HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP#SEBP31310280
173-2317: CYLINDER & MTG GP-COMPENSATING
173-2317 CYLINDER & MTG GP-COMPENSATING
S/N 5WM6021-UP
PART OF 165-7690 BOOM AR
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 165-7690 BOOM AR
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 166-8012 Y | [2] | CYLINDER GP-COMPENSATING | |
| 2. | 168-9869 | [4] | PIN AS | |
| 3. | 089-7338 | [4] | SLEEVE (11X20X9-MM THK) | |
| 4. | 8T-4222 | [3] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 5. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 6. | 124-6696 | [4] | ADAPTER | |
| (EACH INCLUDES) | ||||
| 5C-6266 | [1] | BOLT (5/8-11X1-IN) | ||
| 7. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 8. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 9. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31310281
148-7827: CYLINDER & MTG GP-COUPLER
148-7827 CYLINDER & MTG GP-COUPLER
S/N 5WM6021-UP
PART OF 165-3900 COUPLER AR-QUICK
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 165-3900 COUPLER AR-QUICK
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS#SEBP31310282
209-8350: CYLINDER & MTG GP-COUPLER
209-8350 CYLINDER & MTG GP-COUPLER
S/N 5WM6021-UP
PART OF 219-4579 COUPLER GP-QUICK
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 219-4579 COUPLER GP-QUICK
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS#SEBP31310283
209-8350: CYLINDER & MTG GP-COUPLER
209-8350 CYLINDER & MTG GP-COUPLER
S/N 5WM7929-UP
PART OF 219-4579 COUPLER GP-QUICK
AN ATTACHMENT
S/N 5WM7929-UP
PART OF 219-4579 COUPLER GP-QUICK
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS#SEBP31310284
165-7711: CYLINDER & MTG GP-TELESCOPING
165-7711 CYLINDER & MTG GP-TELESCOPING
S/N 5WM6021-UP
PART OF 165-7691 BOOM GP
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 165-7691 BOOM GP
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 6L-4725 | [4] | CLAMP-HOSE | |
| 3. | 8I-3177 Y | [1] | CYLINDER & VALVE GP-TELESCOPE | |
| 4. | 8I-3483 | [1] | PULLEY | |
| 5. | 8I-3490 | [1] | PAD-WEAR | |
| 6. | 8I-3491 | [1] | BRACKET AS | |
| 7. | 8I-3497 | [2] | SPACER (10-MM THK) | |
| 8. | 081-5551 | [4] | STRIP-RUBBER | |
| 9. | 089-7335 | [2] | BUSHING | |
| 10. | 089-7336 | [1] | SHAFT AS | |
| 11. | 089-7338 | [1] | SLEEVE (11X20X9-MM THK) | |
| 12. | 173-2457 Y | [1] | CHAIN GP-BOOM | |
| 13. | 216-9917 | [1] | TRAY AS | |
| 14. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 19. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31310285
8I-5237: CYLINDER & VALVE GP-BOOM
8I-5237 CYLINDER & VALVE GP-BOOM
S/N 5WM6021-UP
PART OF 8I-3118 CYLINDER & MTG GP-BOOM
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 8I-3118 CYLINDER & MTG GP-BOOM
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS#SEBP31310286
8I-3230: CYLINDER & VALVE GP-FRAME LVL
8I-3230 CYLINDER & VALVE GP-FRAME LVL
S/N 5WM6021-UP
PART OF 8I-3119 LEVELING GP-FRAME
S/N 5WM6021-UP
PART OF 8I-3119 LEVELING GP-FRAME
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS#SEBP31310287
184-4897: CYLINDER & VALVE GP-STABILIZER
184-4897 CYLINDER & VALVE GP-STABILIZER
S/N 5WM6021-UP
PART OF 179-5332 STABILIZER GP
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 179-5332 STABILIZER GP
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8I-3829 | [1] | VALVE GP-LOAD CONTROL | |
| 119-3435 | [2] | SEAL-O-RING | ||
| 119-3970 | [1] | VALVE-CHECK | ||
| 2. | 179-6710 I | [1] | HOSE AS | |
| 3. | 179-6712 | [1] | LINES GP-STABILIZER | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 166-7284 | [1] | COUPLING AS | ||
| 179-6710 I | [1] | HOSE AS | ||
| 4. | 184-4896 Y | [1] | CYLINDER GP-STABILIZER | |
| 5. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 6. | 7X-0818 M | [3] | BOLT (M8X1.25X45-MM) | |
| 7. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31310288
207-7843: CYLINDER & VALVE GP-STABILIZER
207-7843 CYLINDER & VALVE GP-STABILIZER
S/N 5WM6021-UP
PART OF 207-7841 STABILIZER GP
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 207-7841 STABILIZER GP
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-9203 | [1] | SWITCH AS-PRESSURE | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 2. | 179-6710 I | [1] | HOSE AS | |
| 3. | 179-6712 Y | [1] | LINES GP-STABILIZER | |
| 4. | 184-4896 Y | [1] | CYLINDER GP-STABILIZER | |
| 5. | 205-7555 | [1] | PLATE AS | |
| 6. | 205-7999 | [1] | VALVE GP-CONTROL | |
| 119-3970 | [1] | VALVE-CHECK | ||
| 119-3435 | [2] | SEAL-O-RING | ||
| 119-3969 | [1] | VALVE-COUNTERBALANCE | ||
| 7. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 8. | 3J-1907 | [1] | SEAL-O-RING | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31310289
214-7408: CYLINDER & VALVE GP-STABILIZER
214-7408 CYLINDER & VALVE GP-STABILIZER
S/N 5WM6021-UP
PART OF 207-7841 STABILIZER GP
AN ATTACHMENT
S/N 5WM6021-UP
PART OF 207-7841 STABILIZER GP
AN ATTACHMENT
Parts for your TH63 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-9203 | [1] | SWITCH AS-PRESSURE | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 2. | 179-6710 I | [1] | HOSE AS | |
| 3. | 184-4896 Y | [1] | CYLINDER GP-STABILIZER | |
| 4. | 205-7555 | [1] | PLATE AS | |
| 5. | 205-7999 | [1] | VALVE GP-CONTROL | |
| 119-3970 | [1] | VALVE-CHECK | ||
| 119-3435 | [2] | SEAL-O-RING | ||
| 119-3969 | [1] | VALVE-COUNTERBALANCE | ||
| 6. | 214-6821 | [1] | HOSE AS | |
| 6V-8397 | [1] | SEAL-O-RING (10.21MM ID) | ||
| 166-7284 | [1] | COUPLING AS | ||
| 214-6814 I | [1] | HOSE AS | ||
| 7. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 8. | 3J-1907 | [1] | SEAL-O-RING (11.89MM ID) | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Replacing The Compensating Cylinder Hoses That May Leak On Certain TH63 And TH83 Telehandlers
Product Support Program For Replacing The Compensating Cylinder Hoses That May Leak On Certain TH63 And TH83 Telehandlers
Product Support Program For Replacing The Compensating Cylinder Hoses That May Leak On Certain TH63 And TH83 Telehandlers
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Boom Extend Cylinder Lock Valve (Three Section Boom).
TH62, TH63 TH82 & TH83 TELEHANDLERS MACHINE SYSTEMS
TH62, TH63 TH82 & TH83 TELEHANDLERS MACHINE SYSTEMS
Frame Leveling Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Stabilizer Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Telescoping Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Compensating Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Compensating Cylinder - Disassemble and Assemble" {5816}
2002/07/22
2002/07/22
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Caterpillar Parts SIS Catalog TH63 :
Truck sale:
54,075



