BASIC ENGINE
GEAR GPENGINE BRAKE GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
CYLINDER HEAD GP
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILDBASIC ENGINE
HOUSING GP-FRONTBASIC ENGINE
GEAR GP
#SEBP31360060
188-9134: GEAR GP-REAR
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-2094 | [1] | GEAR AS-CRANKSHAFT (68-TEETH) | |
| 4N-0684 | [1] | DOWEL | ||
| 2. | 9Y-1981 | [1] | GEAR AS-IDLER (78-TEETH) | |
| 1W-4738 | [1] | BUSHING | ||
| 3. | 187-8197 C | [1] | GEAR AS (57-TEETH) | |
| 4F-6024 | [1] | PIN | ||
| 4. | 9Y-1985 | [1] | GEAR AS-IDLER (55-TEETH) | |
| 1W-4738 | [1] | BUSHING | ||
| 5. | 187-8196 C | [1] | GEAR AS (68-TEETH) | |
| 4F-6024 | [1] | PIN | ||
| 6. | 222-1832 C | [1] | ADAPTER AS | |
| 160-8184 | [1] | BUSHING | ||
| 7. | 222-1833 C | [1] | ADAPTER AS | |
| 160-8184 | [1] | BUSHING | ||
| 8. | 9Y-2092 | [2] | RETAINER-IDLER | |
| 9. | 3F-1547 | [1] | SEAL-O-RING (189.86MM ID) | |
| 10. | 6V-5141 | [1] | SEAL-O-RING (221.62MM ID) | |
| 11. | 1A-1460 | [6] | BOLT (1/2-13X2-IN) | |
| 12. | 3B-1915 | [12] | BOLT (3/8-16X1.375-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP31360061
189-5950: HOUSING GP-ENGINE BRAKE
189-5950 HOUSING GP-ENGINE BRAKE
S/N BET200-UP
PART OF 148-7486 ENGINE BRAKE GP
S/N BET200-UP
PART OF 148-7486 ENGINE BRAKE GP
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-6580 | [2] | PISTON | |
| 2. | 2U-1493 | [1] | SEAL | |
| 3. | 2U-1492 | [1] | SEAL | |
| 4. | 143-2536 | [2] | SPRING (INNER)(CONTROL VALVE) | |
| 5. | 143-2596 | [2] | SPRING (OUTER)(CONTROL VALVE) | |
| 6. | 143-6589 | [2] | COVER | |
| 7. | 143-6679 | [2] | RING-RETAINING | |
| 8. | 1Q-9551 | [2] | SCREW-BUTTON HEAD (1/2-20X3/8-IN) | |
| 9. | 143-6581 | [2] | SPRING (OUTER)(SLAVE PISTON) | |
| 10. | 143-6588 | [2] | WASHER (12.7X36.1X1.07-MM THK) | |
| 11. | 143-6561 | [2] | RING-RETAINING | |
| 12. | 192-5501 | [2] | PUSHROD AS | |
| 13. | 143-6582 | [2] | SPRING (INNER)(SLAVE PISTON) | |
| 14. | 192-5502 | [2] | SCREW AS-ADJUSTMENT | |
| 15. | 6B-6684 | [2] | NUT-FULL (1/2-20-THD) | |
| 16. | 143-6579 | [1] | CLIP-HARNESS | |
| 17. | 143-6583 | [2] | PISTON (MASTER) | |
| 18. | 143-6584 | [2] | SPRING (MASTER PISTON) | |
| 19. | 164-2025 | [2] | KIT-RETAINER (COMPRESSION BRAKE)(ENGINE BRAKE HOUSING) | |
| (EACH INCLUDES RETAINER WASHERS) | ||||
| 20. | 143-6585 | [2] | PUSHROD (MASTER PISTON) | |
| 21. | 102-8780 | [2] | SPOOL AS-VALVE | |
| 22. | 163-1553 | [1] | SOLENOID (24-VOLT)(ENGINE BRAKE) | |
| 23. | 143-6680 | [1] | SCREW-DRIVE | |
| 24. | 143-6642 | [1] | SEAL | |
#SEBP31360062
221-1197: HOUSING GP-ENGINE BRAKE
221-1197 HOUSING GP-ENGINE BRAKE
S/N BET200-UP
24-VOLT
PART OF 148-7486, 221-1196 ENGINE BRAKE GP
S/N BET200-UP
24-VOLT
PART OF 148-7486, 221-1196 ENGINE BRAKE GP
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-9551 | [2] | SCREW-BUTTON HEAD (1/2-20X3/8-IN) | |
| 2. | 2U-1492 | [1] | SEAL | |
| 3. | 102-8780 | [2] | SPOOL AS-VALVE | |
| 4. | 143-2536 | [2] | SPRING (INNER)(CONTROL VALVE) | |
| 5. | 143-2596 | [2] | SPRING (OUTER)(CONTROL VALVE) | |
| 6. | 143-6561 | [2] | RING-RETAINING | |
| 7. | 143-6575 | [2] | WASHER (12.7X20.2X0.66-MM THK) | |
| 8. | 143-6579 | [1] | CLIP-HARNESS | |
| 9. | 143-6581 | [2] | SPRING (OUTER)(SLAVE PISTON) | |
