OPERATOR STATION
CAB GPAIR CONDITIONER GP
HEATER GP
MIRROR GP
OPERATOR STATION
CAB GP
#SEBP31360670
155-7474: LINER GP-CAB
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6P-2216 | [49] | CAP (PUSH ON) | |
| 2. | 160-8721 | [1] | TRIM | |
| 3. | 164-5792 | [1] | INSULATION | |
| 4. | 164-5794 | [1] | INSULATION | |
| 5. | 168-0374 | [1] | INSULATION | |
| 6. | 168-0375 | [1] | INSULATION | |
| 7. | 168-0376 | [1] | INSULATION | |
| 8. | 168-0377 | [1] | INSULATION | |
| 9. | 168-0378 | [1] | INSULATION | |
| 10. | 170-4880 | [1] | TRIM | |
| 11. | 189-6524 | [2] | PLUG | |
| 12. | 198-6074 | [1] | LINER | |
| 13. | 198-6081 | [2] | INSULATION | |
| 14. | 198-7409 | [4] | PLUG | |
| 15. | 379-9736 | [1] | FLOOR MAT | |
| 16. | 237-6176 | [1] | FLOOR MAT |
#SEBP31360671
241-8105: LINER GP-CAB
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8928 | [1] | HOOK-COAT | |
| 2. | 8C-0618 | [1] | ASHTRAY AS | |
| 3. | 8Y-6388 | [1] | LOUVER AS-VENT | |
| 4. | 9U-8263 | [1] | COVER | |
| 5. | 114-6658 | [66] | WASHER (6.5X17X1-MM THK) | |
| 6. | 151-5715 | [5] | LOUVER AS-VENT | |
| 7. | 154-7468 | [1] | COVER AS | |
| 8. | 154-7470 | [1] | COVER | |
| 9. | 155-9708 | [1] | COVER AS | |
| 10. | 155-9709 | [1] | COVER (BOTTOM) | |
| 11. | 160-8641 | [1] | LINER AS-CAB | |
| 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | ||
| 160-8684 | [1] | COVER | ||
| 124-6047 | [2] | COVER-SPEAKER | ||
| 12. | 160-8686 | [1] | CHANNEL-REAR | |
| 13. | 160-8687 | [1] | COVER (REAR, LH) | |
| 14. | 160-8688 | [1] | COVER (REAR, RH) | |
| 15. | 160-8718 | [1] | PANEL AS-DOOR | |
| 16. | 160-8723 | [1] | TRIM AS | |
| 114-9125 | [1] | HOLDER-CUP | ||
| 17. | 160-8724 | [1] | TRIM AS | |
| 18. | 160-8725 | [1] | CONSOLE AS | |
| 240-2169 | [1] | RETAINER | ||
| 19. | 160-8728 | [1] | TRIM | |
| 20. | 161-1168 | [1] | FILM-INSTRUCTION (TRANSMISSION) | |
| 21. | 164-8473 | [2] | LOUVER AS | |
| 22. | 170-6019 | [1] | STORAGE AS | |
| 23. | 170-7656 | [2] | GASKET | |
| 24. | 172-6030 | [1] | GASKET | |
| 25. | 185-9793 | [1] | FILM-INSTRUCTION (RETARDER) | |
| 26. | 228-7260 | [1] | DOOR AS | |
| 3H-0240 | [11] | WASHER (5X9.7X0.8-MM THK) | ||
| 9M-5733 | [11] | RIVET-POP | ||
| 165-0399 | [1] | HINGE AS | ||
| 302-4764 | [1] | LATCH AS | ||
| 228-7261 | [1] | TRIM-SEAT | ||
| 27. | 240-8432 | [1] | DASH AS | |
| 28. | 247-5834 | [1] | PLATE | |
| 29. | 101-2867 | [2] | WASHER-HARD (7.2X25X2-MM THK) | |
| 30. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 31. | 118-5619 | [14] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 32. | 3E-4313 M | [10] | SCREW-BUTTON HEAD (M4X0.7X8-MM) | |
| 33. | 6V-0292 | [1] | PLUG | |
| 34. | 9X-2042 M | [29] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 35. | 9X-2044 M | [30] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 36. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 37. | 148-7361 E | FASTENER-HOOK & LOOP (ADHESIVE BACKED)(6-CM) | ||
| 38. | 148-7362 E | FASTENER-HOOK & LOOP (ADHESIVE BACKED)(6-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP31360672
152-6946: LINES GP-AIR CONDITIONER
152-6946 LINES GP-AIR CONDITIONER
S/N AXM1-UP
PART OF 152-6922 HYDRAULIC AR-MACHINE
S/N AXM1-UP
PART OF 152-6922 HYDRAULIC AR-MACHINE
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-6356 | [1] | PLATE | |
| 2. | 103-6100 | [1] | FITTING AS-AIR CONDITIONER (QUICK DISCONNECT) | |
