AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-INLETMUFFLER GP
INLET GP-AIR
EXHAUST GP
TURBOCHARGER GP
AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-INLET
#SEBP31480130
189-8780: COVER GP-AIR INLET
189-8780 COVER GP-AIR INLET -STARTING AID HEATER
S/N BMA37896-UP
PART OF 212-0765, 235-4131, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N BMA37896-UP
PART OF 212-0765, 235-4131, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS#SEBP31480131
288-0973: COVER GP-AIR INLET
288-0973 COVER GP-AIR INLET -STARTING AID HEATER
S/N BMA14386-37895
24-VOLT
PART OF 189-8780 COVER GP-AIR INLET
ALSO AN ATTACHMENT
S/N BMA14386-37895
24-VOLT
PART OF 189-8780 COVER GP-AIR INLET
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS#SEBP31480132
294-7675: COVER GP-AIR INLET
294-7675 COVER GP-AIR INLET -STARTING AID HEATER
S/N BMA37896-UP
PART OF 189-8780 COVER GP-AIR INLET
ALSO AN ATTACHMENT
S/N BMA37896-UP
PART OF 189-8780 COVER GP-AIR INLET
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS#SEBP31480133
183-8209: DRAIN GP-MUFFLER
183-8209 DRAIN GP-MUFFLER
S/N CRB1-UP; CSJ1-UP
PART OF 201-3759 INSTALLATION AR-ENGINE
S/N CRB1-UP; CSJ1-UP
PART OF 201-3759 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 096-0061 | [2] | STRAP-CABLE | |
| 2. | 5P-1442 E | HOSE (78-CM) | ||
| 3. | 5P-4961 | [1] | CLAMP-HOSE | |
| 4. | 183-8210 | [1] | PIPE AS | |
| (INCLUDES FITTING) | ||||
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 7. | 171-9073 | [1] | CLIP | |
| 8. | 178-6626 | [1] | SUPPORT AS | |
| 116-0118 | [1] | CLIP | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP31480134
235-2658: DRAIN GP-MUFFLER
235-2658 DRAIN GP-MUFFLER
S/N CRB1519-UP; CSJ1385-UP
PART OF 201-3759 INSTALLATION AR-ENGINE
S/N CRB1519-UP; CSJ1385-UP
PART OF 201-3759 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-5390 | [1] | PLUG (3/8-18-THD)(MUFFLER) |
#SEBP31480135
194-1683: ELBOW GP-AIR INLET
194-1683 ELBOW GP-AIR INLET
S/N BMA1-14385
PART OF 188-6123, 212-0765, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N BMA1-14385
PART OF 188-6123, 212-0765, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-8846 B | SEALANT-GASKET | ||
| 2. | 7S-6369 | [1] | WASHER (0.344X0.75X0.188-IN THK) | |
| 3. | 137-6726 M | [1] | STUD (M8X1.25X110-MM) | |
| 4. | 155-4909 | [1] | ELBOW | |
| 5. | 6V-3821 M | [6] | BOLT (M8X1.25X110-MM) | |
| 6. | 148-8395 | [1] | PLUG AS | |
| 6A. | 3K-0360 | [1] | SEAL-O-RING | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 7. | 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP31480136
244-1491: ELBOW GP-AIR INLET
244-1491 ELBOW GP-AIR INLET
S/N BMA15780-UP
PART OF 212-0765, 235-4131, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N BMA15780-UP
PART OF 212-0765, 235-4131, 242-2596 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 347-5684 | [1] | PLATE-SPACER | |
| 2. | 7S-6369 | [1] | WASHER (0.344X0.75X0.188-IN THK) | |
| 3. | 137-6726 M | [1] | STUD (M8X1.25X110-MM) | |
| 4. | 155-4909 | [1] | ELBOW | |
| 5. | 398-5596 | [1] | PLUG AS | |
| 238-5080 | [1] | SEAL-O-RING | ||
| 360-3680 | [1] | PLUG | ||
| 6. | 6V-3821 M | [7] | BOLT (M8X1.25X110-MM) | |
| 7. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP31480137
340-1882: FILTER & MTG GP-EXHAUST
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-3870 | [1] | CLAMP-MUFFLER | |
| 2. | 7S-8735 | [1] | CLAMP | |
| 3. | 319-8938 | [2] | CLAMP AS | |
| 4. | 319-8941 | [1] | SUPPORT AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 319-8938 | [2] | CLAMP AS | ||
| 5. | 319-8943 | [1] | COVER | |
| 6. | 319-8944 | [1] | TUBE-EXHAUST | |
| 7. | 331-1686 Y | [1] | FILTER GP-DIESEL PARTICULATE | |
| 8. | 1W-2431 | [1] | CLAMP-BAND | |
| 9. | 216-5453 M | [4] | BOLT (M12X1.75X70-MM) | |
| 10. | 255-2899 | [1] | PIPE AS-TAIL | |
| 11. | 3B-4508 | [4] | LOCKWASHER | |
| 12. | 6V-2370 | [10] | RIVET-POP | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 16. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31480138
331-1686: FILTER GP-DIESEL PARTICULATE
331-1686 FILTER GP-DIESEL PARTICULATE
S/N CRB1-UP
PART OF 340-1882 FILTER & MTG GP-EXHAUST
S/N CRB1-UP
PART OF 340-1882 FILTER & MTG GP-EXHAUST
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-7992 | [3] | CLAMP | |
| 2. | 216-7993 | [3] | GASKET (EXHAUST FILTER) | |
| 3. | 301-3136 | [1] | MODULE-INLET | |
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 241-6170 | [1] | PLUG | ||
| 4. | 319-8936 | [1] | MODULE AS-OUTLET | |
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 5. | 336-2358 | [1] | MODULE AS-CATALYST | |
| 6. | 336-2360 | [1] | FILTER AS-DIESEL PARTICULATE |
#SEBP31480139
453-2215: KIT-TURBOCHARGER GASKET
453-2215 KIT-TURBOCHARGER GASKET
S/N CRB1-UP; CSJ1-UP
KIT CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, WASHERS, STUDS, SPACERS ETC.. APPLIES TO TURBO KIT PART NUMBER 317-8751 - UP
FIELD INSTALLATION
S/N CRB1-UP; CSJ1-UP
KIT CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, WASHERS, STUDS, SPACERS ETC.. APPLIES TO TURBO KIT PART NUMBER 317-8751 - UP
FIELD INSTALLATION
For full view, you need register
Parts for your 325C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7C-7431 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 3P-1156 | [1] | SEAL-O-RING | ||
| 112-3540 | [1] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-7089 | [2] | SEAL-O-RING | ||
| 295-5609 | [1] | SEAL-O-RING | ||
| 418-6781 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | ||
| M | METRIC PART | |||
Information:
AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-INLET
Specifications
Disassembly and Assembly
Caterpillar Parts SIS Catalog 325C :
Truck sale:
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
- Crawler excavators
WESTERN STATES EQUIPMENT
270,965