| 10. | 143-6582 | [2] | SPRING (INNER)(SLAVE PISTON) | |
| 11. | 143-6584 | [2] | SPRING (MASTER PISTON) | |
| 12. | 143-6585 | [2] | PUSHROD (MASTER PISTON) | |
| 13. | 143-6588 | [2] | WASHER (12.7X36.1X1.07-MM THK) | |
| 14. | 143-6589 | [2] | COVER | |
| 15. | 143-6642 | [1] | SEAL | |
| 16. | 143-6680 | [3] | SCREW-DRIVE | |
| 17. | 163-1553 | [1] | SOLENOID (24-VOLT)(ENGINE BRAKE) | |
| 18. | 192-5501 | [2] | PUSHROD AS (SLAVE PISTON) | |
| 19. | 221-1190 | [2] | PISTON (SLAVE) | |
| 20. | 221-1191 | [2] | SCREW | |
| 21. | 221-1192 | [2] | NUT (3/8-24 THD) | |
| 22. | 221-1193 | [2] | PISTON (MASTER) | |
| 23. | 221-1194 | [2] | WASHER | |
| 24. | 221-1195 | [2] | RING-RETAINING |
#SEBP31360063
144-3527: HOUSING GP-FLYWHEEL
144-3527 HOUSING GP-FLYWHEEL
S/N BET200-12961
PART OF 153-7076, 235-4689 ENGINE AR-COMPLETE
S/N BET200-12961
PART OF 153-7076, 235-4689 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 371-0611 | [1] | HOUSING AS-FLYWHEEL | |
| 2. | 8M-9315 | [2] | BUSHING | |
| 3. | 9S-8005 | [4] | PLUG (3/4-16-THD) | |
| 4. | 238-5080 | [4] | SEAL-O-RING | |
| 5. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 9S-8002 | [4] | PLUG (7/16-20-THD) | |
| 7. | 214-7566 | [4] | SEAL-O-RING | |
| 9. | 1W-3136 | [1] | BAFFLE | |
| 10. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 12. | 9K-7290 | [8] | BOLT-12 POINT HEAD (1/2-13X3.25-IN) | |
| 13. | 155-5619 | [1] | GASKET | |
| 14. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN) | |
| 15. | 165-3932 | [5] | BOLT (3/8-16X2-IN) | |
| 16. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 17. | 165-3936 | [2] | BOLT (3/8-16X4.5-IN) | |
| 18. | 4M-0189 | [1] | SEAL-O-RING | |
| 19. | 116-3046 | [1] | COVER | |
| 20. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 21. | 5P-8245 | [11] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 2P-2772 | [1] | COVER | |
| 23. | 4N-0933 | [1] | GASKET | |
| 24. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 25. | 2A-1162 | [1] | GASKET | |
| 26. | 5F-0304 | [1] | PLUG | |
| 27. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) |
#SEBP31360064
144-3527: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 371-0611 | [1] | HOUSING AS-FLYWHEEL | |
| 2. | 8M-9315 | [2] | BUSHING | |
| 3. | 9S-8005 | [4] | PLUG (3/4-16-THD) | |
| 4. | 238-5080 | [4] | SEAL-O-RING | |
| 5. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 9S-8002 | [4] | PLUG (7/16-20-THD) | |
| 7. | 214-7566 | [4] | SEAL-O-RING | |
| 9. | 1W-3136 | [1] | BAFFLE | |
| 10. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 12. | 9K-7290 | [8] | BOLT-12 POINT HEAD (1/2-13X3.25-IN) | |
| 13. | 155-5619 | [1] | GASKET | |
| 14. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN) | |
| 15. | 165-3932 | [5] | BOLT (3/8-16X2-IN) | |
| 16. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 17. | 165-3936 | [2] | BOLT (3/8-16X4.5-IN) | |
| 18. | 4M-0189 | [1] | SEAL-O-RING | |
| 19. | 175-3721 C | [1] | COVER | |
| 20. | 2H-3855 C | [2] | BOLT (1/2-13X0.875-IN) | |
| 21. | 5P-8245 C | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 2P-2772 | [1] | COVER | |
| 23. | 234-8937 | [1] | SEAL-INTEGRAL | |
| 24. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 25. | 2A-1162 | [1] | GASKET | |
| 26. | 5F-0304 | [1] | PLUG | |
