440-1752 KIT-ENGINE OVERHAUL -TOP END FOR USE WITH @@@@@173-2948@@@@@, REHS8203 ALSO FIELD INSTALLATION 3512B

Part No	Qty	Parts name
440-0817 Y	[1]	KIT-ENGINE GASKET (OIL COOLER, LINES)
441-5230 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
355-0773 Y	[12]	KIT-GASKET (SINGLE CYLINDER HEAD)
439-0457 Y	[2]	KIT-TURBOCHARGER GASKET

4W-3027	[3]	BREATHER AS (CRANKCASE)
154-6389	[36]	BUTTON
275-2604	[3]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0755	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
4W-3100	[1]	GASKET
219-3240	[2]	REGULATOR-TEMPERATURE (30-DEG C)(WATER)
248-5513	[4]	REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)
6V-9027	[1]	SEAL-O-RING
8T-5452	[1]	SEAL-O-RING
033-6031	[3]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
238-5081	[6]	SEAL-O-RING
7N-6806	[4]	SEAL-RECTANGULAR
7N-4782	[24]	SPRING-LIFTER GUIDE
120-4339	[12]	WASHER-SPRING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
Y		SEPARATE ILLUSTRATION

#SEBP31370081

438-9575: KIT-REAR COVER GASKET

KIT-REAR COVER GASKET

438-9575 KIT-REAR COVER GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET PART NUMBER 309-4550 IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE SEALANT (FOR EUROPE, AFRICA, & MIDDLE EAST USE LOCTITE 5188). IN PLACE OF THE GASKET & MUST BE ORDERED SEPARATELY FROM LOCTITE.***
PART OF 440-1753 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@173-2948@@@@@
ALSO FIELD INSTALLATION

i05411157 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4H-7869	[3]	GASKET
7N-3368	[1]	GASKET (REAR)
7N-4320	[2]	GASKET
9L-2662	[1]	GASKET
252-8374	[2]	GASKET
4B-8407	[7]	GASKET-COPPER (FLYWHEEL HOUSING)
436-1479	[1]	SEAL-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)
234-8937	[2]	SEAL-INTEGRAL (FLYWHEEL HOUSING)
2J-6274	[1]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
5F-9657	[2]	SEAL-O-RING
6V-3348	[4]	SEAL-O-RING
7X-4805	[3]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

		****FLYWEEL HOUSING GASKET PART NUMBER 309-4550 IS NOT INCLUDED IN THIS KIT.
		CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE SEALANT (FOR EUROPE, AFRICA, & MIDDLE EAST USE LOCTITE 5188)
		IN PLACE OF THE GASKET & MUST BE ORDERED SEPARATELY FROM LOCTITE.****

#SEBP31370082

7E-6872: LIFTING GP-ENGINE

LIFTING GP-ENGINE

7E-6872 LIFTING GP-ENGINE

i00094469 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	150-7972	[2]	EYE AS-LIFTING
			(EACH INCLUDES)
	7N-2326	[1]	EYE-LIFTING
	7N-2328	[2]	DOWEL
	155-0726	[1]	BRACKET AS
	5P-8248	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
	5P-8291	[2]	BOLT (3/4-16X2-IN)
	6V-9995	[2]	BOLT-12 POINT HEAD (3/4-16X2.5-IN)
2.	516-8837	[1]	RETAINER (REAR)
3.	0S-0509	[4]	BOLT (3/8-16X0.75-IN)
4.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
5.	4P-4642	[1]	RETAINER-EYE (FRONT)