| 9X-7382 | [2] | SEAL-O-RING | ||
| 3. | 188-0995 I | [1] | HOSE AS | |
| 4. | 194-7899 I | [1] | HOSE AS | |
| 5. | 283-6344 I | [1] | HOSE AS | |
| 6. | 116-6202 | [1] | BOOT | |
| 7. | 125-2796 | [1] | FITTING AS-AIR CONDITIONER | |
| 3E-4051 | [1] | CAP-SEAL (LOW SIDE CHARGE PORT) | ||
| 3E-4057 | [1] | VALVE AS (REFRIGERANT, LOW SIDE)(LOW SIDE) | ||
| 8. | 3E-4066 | [1] | FITTING AS-AIR CONDITIONER | |
| 3E-4052 | [1] | CAP-SEAL (HIGH SIDE CHARGE PORT) | ||
| 3E-4058 | [1] | VALVE AS (REFRIGERANT, HIGH SIDE)(HIGH SIDE) | ||
| 9. | 3U-2753 | [3] | CLIP | |
| 10. | 3U-2754 | [2] | CLIP (LOOP) | |
| 11. | 5P-7464 | [1] | CLIP (SLOT) | |
| 12. | 5P-7465 | [1] | CLIP (TAB) | |
| 13. | 5P-7470 | [1] | CLIP (SLOT) | |
| 14. | 5P-7471 | [1] | CLIP (TAB) | |
| 15. | 5P-7703 | [1] | GROMMET (52-MM ID) | |
| 16. | 6V-7359 | [1] | GROMMET (25-MM ID, 37-MM OD) | |
| 17. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 18. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 23. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 24. | 9X-7380 | [2] | SEAL-O-RING | |
| 25. | 9X-7381 | [2] | SEAL-O-RING | |
| 26. | 9X-7382 | [1] | SEAL-O-RING | |
| 27. | 9X-7383 | [1] | SEAL-O-RING | |
| 28. | 9X-7385 | [2] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP31360673
184-6138: LINES GP-AIR CONDITIONER
184-6138 LINES GP-AIR CONDITIONER -ACCUMULATOR, DRYER
S/N AXM1-UP
PART OF 153-5485, 229-8087 CAB AR
S/N AXM1-UP
PART OF 153-5485, 229-8087 CAB AR
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 103-6100 | [1] | FITTING AS-AIR CONDITIONER (QUICK DISCONNECT) | |
| 9X-7382 | [2] | SEAL-O-RING | ||
| 2. | 184-6139 I | [1] | HOSE AS | |
| 3. | 185-6981 | [1] | BRACKET AS | |
| 4. | 186-6189 | [1] | ACCUMULATOR-REFRIGERANT | |
| 5. | 101-8296 | [2] | CLIP | |
| 6. | 109-1633 | [1] | CLIP (SLOT) | |
| 7. | 109-1634 | [1] | CLIP (TAB) | |
| 8. | 116-6202 | [1] | BOOT | |
| 9. | 184-6140 I | [1] | HOSE AS | |
| 10. | 175-7162 | [1] | DRYER AS-REFRIGERANT (IN-LINE) | |
| 7X-2049 | [1] | ORIFICE AS-AIR CONDITIONER | ||
| 330-3117 | [1] | FILM-WARNING (UNIVERSAL, READ OMM) | ||
| 11. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 14. | 9X-7380 | [1] | SEAL-O-RING | |
| 15. | 9X-7381 | [1] | SEAL-O-RING | |
| 16. | 9X-7382 | [1] | SEAL-O-RING | |
| 17. | 9X-7383 | [1] | SEAL-O-RING | |
| 18. | 6V-2495 D | SEAL (0.3-M) | ||
| D | ORDER BY THE METER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP31360674
153-1135: LINES GP-HEATER
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-1026 | [4] | CLAMP-BAND | |
| 2. | 6U-0455 | [3] | STRAP | |
| 3. | 6U-0456 | [1] | STRAP | |
| 4. | 7D-7026 | [1] | CONNECTOR-HOSE | |
| 5. | 6G-0237 | [1] | SEAL | |
| 6. | 005-7889 | [1] | VALVE AS-DRAIN (HEATER) | |
| 7. | 415-6334 E | HOSE (300-CM EACH) | ||
| 8. | 003-2143 | [1] | ELBOW | |
| 9. | 6B-4661 | [2] | BUSHING-REDUCER | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP31360675
211-2038: MIRROR GP-REAR VIEW
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-0017 | [2] | MIRROR | |
| 2. | 208-4539 | [2] | MIRROR | |
| 6L-7008 BF | [53] | STRAP-CABLE | ||
| 102-8802 F | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4P-7581 F | [5] | CLIP (LADDER) | ||
| 186-3735 F | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 165-5979 F | [1] | SWITCH AS-ROCKER (HEATED MIRROR) | ||
| 3E-8825 | [2] | LAMP (24-VOLT)(MINIATURE) | ||
| 3E-8857 | [1] | SWITCH AS-ROCKER (HEATED MIRROR) | ||