| 27. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31360065
124-6822: HOUSING GP-FRONT
124-6822 HOUSING GP-FRONT
S/N BET200-UP
NO SOUND SUPPRESSION
PART OF 153-7076, 235-4689 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENERS, ALTERNATOR MOUNTING
S/N BET200-UP
NO SOUND SUPPRESSION
PART OF 153-7076, 235-4689 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENERS, ALTERNATOR MOUNTING
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-7340 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 3. | 7C-1445 | [1] | COVER | |
| 4. | 2B-2695 | [2] | BOLT (5/16-18X0.875-IN) | |
| 5. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 7. | 5M-2894 | [29] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 061-9455 | [1] | SEAL-O-RING | |
| 9. | 0S-1588 | [11] | BOLT (3/8-16X1.25-IN) | |
| 10. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 11. | 9X-6458 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 155-3629 | [1] | GASKET | |
| 14. | 7X-4805 | [2] | SEAL-O-RING | |
| 15. | 353-9977 Y | [1] | PLATE AS-FRONT HOUSING | |
| 16. | 166-9144 | [1] | GASKET | |
| 17. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 18. | 0T-0055 | [9] | BOLT (3/8-16X4.25-IN) | |
| 19. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 23. | 6I-3968 | [1] | BRACKET-SUPPORT | |
| 24. | 0S-1591 | [3] | BOLT (3/8-16X1.5-IN) | |
| 25. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 26. | 101-3120 | [2] | SPACER (10.5X25X20-MM THK) | |
| 27. | 189-9266 | [1] | SENSOR GP-SPEED (CRANKSHAFT/TIMING) | |
| 29. | 2H-3755 | [2] | BOLT (5/16-18X0.43-IN) | |
| 30. | 132-9770 | [1] | SPACER AS | |
| 1W-6448 | [2] | DOWEL | ||
| 32. | 228-4947 | [2] | SEAL-O-RING | |
| 33. | 188-7513 | [1] | SENSOR GP-SPEED (CAMSHAFT/TIMING) | |
| 35. | 3P-1155 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31360066
423-9427: KIT-CYLINDER HEAD GASKET
423-9427 KIT-CYLINDER HEAD GASKET -SINGLE
S/N AXM1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED. KIT INCLUDES TURBO MOUNTING HARDWARE. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD
FOR USE WITH @@@@@153-7076@@@@@, @@@@@235-4689@@@@@, SEHS0361
FIELD INSTALLATION
S/N AXM1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED. KIT INCLUDES TURBO MOUNTING HARDWARE. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD
FOR USE WITH @@@@@153-7076@@@@@, @@@@@235-4689@@@@@, SEHS0361
FIELD INSTALLATION
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 227-1204 | [1] | GASKET | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | ||
| 4N-1156 | [1] | GASKET-REGULATOR COVER | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 5P-5678 D | SEAL (4-M) | |||
| 142-2329 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 3E-6772 | [24] | SEAL (WATER) | ||
| 6V-0128 | [1] | SEAL-CONNECTOR | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4F-7390 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 9X-7430 | [6] | SEAL-O-RING | ||
| 112-5282 | [1] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [8] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 272-2583 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| D | ORDER BY THE METER | |||
#SEBP31360067
380-0468: KIT-ENGINE OVERHAUL
380-0468 KIT-ENGINE OVERHAUL
S/N AXM1-UP
(BRONZE KIT) USED IN THE 740 MACHINES
FOR USE WITH @@@@@235-4689@@@@@, @@@@@153-7076@@@@@, REHS7285