#SEBP31370083

206-6473: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

206-6473 MOUNTING GP-ALTERNATOR
S/N 2AF1-665
AN ATTACHMENT

i02294973 SEBP3137

2066473 MOUNTING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5211	[1]	SUPPORT-ALTERNATOR
2.	7E-4839	[1]	PULLEY (8-GROOVE)
3.	7E-4838	[1]	PULLEY
4.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
5.	141-7116	[1]	BELT-SERPENTINE (ALTERNATOR)
6.	252-6464	[1]	BLOCK
7.	252-6498	[1]	ROD
8.	0S-1571	[4]	BOLT (3/8-16X1.75-IN)
9.	235-2484	[1]	SEAL-LIP TYPE
10.	1A-0168	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4569	[1]	BOLT (1/2-13X4.25-IN)
13.	1D-4586	[1]	BOLT (5/8-11X3.5-IN)
14.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
15.	2J-3506	[2]	NUT-FULL (3/4-10-THD)
16.	3K-2889	[1]	LOCKNUT (5/8-11-THD)
17.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
19.	5P-8248	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
20.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)

#SEBP31370084

206-6473: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

206-6473 MOUNTING GP-ALTERNATOR
S/N 2AF666-UP
Type 1
AN ATTACHMENT

i02724837 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5211	[1]	SUPPORT-ALTERNATOR
2.	7E-4839	[1]	PULLEY (8-GROOVE)
3.	300-8570 C	[1]	PULLEY AS
	300-8567	[1]	SLEEVE
	300-8569	[1]	PULLEY (8-GROOVE)
4.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
5.	141-7116	[1]	BELT-SERPENTINE (ALTERNATOR)
6.	252-6464	[1]	BLOCK
7.	252-6498	[1]	ROD
8.	0S-1590 C	[4]	BOLT (3/8-16X2-IN)
9.	235-2484	[1]	SEAL-LIP TYPE
10.	1A-0168	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4569	[1]	BOLT (1/2-13X4.25-IN)
13.	1D-4586	[1]	BOLT (5/8-11X3.5-IN)
14.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
15.	2J-3506	[2]	NUT-FULL (3/4-10-THD)
16.	3K-2889	[1]	LOCKNUT (5/8-11-THD)
17.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
19.	5P-8248	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
20.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP31370085

206-6473: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

206-6473 MOUNTING GP-ALTERNATOR
S/N 2AF666-UP
Type 2
AN ATTACHMENT

i03907682 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5211	[1]	SUPPORT-ALTERNATOR
2.	7E-4839	[1]	PULLEY (8-GROOVE)
3.	471-1762	[1]	PULLEY AS
	300-8569	[1]	PULLEY (8-GROOVE)
	465-2689	[1]	SEAL-WEAR SLEEVE
4.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
5.	141-7116	[1]	BELT-SERPENTINE
6.	252-6464	[1]	BLOCK
7.	252-6498	[1]	ROD
8.	0S-1590	[4]	BOLT (3/8-16X2-IN)
9.	235-2484	[1]	SEAL-LIP TYPE
10.	1A-0168 C	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4569	[1]	BOLT (1/2-13X4.25-IN)
13.	1D-4586	[1]	BOLT (5/8-11X3.5-IN)
15.	2J-3506	[2]	NUT-FULL (3/4-10-THD)
16.	3K-2889	[1]	LOCKNUT (5/8-11-THD)
17.	5P-8245 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
19.	5P-8248	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
20.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP31370086

7E-4836: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

7E-4836 MOUNTING GP-ALTERNATOR
S/N 2AF1-403
AN ATTACHMENT

i00090736 SEBP3137

7E4836 MOUNTING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-4589	[1]	ROD
2.	4P-5211 C	[1]	SUPPORT-ALTERNATOR
3.	7E-4839	[1]	PULLEY (8-GROOVE)
4.	7E-4840	[1]	PULLEY AS
4A.	053-5065	[1]	SLEEVE
	7E-4838	[1]	PULLEY (8-GROOVE)
5.	141-7116	[1]	BELT-SERPENTINE (ALTERNATOR)
6.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
7.	8S-5383	[1]	BLOCK
8.	235-2484	[1]	SEAL-LIP TYPE
9.	0S-1571	[4]	BOLT (3/8-16X1.75-IN)
10.	1A-0168	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4586 C	[1]	BOLT (5/8-11X3.5-IN)
13.	1F-7958 C	[2]	NUT-FULL (1/2-13-THD)
14.	3K-2889 C	[1]	LOCKNUT (5/8-11-THD)
15.	4K-0367	[2]	NUT-FULL (5/8-11-THD)
16.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	5P-8247 C	[3]	WASHER-HARD (17X32X3.5-MM THK)
18.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)
19.	7D-9766	[1]	BOLT (1/2-13X4.25-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP31370087