| 165-5980 | [1] | ACTUATOR | ||
| 211-2039 F | [2] | HARNESS AS-WIRING (HEATED MIRROR) | ||
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
#SEBP31360676
211-2038: MIRROR GP-REAR VIEW
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 319-6791 | [1] | MIRROR AS (HEATED, LH) | ||
| 319-6790 | [1] | MIRROR AS (HEATED, RH) | ||
| (EACH MIRROR AS INCLUDES) | ||||
| 294-1993 | [1] | REFLECTOR | ||
| 319-6787 | [1] | COVER AS | ||
| 319-6786 | [2] | MIRROR AS-CONVEX (HEATED) | ||
| (EACH INCLUDES) | ||||
| 308-3843 | [1] | REFLECTOR | ||
| 319-6784 | [1] | COVER AS | ||
| 165-5979 | [1] | SWITCH AS-ROCKER (HEATED MIRROR) | ||
| 3E-8825 | [2] | LAMP (24-VOLT)(MINIATURE) | ||
| 3E-8857 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER) | ||
| 165-5980 | [1] | ACTUATOR | ||
| 236-5334 | [4] | WIRE AS | ||
| 4P-7581 | [5] | CLIP (LADDER) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [34] | STRAP-CABLE | ||
#SEBP31360677
211-7978: MIRROR GP-REAR VIEW
211-7978 MIRROR GP-REAR VIEW
S/N AXM1-594
PART OF 152-6927 INSTALLATION AR-MACHINE
S/N AXM1-594
PART OF 152-6927 INSTALLATION AR-MACHINE
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-8926 | [16] | WASHER (18.3X40X3.15-MM THK) | |
| 2. | 5P-6879 | [2] | MIRROR | |
| 3. | 7U-1903 | [2] | SUPPORT | |
| 4. | 108-7638 | [4] | SPACER (13.3X17.3X17.4-MM THK) | |
| 5. | 203-0780 | [2] | MIRROR | |
| 6. | 211-7972 | [2] | SUPPORT | |
| 7. | 8T-1887 | [8] | CLIP (SLOT) | |
| 8. | 8T-1888 | [8] | CLIP (TAB) | |
| 9. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 13. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 14. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| M | METRIC PART | |||
#SEBP31360678
211-7978: MIRROR GP-REAR VIEW
211-7978 MIRROR GP-REAR VIEW
S/N AXM595-1071
PART OF 152-6927 INSTALLATION AR-MACHINE
S/N AXM595-1071
PART OF 152-6927 INSTALLATION AR-MACHINE
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-8926 | [16] | WASHER (18.3X40X3.15-MM THK) | |
| 2. | 108-7638 | [4] | SPACER (13.3X17.3X17.4-MM THK) | |
| 3. | 222-7374 C | [2] | MIRROR-CONVEX | |
| (EACH INCLUDES) | ||||
| 308-3841 | [1] | REFLECTOR | ||
| 319-6784 | [1] | COVER AS | ||
| 4. | 235-2698 | [1] | MIRROR (LH) | |
| 5. | 236-2146 | [1] | MIRROR (RH) | |
| (EACH MIRROR INCLUDES) | ||||
| 308-3842 | [1] | REFLECTOR | ||
| 319-6787 | [1] | COVER AS | ||
| 6. | 222-5110 C | [2] | BRACKET AS-MIRROR | |
| 7. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 8. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP31360679
211-7978: MIRROR GP-REAR VIEW
211-7978 MIRROR GP-REAR VIEW
S/N AXM1072-UP
PART OF 152-6927 INSTALLATION AR-MACHINE
S/N AXM1072-UP
PART OF 152-6927 INSTALLATION AR-MACHINE
For full view, you need register
Parts for your 740 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-8926 | [16] | WASHER (18.3X40X3.15-MM THK) | |
| 2. | 108-7638 | [4] | SPACER (13.3X17.3X17.4-MM THK) | |
| 3. | 222-7374 | [2] | MIRROR-CONVEX | |
| (EACH INCLUDES) | ||||
| 308-3841 | [1] | REFLECTOR | ||
| 319-6784 | [1] | COVER AS | ||
| 4. | 235-2698 | [1] | MIRROR (LH) | |
| 5. | 236-2146 | [1] | MIRROR (RH) | |
| (EACH MIRROR INCLUDES) | ||||
| 308-3842 | [1] | REFLECTOR | ||
| 319-6787 | [1] | COVER AS | ||
| 6. | 242-8783 C | [2] | BRACKET AS-MIRROR | |
| 7. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 8. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