FIELD INSTALLATION
S/N AXM1-UP
(BRONZE KIT) USED IN THE 740 MACHINES
FOR USE WITH @@@@@235-4689@@@@@, @@@@@153-7076@@@@@, REHS7285
FIELD INSTALLATION
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 328-5573 | [6] | BEARING-CONNECTING ROD (STANDARD) | ||
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 8M-9315 | [2] | BUSHING | ||
| 130-4698 | [1] | BUSHING | ||
| 216-5582 | [7] | BUSHING (STANDARD) | ||
| 217-0751 AB | BUSHING (0.25-MM OS) | |||
| 217-0752 AB | BUSHING (0.762-MM OS) | |||
| 261-3429 AB | BUSHING (1.778-MM OS) | |||
| 261-3430 AB | BUSHING (1.27-MM OS) | |||
| 9M-2904 | [2] | CLAMP-HOSE | ||
| 1R-1808 | [1] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) | ||
| 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 2A-1162 | [1] | GASKET (DRAIN PLUG) | ||
| 2P-3760 | [3] | GASKET | ||
| 4H-7869 | [1] | GASKET | ||
| 4M-6480 | [1] | GASKET | ||
| 4N-0641 | [2] | GASKET (TEMPERATURE REGULATOR) | ||
| 4N-0699 | [3] | GASKET | ||
| 4N-0933 | [2] | GASKET | ||
| 4N-1151 | [1] | GASKET (ENGINE OIL PAN) | ||
| 9H-8872 | [1] | GASKET | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 155-3629 | [1] | GASKET | ||
| 155-5619 | [1] | GASKET (FLYWHEEL HOUSING) | ||
| 166-9144 | [1] | GASKET | ||
| 227-1204 | [1] | GASKET | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | ||
| 9Y-5281 | [1] | HOSE | ||
| 2N-2766 | [16] | LOCKNUT (3/8-16-THD) | ||
| 165-6170 | [3] | PLUG | ||
| 7X-7732 | [6] | PLUG-PIPE | ||
| 8T-6767 | [3] | PLUG-PIPE (3/8-18-THD) | ||
| 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C) | ||
| 6V-6923 | [1] | RING-BACKUP | ||
| 3E-6772 | [24] | SEAL (WATER) | ||
| 5P-5678 D | SEAL (3-M) | |||
| 103-6045 | [1] | SEAL (FRONT COVER) | ||
| 142-2329 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 6V-0128 | [1] | SEAL-CONNECTOR | ||
| 109-7425 | [1] | SEAL-COVER | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT)(FRONT) | ||
| 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 144-6142 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [2] | SEAL-INTEGRAL | ||
| 234-8937 | [1] | SEAL-INTEGRAL | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3F-1547 | [1] | SEAL-O-RING | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 4F-7390 | [1] | SEAL-O-RING | ||
| 4M-0189 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 5P-5846 | [1] | SEAL-O-RING | ||
| 5P-8068 | [1] | SEAL-O-RING | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3251 | [2] | SEAL-O-RING | ||
| 6V-3683 | [1] | SEAL-O-RING | ||
| 6V-3908 | [2] | SEAL-O-RING | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 6V-5048 | [5] | SEAL-O-RING | ||
| 6V-5141 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 7X-4805 | [2] | SEAL-O-RING | ||
| 8L-2777 | [12] | SEAL-O-RING | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 8L-2786 | [8] | SEAL-O-RING | ||
| 8T-9527 | [1] | SEAL-O-RING | ||
| 9X-7317 | [6] | SEAL-O-RING | ||
| 9X-7371 | [1] | SEAL-O-RING | ||
| 9X-7378 | [1] | SEAL-O-RING | ||
| 9X-7430 | [6] | SEAL-O-RING | ||
| 033-6033 | [1] | SEAL-O-RING | ||
| 061-7539 | [1] | SEAL-O-RING | ||
| 061-8639 | [6] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 109-0076 | [2] | SEAL-O-RING | ||
| 109-0077 | [4] | SEAL-O-RING | ||
| 109-0078 | [1] | SEAL-O-RING | ||
