HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP
#SEBP31340320
188-0563: CYLINDER GP-COUPLER
188-0563 CYLINDER GP-COUPLER
S/N 3PN2027-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 1
AN ATTACHMENT
S/N 3PN2027-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-3893 | [2] | ROD | |
| 2. | 183-1404 | [1] | VALVE GP-CHECK (COUPLER CYLINDER) | |
| 3J-1907 F | [1] | SEAL-O-RING | ||
| 9S-8004 F | [1] | PLUG (9/16-18-THD) | ||
| 198-1877 F | [1] | PLUG AS | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 180-9872 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
| (INCLUDES LOCKNUT, TEFLON PISTON SEAL, PISTON O-RING, O-RING SEALS, BACK-UP RING, SQUARE WIRE RETAINER, U-CUP SEAL) | ||||
| F | NOT SHOWN | |||
#SEBP31340321
188-0563: CYLINDER GP-COUPLER
188-0563 CYLINDER GP-COUPLER
S/N 3PN2027-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 2
AN ATTACHMENT
S/N 3PN2027-2777
50.8-MM (2-IN) BORE X 231.6-MM (9.1-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP31340322
190-3085: CYLINDER GP-COUPLER
190-3085 CYLINDER GP-COUPLER
S/N 3PN2778-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
S/N 3PN2778-UP
51-MM (2-IN) BORE X 158-MM (6.22-IN) STROKE
PART OF 148-7827, 209-8350 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-3893 | [2] | ROD | |
| 2. | 190-3611 | [1] | VALVE AS-CHECK (COUPLER CYLINDER) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 180-9872 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
| (INCLUDES LOCKNUTS, PISTON SEALS, O-RINGS, BACKUP RINGS, O-RING SEALS, U-CUP SEALS, WIPER SEALS, | ||||
| INSTALLATION RINGS & WIRE RETAINERS) | ||||
#SEBP31340323
137-5871: CYLINDER GP-FRAME LEVELING
137-5871 CYLINDER GP-FRAME LEVELING
S/N 3PN2027-UP
PART OF 125-2462 LEVELING GP-FRAME
S/N 3PN2027-UP
PART OF 125-2462 LEVELING GP-FRAME
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP31340324
8I-6091: CYLINDER GP-FRAME LEVELING
8I-6091 CYLINDER GP-FRAME LEVELING
S/N 3PN2027-UP
PART OF 137-5871 CYLINDER GP-FRAME LEVELING
S/N 3PN2027-UP
PART OF 137-5871 CYLINDER GP-FRAME LEVELING
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Q-6134 | [1] | PISTON | |
| 2. | 8Q-6085 J | [1] | SEAL-PISTON | |
| 3. | 8Q-5972 J | [1] | SEAL-O-RING | |
| 4. | 8Q-5883 J | [2] | SCREW (6X0.5-IN) | |
| 5. | 8Q-6057 | [4] | SCREW (6X0.5-IN) | |
| 6. | 8Q-5876 | [1] | PLATE-PROTECTION | |
| 7. | 8Q-6059 | [1] | SEAL | |
| 8. | 125-0758 | [1] | TUBE AS | |
| 9. | 125-0761 | [1] | ROD AS-PISTON | |
| 10. | 8Q-6087 J | [1] | SEAL-O-RING | |
| 11. | 8Q-6125 J | [1] | RING-BACKUP | |
| 12. | 125-0776 J | [1] | RING-LOCK | |
| 13. | 125-0775 J | [1] | SEAL | |
| 14. | 125-5707 J | [1] | RING-GUIDE | |
| 15. | 8Q-6090 J | [1] | SEAL-O-RING | |
| 16. | 138-7963 | [1] | COVER | |
| 17. | 125-5706 J | [1] | WIPER | |
| 18. | 8Q-5902 | [1] | PLATE-WARNING (CYLINDER ASSEMBLY) | |
| 20. | 8Q-5969 | [2] | BEARING-SPHERICAL | |
| AVAILABLE REPAIR KIT(S): | ||||
| J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP31340325
184-4896: CYLINDER GP-STABILIZER
184-4896 CYLINDER GP-STABILIZER
S/N 3PN2027-UP
100MM (3.94IN) BORE X 464MM (18.27IN) STROKE
PART OF 184-4897, 207-7843, 214-7408 CYLINDER & VALVE GP-STABILIZER
AN ATTACHMENT
S/N 3PN2027-UP
100MM (3.94IN) BORE X 464MM (18.27IN) STROKE
PART OF 184-4897, 207-7843, 214-7408 CYLINDER & VALVE GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-5704 J | [1] | SEAL-PISTON | |
| 2. | 136-5090 | [1] | PLUG | |
| 3. | 184-5874 | [1] | PISTON | |
| 4. | 8Q-6153 J | [2] | SCREW | |
| 5. | 184-5873 | [1] | CYLINDER AS-STABILIZER | |
| 6. | 125-5709 | [1] | ROD-PISTON | |
| 7. | 8T-4199 M | [3] | BOLT (M8X1.25X12-MM) | |
| 8. | 136-5089 | [1] | COVER | |
| 9. | 136-5088 | [1] | SEAL | |
| 10. | 8Q-5886 J | [1] | SEAL-O-RING | |
| 11. | 8Q-5887 J | [1] | RING-BACKUP | |
| 12. | 125-5711 J | [1] | RING-LOCK | |
| 13. | 125-5705 J | [1] | SEAL | |
| 14. | 125-5707 J | [1] | RING-GUIDE | |
| 15. | 8Q-5889 J | [1] | SEAL-O-RING | |
| 16. | 125-5710 | [1] | COVER | |
| 17. | 125-5706 J | [1] | WIPER | |
| 18. | 8Q-6029 | [1] | FITTING-GREASE | |
| 19. | 8Q-5902 | [1] | PLATE-WARNING (CYLINDER ASSEMBLY) | |
