AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-0095 CYLINDER HEAD GP S/N 8TL11-UP Type 1 3508 GEN SET ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
PAN GP-OIL
DRIVE GP-ACCESSORY

GEN SET ENGINE 3508 GEN SET ENGINE 8TL
 3508 Marine Generator Set Military 8TL00001-UP SEBP3139 3508 8TL   (1994)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
239-0690 CYLINDER HEAD GP
CYLINDER HEAD GP
335-6218 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
 

#SEBP31390040
 

4W-0095: CYLINDER HEAD GP

4W-0095 CYLINDER HEAD GP
S/N 8TL11-UP
Type 1
i00378126 SEBP3139
4W0095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 4W-9560 Y [1] CYLINDER HEAD GP  
3. 131-0420 C [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
6. 5B-0213 C [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 110-6991 [1] GASKET-CYLINDER HEAD  
9. 126-1113 [4] SEAL  
10. 126-1112 [4] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31390041
 

4W-0095: CYLINDER HEAD GP

4W-0095 CYLINDER HEAD GP
S/N 8TL11-UP
Type 2
i01178301 SEBP3139
4W0095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 172-0835 CY [1] CYLINDER HEAD GP  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 204-5426 [4] SEAL (WATER)  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 110-6991 [1] GASKET-CYLINDER HEAD  
9. 204-5427 [4] SEAL (WATER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31390042
 

4W-0095: CYLINDER HEAD GP

4W-0095 CYLINDER HEAD GP
S/N 8TL11-UP
Type 3
i02055129 SEBP3139
4W0095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 239-0690 CY [1] CYLINDER HEAD GP  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 204-5426 [4] SEAL (WATER)  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 204-5427 [4] SEAL (WATER)  
9. 110-6991 [1] GASKET-CYLINDER HEAD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31390043
 

4W-0095: CYLINDER HEAD GP

4W-0095 CYLINDER HEAD GP
S/N 8TL11-UP
Type 4
i03371926 SEBP3139
4W0095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 335-6218 CY [1] CYLINDER HEAD GP  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 420-0652 [4] SEAL AS-WATER  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 420-0653 [4] SEAL AS-WATER  
9. 110-6991 [1] GASKET-CYLINDER HEAD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31390044
 

4W-9560: CYLINDER HEAD GP

4W-9560 CYLINDER HEAD GP
S/N 8TL11-UP
PART OF 4W-0095 CYLINDER HEAD GP
i00566318 SEBP3139
4W9560 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 137-6856 [4] SEAL (VALVE STEM)  
3. 7E-4609 [2] VALVE-INLET (INTAKE)  
4. 7N-1902 [2] DOWEL  
5. 7N-1903 [4] SPRING-VALVE INNER  
6. 7N-1904 [4] SPRING-VALVE OUTER  
7. 131-0410 CY [1] CYLINDER HEAD AS  
8. 133-3814 [4] ROTOCOIL AS  
9. 133-9306 C [4] GUIDE-VALVE (STANDARD)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)  
10. 121-9839 [2] VALVE-EXHAUST  
11. 8T-6759 B [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31390045
 

8N-7182: DAMPER GP

8N-7182 DAMPER GP
i00090789 SEBP3139
8N7182 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0854 C [1] ADAPTER-DAMPER  
2. 193-3288 [1] DAMPER AS  
3. 8S-4757 [6] BOLT (1-14X8-IN)  
4. 5P-8250 [6] WASHER (28X49X5-MM THK)  
5. 7B-3235 [10] BOLT (1/2-13X1.375-IN)  
6. 2M-0849 [10] WASHER-HARD (13.5X25.5X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31390046
 

9Y-7876: DRAIN GP-ENGINE OIL

9Y-7876 DRAIN GP-ENGINE OIL -PAN
PART OF 109-3815 GENERAL AR
i00432576 SEBP3139
9Y7876 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-4868 [1] GASKET  
2. 7N-6511 [1] ADAPTER  
3. 1F-6660 [1] NIPPLE-PIPE  
4. 9B-4202 [1] VALVE-DRAIN (ENGINE OIL)  
5. 7X-7731 B [1] PLUG-PIPE (3/4-14-THD)  
  B   USE AS REQUIRED
 

#SEBP31390047
 

111-1735: DRIVE GP-ACCESSORY

111-1735 DRIVE GP-ACCESSORY
PART OF 109-3857 GOVERNOR GP
i01289007 SEBP3139
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-5279 [1] ADAPTER AS  
  127-5400 [1] BUSHING  
  7C-4165 [1] ADAPTER AS  
  127-5400 [1] BUSHING  
  0L-1352 [4] BOLT (3/8-16X3.25-IN)  
  0S-1594 [6] BOLT (3/8-16X1-IN)  
  0S-1595 [2] BOLT (1/2-13X1.25-IN)  
  2B-2695 [4] BOLT (5/16-18X0.875-IN)  
  5P-2546 [12] BOLT-12 POINT HEAD (7/16-14X1.25-IN)  
  6K-3772 [12] BOLT-12 POINT HEAD (7/16-14X2.25-IN)  
  8P-1438 [1] COVER  
  7J-8114 [1] GASKET  
  7N-5248 [1] GEAR-AUXILIARY DRIVE (63-TEETH)  
  7N-5875 [1] GEAR-AUXILIARY DRIVE (63-TEETH)  
  8T-6759 [1] PLUG-PIPE  
  8T-6757 [2] PLUG-PIPE  
  1T-0132 [1] SEAL-O-RING  
  2M-4453 [1] SEAL-O-RING  
  3B-8453 [1] SEAL-O-RING  
  8M-5255 [1] SEAL-O-RING  
  7N-5874 [1] SHAFT-AUXILIARY DRIVE (14-TEETH)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  7N-7539 [2] WASHER-THRUST  
 