| 112-5282 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 114-4427 | [3] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 118-5068 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 166-2904 | [12] | SEAL-O-RING | ||
| 214-7566 | [13] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 228-7093 | [3] | SEAL-O-RING | ||
| 230-3728 | [6] | SEAL-O-RING | ||
| 230-3775 | [6] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [4] | SEAL-O-RING | ||
| 250-0466 | [2] | SEAL-O-RING | ||
| 272-2583 | [2] | SEAL-O-RING | ||
| 163-2478 | [24] | SEAL-VALVE STEM | ||
| 194-8124 | [6] | SLEEVE AS (EXHAUST PORT) | ||
| 2S-3770 | [1] | SPACER (11X19X33.5-MM THK) | ||
| 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | ||
| 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | ||
| 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | ||
| 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP31360068
380-1593: KIT-ENGINE OVERHAUL
380-1593 KIT-ENGINE OVERHAUL
S/N AXM1-UP
(SILVER KIT) FOR THE 3406E ENGINE USED IN THE 740 MACHINE
FOR USE WITH SEHS0361
FIELD INSTALLATION
S/N AXM1-UP
(SILVER KIT) FOR THE 3406E ENGINE USED IN THE 740 MACHINE
FOR USE WITH SEHS0361
FIELD INSTALLATION
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) | ||
| 328-5573 | [6] | BEARING-CONNECTING ROD (STANDARD) | ||
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 8M-9315 | [2] | BUSHING | ||
| 130-4698 | [1] | BUSHING | ||
| 216-5582 | [7] | BUSHING (STANDARD) | ||
| 217-0751 AB | BUSHING (0.25-MM OS) | |||
| 217-0752 AB | BUSHING (0.762-MM OS) | |||
| 261-3429 AB | BUSHING (1.778-MM OS) | |||
| 261-3430 AB | BUSHING (1.27-MM OS) | |||
| 9M-2904 | [2] | CLAMP-HOSE | ||
| 221-2305 | [6] | CROWN AS-PISTON | ||
| 1R-1808 | [1] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) | ||
| 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 2A-1162 | [1] | GASKET (DRAIN PLUG) | ||
| 2P-3760 | [3] | GASKET | ||
| 4H-7869 | [1] | GASKET | ||
| 4M-6480 | [1] | GASKET | ||
| 4N-0641 | [2] | GASKET (TEMPERATURE REGULATOR) | ||
| 4N-0699 | [3] | GASKET | ||
| 4N-0933 | [2] | GASKET | ||
| 4N-1151 | [1] | GASKET (ENGINE OIL PAN) | ||
| 9H-8872 | [1] | GASKET | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 155-3629 | [1] | GASKET | ||
| 155-5619 | [1] | GASKET (FLYWHEEL HOUSING) | ||
| 166-9144 | [1] | GASKET | ||
| 227-1204 | [1] | GASKET | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | ||
| 9Y-5281 | [1] | HOSE | ||
| 197-9322 | [6] | LINER-CYLINDER BLOCK | ||
| 2N-2766 | [16] | LOCKNUT (3/8-16-THD) | ||
| 168-7246 | [6] | PIN-PISTON | ||
| 165-6170 | [3] | PLUG | ||
| 7X-7732 | [6] | PLUG-PIPE | ||
| 8T-6757 | [3] | PLUG-PIPE | ||
| 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C) | ||
| 7E-1177 | [12] | RETAINER-PIN | ||
| 6V-6923 | [1] | RING-BACKUP | ||
| 134-3761 | [6] | RING-PISTON (TOP) | ||
| 176-5749 | [6] | RING-PISTON (INTERMEDIATE) | ||
| 189-9771 | [6] | RING-PISTON (OIL CONTROL) | ||
| 359-1439 | [24] | SEAL AS-WATER | ||
| 5P-5678 D | SEAL (2-M) | |||
| 103-6045 | [1] | SEAL (FRONT COVER) | ||
| 142-2329 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 6V-0128 | [1] | SEAL-CONNECTOR | ||
| 109-7425 | [1] | SEAL-COVER | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | ||