7E-4836: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

7E-4836 MOUNTING GP-ALTERNATOR
S/N 2AF404-665
AN ATTACHMENT

i02188088 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	252-6498 C	[1]	ROD
2.	4P-5211	[1]	SUPPORT-ALTERNATOR
3.	7E-4839	[1]	PULLEY (8-GROOVE)
4.	7E-4840	[1]	PULLEY AS
4A.	053-5065	[1]	SLEEVE
	7E-4838	[1]	PULLEY (8-GROOVE)
5.	141-7116	[1]	BELT-SERPENTINE (ALTERNATOR)
6.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
7.	252-6464 C	[1]	BLOCK
8.	235-2484	[1]	SEAL-LIP TYPE
9.	0S-1571	[4]	BOLT (3/8-16X1.75-IN)
10.	1A-0168	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4586	[1]	BOLT (5/8-11X3.5-IN)
13.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
14.	3K-2889	[1]	LOCKNUT (5/8-11-THD)
15.	2J-3506 C	[2]	NUT-FULL (3/4-10-THD)
16.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	5P-8247 C	[1]	WASHER-HARD (17X32X3.5-MM THK)
18.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)
19.	7D-9766	[1]	BOLT (1/2-13X4.25-IN)
20.	5P-8248 C	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP31370088

7E-4836: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

7E-4836 MOUNTING GP-ALTERNATOR
S/N 2AF666-UP
AN ATTACHMENT

i02767099 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	252-6498	[1]	ROD
2.	4P-5211	[1]	SUPPORT-ALTERNATOR
3.	7E-4839	[1]	PULLEY (8-GROOVE)
4.	471-1762 C	[1]	PULLEY AS
	300-8569	[1]	PULLEY (8-GROOVE)
	465-2689	[1]	SEAL-WEAR SLEEVE
5.	141-7116	[1]	BELT-SERPENTINE (ALTERNATOR)
6.	7N-2597	[1]	SPACER (13.5X25.4X8.08-MM THK)
7.	252-6464	[1]	BLOCK
8.	235-2484	[1]	SEAL-LIP TYPE
9.	0S-1590 C	[4]	BOLT (3/8-16X2-IN)
10.	1A-0168	[1]	BOLT (1/2-13X7.5-IN)
11.	1A-1460	[2]	BOLT (1/2-13X2-IN)
12.	1D-4586	[1]	BOLT (5/8-11X3.5-IN)
14.	3K-2889	[1]	LOCKNUT (5/8-11-THD)
15.	2J-3506	[2]	NUT-FULL (3/4-10-THD)
16.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
18.	7B-3235	[2]	BOLT (1/2-13X1.375-IN)
19.	7D-9766	[1]	BOLT (1/2-13X4.25-IN)
20.	5P-8248	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP31370089