| 20. | 125-5703 | [1] | BEARING | |
| 21. | 125-5702 | [2] | BUSHING | |
| 22. | 125-5714 | [1] | SPACER | |
| 23. | 136-5087 | [2] | RING-SNAP | |
| 24. | 8Q-5989 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Q-6289 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP31340326
197-9725: CYLINDER GP-TELESCOPING
197-9725 CYLINDER GP-TELESCOPING
S/N 3PN2500-UP
PART OF 197-9726 CYLINDER & MTG GP-TELESCOPING
AN ATTACHMENT
S/N 3PN2500-UP
PART OF 197-9726 CYLINDER & MTG GP-TELESCOPING
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP31340327
8I-6092: CYLINDER GP-TELESCOPING
8I-6092 CYLINDER GP-TELESCOPING
S/N 3PN2027-UP
100MM BORE X 3384MM STROKE
PART OF 197-9725, 8I-6493 CYLINDER GP-TELESCOPING
AN ATTACHMENT
S/N 3PN2027-UP
100MM BORE X 3384MM STROKE
PART OF 197-9725, 8I-6493 CYLINDER GP-TELESCOPING
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Q-5878 J | [1] | SEAL-PISTON | |
| 2. | 8Q-5879 J | [1] | RING-GUIDE | |
| 3. | 8Q-5880 J | [1] | SEAL-O-RING | |
| 4. | 8Q-5881 J | [2] | RING-BACKUP | |
| 5. | 8Q-5882 | [1] | PISTON | |
| 6. | 8Q-5883 J | [2] | SCREW (6X0.5-IN) | |
| 7. | 8Q-5884 J | [1] | SEAL-O-RING | |
| 8. | [1] | SPACER | ||
| 9. | 125-0759 | [1] | TUBE AS | |
| 10. | 125-0763 | [1] | ROD AS | |
| 11. | 8Q-5885 J | [1] | RING-LOCK | |
| 12. | 8Q-5877 J | [1] | SEAL-ROD | |
| 13. | 8Q-5886 J | [1] | SEAL-O-RING | |
| 14. | 8Q-5887 J | [1] | RING-BACKUP | |
| 15. | 8Q-5888 J | [1] | RING-GUIDE | |
| 16. | 8Q-5889 J | [1] | SEAL-O-RING | |
| 17. | 8Q-5890 | [1] | COVER-END | |
| 18. | 8Q-5891 J | [1] | WIPER | |
| 19. | 8Q-5902 | [1] | PLATE-WARNING (CYLINDER ASSEMBLY) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Q-6218 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP31340328
8I-6493: CYLINDER GP-TELESCOPING
8I-6493 CYLINDER GP-TELESCOPING
S/N 3PN2027-UP
PART OF 173-2446 CYLINDER & MTG GP-TELESCOPING
AN ATTACHMENT
S/N 3PN2027-UP
PART OF 173-2446 CYLINDER & MTG GP-TELESCOPING
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8I-6092 Y | [1] | CYLINDER GP-TELESCOPING | |
| 2. | 166-6382 C | [1] | VALVE AS | |
| 119-3434 | [4] | SEAL-O-RING | ||
| 119-3689 | [1] | VALVE-LOAD CHECK | ||
| 161-1980 | [1] | KIT-SERVICE | ||
| 3. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 8T-6912 M | [4] | BOLT (M8X1.25X50-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31340329
166-8008: CYLINDER GP-TILT
166-8008 CYLINDER GP-TILT
S/N 3PN2027-UP
160MM BORE X 341MM STROKE
PART OF 173-2444, 197-9719 BOOM GP
AN ATTACHMENT
S/N 3PN2027-UP
160MM BORE X 341MM STROKE
PART OF 173-2444, 197-9719 BOOM GP
AN ATTACHMENT
For full view, you need register
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-5043 J | [1] | SEAL-O-RING | |
| 2. | 137-5046 J | [1] | RING-BACKUP | |
| 3. | 137-5050 J | [1] | SCREW | |
| 4. | 137-5051 J | [1] | SEAL-PISTON | |
| 5. | 183-5714 | [1] | CYLINDER AS | |
| 6. | 183-5720 | [1] | ROD AS | |
| 7. | 183-5724 | [1] | HEAD | |
| 8. | 183-5753 | [1] | PISTON | |
| 9. | 184-3465 J | [1] | RING-GUIDE | |
| 10. | 184-3466 J | [1] | RING | |
| 11. | 184-3467 J | [1] | RING-GUIDE | |
| 12. | 184-3475 J | [1] | SEAL | |
| 13. | 184-3476 J | [1] | SEAL-ROD | |
| 14. | 184-3482 | [2] | BEARING | |
| 15. | 187-9311 | [1] | VALVE GP-CONTROL | |
| 216-5574 | [1] | KIT-SEAL | ||
| 16. | 188-2424 | [1] | BEARING | |
| 17. | 030-4606 J | [1] | SEAL-O-RING | |
| 18. | 095-1682 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 188-3882 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Replacing a Pin-on Carriage with a Quick Coupler {5133, 6129}
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Field Installation of the Conversion Arrangement for the Stabilizers
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Frame Leveling Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Stabilizer Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Telescoping Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Compensating Cylinder - Remove and Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Compensating Cylinder - Disassemble and Assemble" {5816}
2002/07/22
2002/07/22
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