| 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 144-6142 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 234-8937 | [1] | SEAL-INTEGRAL | ||
| 110-2220 | [6] | SEAL-LINER | ||
| 142-7072 | [6] | SEAL-LINER | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3F-1547 | [1] | SEAL-O-RING | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 4F-7390 | [1] | SEAL-O-RING | ||
| 4M-0189 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 5P-5846 | [1] | SEAL-O-RING | ||
| 5P-8068 | [1] | SEAL-O-RING | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3251 | [2] | SEAL-O-RING | ||
| 6V-3683 | [1] | SEAL-O-RING | ||
| 6V-3908 | [2] | SEAL-O-RING | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 6V-5048 | [5] | SEAL-O-RING | ||
| 6V-5141 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 7X-4805 | [2] | SEAL-O-RING | ||
| 8J-4351 | [1] | SEAL-O-RING | ||
| 8L-2777 | [12] | SEAL-O-RING | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 8L-2786 | [8] | SEAL-O-RING | ||
| 8T-9527 | [1] | SEAL-O-RING | ||
| 9X-7317 | [6] | SEAL-O-RING | ||
| 9X-7371 | [1] | SEAL-O-RING | ||
| 9X-7378 | [1] | SEAL-O-RING | ||
| 9X-7430 | [6] | SEAL-O-RING | ||
| 033-6033 | [1] | SEAL-O-RING | ||
| 061-7539 | [1] | SEAL-O-RING | ||
| 061-8639 | [6] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 109-0076 | [2] | SEAL-O-RING | ||
| 109-0077 | [4] | SEAL-O-RING | ||
| 109-0078 | [1] | SEAL-O-RING | ||
| 112-5282 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 114-4427 | [3] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 118-5068 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 142-6217 | [6] | SEAL-O-RING | ||
| 166-2904 | [12] | SEAL-O-RING | ||
| 214-7566 | [13] | SEAL-O-RING | ||
| 214-7568 | [10] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 228-7093 | [3] | SEAL-O-RING | ||
| 230-3728 | [6] | SEAL-O-RING | ||
| 230-3775 | [6] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [3] | SEAL-O-RING | ||
| 250-0466 | [2] | SEAL-O-RING | ||
| 272-2583 | [2] | SEAL-O-RING | ||
| 163-2478 | [24] | SEAL-VALVE STEM | ||
| 132-6663 | [6] | SKIRT-PISTON | ||
| 194-8124 | [6] | SLEEVE AS (EXHAUST PORT) | ||
| 2S-3770 | [1] | SPACER (11X19X33.5-MM THK) | ||
| 108-3612 | [11] | SPACER (11.13X19.05X53-MM THK) | ||
| 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | ||
| 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | ||
| 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP31360069
423-9426: KIT-FRONT COVER GASKET
423-9426 KIT-FRONT COVER GASKET
S/N AXM1-UP
FOR USE WITH @@@@@153-7076@@@@@, @@@@@235-4689@@@@@
FIELD INSTALLATION
S/N AXM1-UP
FOR USE WITH @@@@@153-7076@@@@@, @@@@@235-4689@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9H-8872 | [1] | GASKET | ||
| 155-3629 | [1] | GASKET | ||
| 166-9144 | [1] | GASKET | ||
| 103-6045 | [1] | SEAL (FRONT COVER) | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | ||
| 144-6142 | [1] | SEAL-INTEGRAL | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 7X-4805 | [2] | SEAL-O-RING | ||
| 8T-9527 | [1] | SEAL-O-RING | ||
| 214-7568 | [3] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 214-7566 | [3] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 228-7088 | [2] | SEAL-O-RING | ||
| 250-0466 | [1] | SEAL-O-RING | ||
| 126-1757 | [12] | WASHER (10.85X19.3X1.27-MM THK) |
