227-7068 WIRING GP-CHASSIS -MACHINE SECURITY S/N CAP1-UP; CGZ1-UP Type 2 AN ATTACHMENT 330C L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 227-7068 WIRING GP-
1. 221-1024 WIRING GP-
2. 221-1024 WIRING GP-
3. 170-6909 WIRING GP-
4. 186-4572 WIRING GP-
5. 186-4572 WIRING GP-
6. 186-4628 WIRING GP-
7. 204-3604 WIRING GP-
8. 204-3604 WIRING GP-
9. 204-3604 WIRING GP-
0. INFORMATION

EXCAVATOR 330C L EXCAVATOR CAP
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3149 330C L CAP (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

193-3393 WIRING GP-CHASSIS

227-7068 WIRING GP-CHASSIS

221-1024 WIRING GP-COLD WEATHER

170-6909 WIRING GP-CONSOLE

#SEBP31490320

227-7068: WIRING GP-CHASSIS

WIRING GP-CHASSIS

227-7068 WIRING GP-CHASSIS -MACHINE SECURITY
S/N CAP1-UP; CGZ1-UP
Type 2
AN ATTACHMENT

i02387100 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[33]	STRAP-CABLE
2.	237-7926	[1]	HARNESS AS-CHASSIS
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[8]	STRAP-CABLE
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	3S-2093	[5]	STRAP-CABLE
4.	224-2928	[1]	HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	222-3870	[1]	COIL AS (FERRITE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
6.	227-7094	[1]	SHEET AS
7.	8T-4191 M	[4]	BOLT (M10X1.5X16-MM)
8.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
9.	207-5262 CY	[1]	ELECTRONICS GP-MACHINE (SECURITY)
10.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
11.	7X-0818 M	[3]	BOLT (M8X1.25X45-MM)
12.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
13.	155-0576	[6]	MOUNT-ISOLATION
14.	6I-1418	[3]	SPACER (8.2X12.7X28.7-MM THK)
15.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
16.	111-4837	[1]	CLIP
17.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
18.	224-2926	[1]	HARNESS AS-CAB (SIDE PANEL, RH)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
19.	225-5927 C	[1]	FILM-INSTRUCTION (MACHINE SECURITY, READ OMM)
20.	224-2930	[1]	BRACKET AS
21.	111-4836	[6]	CLIP
22.	149-5050	[1]	RELAY (24-VOLT)(MAIN RELAY)
22A.	149-5050	[1]	RELAY (24-VOLT)(NEUTRAL START)
23.	7X-2619 M	[3]	BOLT (M6X1X10-MM)
24.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
25.	237-5693	[1]	HARNESS AS-CONSOLE (RH)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[8]	STRAP-CABLE
	7K-1181	[1]	STRAP-CABLE
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
26.	163-6795	[1]	STRAP-CABLE
27.	224-2929	[1]	COVER AS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	165-5655	[1]	LAMP AS (24-VOLT)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
28.	224-2934	[1]	PANEL
29.	6V-5210 M	[4]	SCREW-MACHINE (M4X0.7X10-MM)
30.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
31.	206-5208	[1]	COIL AS (EXCITER)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31490321