127-4462: PAN GP-OIL

PAN GP-OIL

127-4462 PAN GP-OIL -ENGINE
S/N 2AF1-649
FRONT SUMP
AN ATTACHMENT

i00813891 SEBP3137

For full view, you need register

Parts for your 3512B PETROLEUM ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-2029	[15]	BOLT (3/8-16X1.125-IN)
2.	8M-3175	[27]	WASHER-HARD (10.2X16X3-MM THK)
3.	1W-1568	[1]	PLATE
4.	5P-0076	[18]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
5.	188-4701	[1]	PAN-OIL
6.	1W-1563	[1]	HANDLE-OIL SCREEN
7.	3B-1915	[17]	BOLT (3/8-16X1.375-IN)
8.	5M-2894	[19]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	0L-1351	[1]	BOLT (3/8-16X0.875-IN)
10.	1W-1564	[1]	SCREEN AS-SUCTION (ENGINE OIL PAN)
11.	1N-3150	[1]	HOUSING-OIL SCREEN
12.	1N-4666	[1]	TUBE
13.	8S-9089	[2]	BOLT (1/2-13X4.5-IN)
14.	4B-2363	[1]	PLUG-OIL DRAIN (ENGINE OIL PAN)
15.	6F-4868	[1]	GASKET
16.	5P-5855	[38]	BOLT-12 POINT HEAD (1/2-13X1.75-IN)
17.	3H-7654	[38]	WASHER-HARD (13.5X22.5X3-MM THK)
18.	167-9585	[1]	PAN AS-OIL
18A.	101-2862	[2]	DOWEL
19.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
20.	8M-9024	[15]	WASHER-HARD (10.2X22.5X5-MM THK)
21.	1W-1565	[1]	ELBOW
22.	2M-9780	[2]	SEAL-O-RING
23.	6V-4314	[1]	SEAL-O-RING
24.	6V-4315	[2]	SEAL-O-RING
25.	310-3953	[4]	SEAL-O-RING
26.	6V-5101	[1]	SEAL-O-RING
27.	3P-0654	[2]	SEAL-O-RING
28.	1W-6114	[1]	TUBE
29.	7W-0117	[1]	ELBOW
30.	8T-6761	[3]	PLUG-PIPE (1-11-1/2 NPT THD)
31.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
33.	205-4776 B	[1]	COVER AS
34.	7E-2630	[1]	GASKET-OIL PAN
35.	142-4159	[1]	SEAL-INTEGRAL
36.	7X-7731	[1]	PLUG-PIPE (3/4-14-THD)
37.	6V-4314 B	[1]	SEAL-O-RING
38.	6I-0724	[1]	ADAPTER-PLUG
39.	6I-0723	[1]	PLUG-OIL DRAIN (ENGINE OIL PAN)
40.	5P-8068	[2]	SEAL-O-RING
41.	6V-0973	[1]	SEAL-O-RING
42.	0S-1571	[4]	BOLT (3/8-16X1.75-IN)
43.	9S-8752	[4]	NUT-FULL (3/8-16-THD)
44.	123-6906	[1]	ADAPTER
45.	0S-1588 B	[4]	BOLT (3/8-16X1.25-IN)
46.	4P-9853	[1]	BLOCK
47.	5M-2894 B	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED

Information:

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

Engine News

Improved Water Manifold Gaskets Are Used on Certain 3500 Engines {1124, 1380, 7555}
2013/10/17

Top End and Major Engine Overhaul Foundational Kits Are Available for 3512 Petroleum Engines {1000}
2013/10/31

A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}

Special Instruction

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

440-1752 Top End Engine Overhaul Foundational Kit for 3512B Engines{1000}
440-1752 Top End Engine Overhaul Foundational Kit for 3512B Engines{1000}

440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000}
440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000}

Technical Information Bulletin

Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Caterpillar Parts SIS Catalog 3512B :

441-5230 KIT-ENGINE GASKET

440-0817 KIT-ENGINE GASKET

440-0769 KIT-ENGINE GASKET

440-0757 KIT-ENGINE GASKET

355-0772 KIT-CYLINDER HEAD GASKET

553-4180 KIT-CYLINDER HEAD

452-9918 KIT-CYLINDER HEAD

4P-5426 HOUSING GP-FRONT

438-9575 KIT-REAR COVER GASKET

7E-6872 LIFTING GP-ENGINE

206-6473 MOUNTING GP-ALTERNATOR

7E-4836 MOUNTING GP-ALTERNATOR

Truck sale:

Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

182,189

Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH

Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY

190,000

Caterpillar 3512B, Stationary Generator Sets, Construction