12. | 5P-8250 | [1] | WASHER (28X49X5-MM THK) | |
| 13. | 6F-7037 | [1] | BOLT (1-14X3.25-IN) | |
| 14. | 9T-2212 | [1] | PISTON | |
| 15. | 6J-5733 J | [1] | RING-WEAR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-6583 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP31300294
164-6047: CYLINDER GP-TELESCOPING
164-6047 CYLINDER GP-TELESCOPING
S/N 4TM4014-UP
80MM(3.15IN)BORE X 3000MM(118.11IN)STROKE
PART OF 173-2319 CYLINDER & MTG GP-TELESCOPING
S/N 4TM4014-UP
80MM(3.15IN)BORE X 3000MM(118.11IN)STROKE
PART OF 173-2319 CYLINDER & MTG GP-TELESCOPING
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 166-6381 | [1] | VALVE AS | |
| 161-1980 | [1] | KIT-SERVICE | ||
| 2. | 8Q-6163 J | [1] | RING-GUIDE | |
| 3. | 8Q-6275 | [1] | PISTON | |
| 4. | 8Q-6034 J | [1] | SEAL-PISTON | |
| 5. | 8Q-6033 J | [1] | SEAL-O-RING | |
| 6. | 8Q-6153 | [1] | SCREW | |
| 7. | 8Q-6161 J | [1] | SEAL-O-RING | |
| 8. | 8Q-6274 | [1] | SPACER | |
| 9. | 8Q-6273 | [1] | ROD-PISTON | |
| 10. | 174-4752 | [1] | BARREL AS | |
| 11. | 8Q-6062 J | [2] | RING-GUIDE | |
| 12. | 8Q-6031 J | [1] | SEAL-O-RING | |
| 13. | 8Q-6032 J | [1] | RING-BACKUP | |
| 14. | 8Q-6159 J | [1] | SEAL-O-RING | |
| 15. | 8Q-6061 J | [1] | SEAL-ROD | |
| 16. | 8Q-6233 | [1] | COVER-END | |
| 17. | 8Q-6063 | [1] | SEAL-WIPER | |
| 18. | 8Q-6270 | [2] | BUSHING | |
| 20. | 169-1518 | [2] | PLUG | |
| 21. | 169-1521 | [2] | WASHER (14.96X23.8X2.85-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Q-6290 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP31300295
166-8010: CYLINDER GP-TILT
166-8010 CYLINDER GP-TILT
S/N 4TM4014-UP
140MM (5.51IN) BORE X 341MM (13.43IN) STROKE
PART OF 173-2455 BOOM GP
S/N 4TM4014-UP
140MM (5.51IN) BORE X 341MM (13.43IN) STROKE
PART OF 173-2455 BOOM GP
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Q-5877 | [1] | SEAL-ROD | |
| 2. | 8Q-5885 | [1] | RING-LOCK | |
| 3. | 8Q-5888 | [1] | RING-GUIDE | |
| 4. | 8Q-5979 | [1] | RING-BACKUP | |
| 5. | 8Q-5983 | [1] | SEAL | |
| 6. | 183-5715 | [1] | CYLINDER AS | |
| 7. | 183-5721 | [1] | ROD AS | |
| 8. | 183-5725 | [1] | HEAD | |
| 9. | 183-5755 | [1] | PISTON | |
| 10. | 184-3468 | [1] | RING-GUIDE | |
| 11. | 184-3482 | [2] | BEARING | |
| 12. | 187-9311 | [1] | VALVE GP-CONTROL | |
| 13. | 188-2424 | [1] | BEARING | |
| 14. | 095-1562 | [1] | SEAL-O-RING | |
| 15. | 095-1681 | [1] | SEAL-O-RING | |
| 16. | 095-1704 | [1] | SEAL-O-RING | |
| 17. | 099-0729 M | [1] | SETSCREW-SOCKET | |
| 18. | 8Q-5891 | [1] | WIPER | |
| M | METRIC PART | |||
#SEBP31300296
137-4687: FILLER GP-HYDRAULIC OIL
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2314 M | [6] | BOLT (M5X0.8X35-MM) | |
| 2. | 8I-5551 | [1] | HOSE | |
| 3. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 4. | 8T-6703 | [2] | CLAMP-HOSE | |
| 5. | 133-5172 | [1] | CAP-FILLER | |
| 6. | 137-1815 | [1] | TUBE AS-FILLER | |
| 7. | 137-5037 | [1] | GASKET | |
| 8. | 134-1374 CM | [2] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP31300297
152-8308: FILTER GP-OIL
152-8308 FILTER GP-OIL
S/N 4TM4014-UP
PART OF 164-9198 LINES GP-HYDRAULIC
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL
S/N 4TM4014-UP
PART OF 164-9198 LINES GP-HYDRAULIC
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-1817 | [1] | FILTER-OIL (ULTRA HIGH EFFICIENCY) |
#SEBP31300298
137-4688: FITTING GP-HYDRAULIC
137-4688 FITTING GP-HYDRAULIC -HYDRAULIC TANK
S/N 4TM4014-UP
PART OF 173-8741 FRAME AR
S/N 4TM4014-UP
PART OF 173-8741 FRAME AR
Parts for your TH62 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-8510 | [1] | BREATHER (HYDRAULIC TANK) | |
| 2. | 185-5895 | [1] | SEAL | |
| 3. | 148-8335 | [1] | CONNECTOR AS | |
| 6V-8635 | [1] | CONNECTOR | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 4. | 148-8336 | [3] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 6V-8636 | [1] | CONNECTOR | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 5. | 148-8340 | [1] | CONNECTOR AS | |
| 6V-8639 | [1] | CONNECTOR | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6. | 148-8407 B | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 7. | 148-8411 | [1] | PLUG AS | |
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| B | USE AS REQUIRED | |||
#SEBP31300299
174-0057: HYDRAULIC AR
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Boom Extend Cylinder Lock Valve (Three Section Boom).
TH62, TH63 TH82 & TH83 TELEHANDLERS MACHINE SYSTEMS
TH62, TH63 TH82 & TH83 TELEHANDLERS MACHINE SYSTEMS
Telescoping Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Compensating Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Compensating Cylinder - Disassemble and Assemble" {5816}
2002/07/22
2002/07/22
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}