#SEBP31390048
 

7N-4871: DRIVE GP-ACCESSORY

7N-4871 DRIVE GP-ACCESSORY -UPPER, RH
FOR USE WITH 900-1800 RPM
CANNOT BE USED WITH RIGHT HAND GOVERNOR
i00109485 SEBP3139
7N4871 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 B [1] PLUG-PIPE  
2. 6V-3348 [1] SEAL-O-RING  
3. 7N-5875 [1] GEAR-AUXILIARY DRIVE (63-TEETH)  
4. 7N-5248 [1] GEAR-AUXILIARY DRIVE (63-TEETH)  
5. 5P-0840 [1] SEAL-O-RING  
6. 7N-5874 [1] SHAFT-AUXILIARY DRIVE (14-TEETH)  
7. 5P-2546 [12] BOLT-12 POINT HEAD (7/16-14X1.25-IN)  
8. 259-4598 [1] SEAL-O-RING  
9. 7J-8114 [1] GASKET  
10. 8P-1438 C [1] COVER  
11. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
12. 8T-6759 [1] PLUG-PIPE  
13. 0S-1595 C [2] BOLT (1/2-13X1.25-IN)  
14. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 7C-4165 [1] ADAPTER AS  
15A. 127-5400 [1] BUSHING  
16. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
17. 7N-7539 [2] WASHER-THRUST  
18. 235-3546 [1] SEAL-O-RING  
19. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
20. 7N-5279 [1] ADAPTER AS  
20A. 127-5400 [1] BUSHING  
21. 6K-3772 [12] BOLT-12 POINT HEAD (7/16-14X2.25-IN)  
22. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
23. 8T-6757 [1] PLUG-PIPE  
24. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31390049
 

8N-5678: DRIVE GP-ACCESSORY

8N-5678 DRIVE GP-ACCESSORY -LOWER, LH
LOW SPEED, STANDARD ROTATION
PART OF 109-3815 GENERAL AR
i00431502 SEBP3139
8N5678 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7320 [1] GEAR-ACCESSORY DRIVE (46-TEETH)  
2. 5R-7136 C [2] WASHER-SEALING  
3. 5R-7137 C [2] WASHER-SEALING  
4. 7C-3258 C [1] WASHER AS-THRUST  
  7N-2047 [1] DOWEL  
5. 7C-3259 C [1] SHAFT  
6. 7N-5279 [1] ADAPTER AS  
  127-5400 [1] BUSHING  
7. 7N-5874 [1] SHAFT-AUXILIARY DRIVE (14-TEETH)  
8. 7N-7539 [2] WASHER-THRUST  
9. 7N-8374 [2] COVER-PUMP  
10. 441-3369 [1] ADAPTER AS  
  127-5400 [1] BUSHING  
11. 116-3242 [1] GEAR AS-IDLER (66-TEETH)  
  116-1365 [1] BUSHING  
12. 235-3546 [1] SEAL-O-RING  
13. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
14. 0S-1592 [4] BOLT (5/8-11X1.25-IN)  
15. 6V-8260 [1] SEAL-O-RING  
16. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
17. 1T-0765 [6] BOLT (3/8-16X1-IN)  
18. 259-4598 [2] SEAL-O-RING  
19. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
20. 5M-2894 C [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 5P-0840 [1] SEAL-O-RING  
22. 5P-8245 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
24. 6V-3348 [1] SEAL-O-RING  
25. 8T-6757 [2] PLUG-PIPE  
26. 8T-6759 [2] PLUG-PIPE  
27. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 9X-7371 [1] SEAL-O-RING  
29. 1D-4572 [2] BOLT (1/2-13X5.5-IN)  
30. 6K-3771 B [12] BOLT-12 POINT HEAD (7/16-14X1.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Checking Or Adjusting Valve Clearances
1986/01/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2014/01/13
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
Cat® Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3508 :

CYLINDER HEAD GP
335-6218 CYLINDER HEAD GP
CYLINDER HEAD GP
239-0690 CYLINDER HEAD GP
CYLINDER HEAD GP
172-0835 CYLINDER HEAD GP
CYLINDER HEAD GP
151-2777 CYLINDER HEAD GP
CYLINDER HEAD GP
151-2776 CYLINDER HEAD GP
CYLINDER HEAD GP
101-1265 CYLINDER HEAD GP
CYLINDER HEAD GP
101-1264 CYLINDER HEAD GP
CYLINDER HEAD AS
242-5327 CYLINDER HEAD AS
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
DAMPER GP
8N-7182 DAMPER GP
DRAIN GP-ENGINE OIL
9Y-7876 DRAIN GP-ENGINE OIL
111-1735 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.