221-1024: WIRING GP-COLD WEATHER

WIRING GP-COLD WEATHER

221-1024 WIRING GP-COLD WEATHER
S/N CAP1-UP; CGZ1-UP
PART OF 220-1889 COLD WEATHER AR
Type 1
AN ATTACHMENT

i01787661 SEBP3149

2211024 WIRING GP-COLD WEATHER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	221-5175	[1]	HARNESS AS-CHASSIS
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[4]	KIT-RECEPTACLE (6-PIN)
	102-8801	[4]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[15]	STRAP-CABLE
	8T-8827	[2]	BOOT (RED)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	153-2630	[1]	PLUG AS-CONNECTOR (54-PIN, BROWN)
	163-6759	[1]	SEAL
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL )
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
2.	222-7736	[1]	PANEL GP-WIRING
3.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
4.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
5.	116-0118	[1]	CLIP
6.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
7.	222-0669	[1]	HARNESS AS-STARTING AID
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE& INTERFACE SEAL)
8.	7K-1181	[10]	STRAP-CABLE
9.	3E-6455	[1]	SWITCH AS-PRESSURE (ENGINE OIL PRESSURE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	9X-9730	[2]	BATTERY GP (12-VOLT)
			(EACH INCLUDES)
	7N-0060	[6]	VENT AS
11.	9X-2028 M	[4]	BOLT (M8X1.25X220-MM)
12.	219-6234	[1]	PLATE AS
13.	220-0372	[1]	PLATE
14.	222-8994	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(325-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)(STARTING MOTOR)
	8N-1725	[1]	COVER AS-TERMINAL (RED)(BATTERY)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
15.	161-3115	[1]	COVER
16.	161-3117	[2]	KNOB AS
			(EACH INCLUDES)
	7X-2533 M	[1]	BOLT (M6X1X35-MM)
17.	4I-5049 M	[2]	NUT-SPACER (M6X1-THD)
18.	8T-5005 M	[6]	BOLT (M10X1.5X70-MM)
19.	7X-7729	[6]	WASHER (11X25X3-MM THK)
20.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
21.	222-0858	[1]	SUPPORT AS
22.	7K-1181 B	[27]	STRAP-CABLE
23.	231-7966	[1]	HARNESS AS-WIRING (FUEL HEATER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
		[1]	PLUG AS
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP31490322

221-1024: WIRING GP-COLD WEATHER

WIRING GP-COLD WEATHER

221-1024 WIRING GP-COLD WEATHER
S/N CAP1-UP; CGZ1-UP
PART OF 220-1889 COLD WEATHER AR
Type 2
AN ATTACHMENT

i02326384 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8V-0622	[1]	CABLE AS-BATTERY
	5P-0761 E		CABLE (00-GA, RED)(14-CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
			(EACH COVER-TERMINAL INCLUDES)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
			(EACH TERMINAL AS-BATTERY INCLUDES)
	1M-6119	[2]	BOLT (5/16-18X1.375-IN)
	1M-6120	[2]	NUT (5/16-18-THD)
2.	222-7736	[1]	PANEL GP-WIRING
3.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
4.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
5.	116-0118	[1]	CLIP
6.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
7.	222-0669	[1]	HARNESS AS-STARTING AID
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	7K-1181 B	[10]	STRAP-CABLE
9.	3E-6455	[1]	SWITCH AS-PRESSURE (ENGINE OIL PRESSURE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	9X-9730	[2]	BATTERY GP (12-VOLT)
			(EACH INCLUDES)
	7N-0060	[6]	VENT AS
11.	9X-2028 M	[4]	BOLT (M8X1.25X220-MM)
12.	219-6234	[1]	PLATE AS
13.	220-0372	[1]	PLATE
14.	222-8994	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(325-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)(STARTING MOTOR)
	8N-1725	[1]	COVER AS-TERMINAL (RED)(BATTERY)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
15.	161-3115	[1]	COVER
16.	161-3117	[2]	KNOB AS
			(EACH INCLUDES)
	7X-2533 M	[1]	BOLT (M6X1X35-MM)
17.	4I-5049 M	[2]	NUT-SPACER (M6X1-THD)
18.	8T-5005 M	[6]	BOLT (M10X1.5X70-MM)
19.	7X-7729	[6]	WASHER (11X25X3-MM THK)
20.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
21.	222-0858	[1]	SUPPORT AS
22.	7K-1181 B	[27]	STRAP-CABLE
23.	231-7966	[1]	HARNESS AS-WIRING (FUEL HEATER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
		[1]	PLUG AS
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP31490323

170-6909: WIRING GP-CONSOLE

WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE -LH
S/N CAP1-UP; CGZ1-UP
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

i01240043 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-6959	[1]	HARNESS AS-OPERATOR CONTROLS (CONSOLE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[5]	STRAP-CABLE
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
2.	7K-1181	[1]	STRAP-CABLE
3.	163-6795	[1]	STRAP-CABLE
4.	3S-2093	[1]	STRAP-CABLE

#SEBP31490324

186-4572: WIRING GP-CONSOLE

WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE -RH
S/N CAP1-742; CGZ1-358
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

i01481245 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-6795	[1]	STRAP-CABLE
2.	6V-5738 D		TRIM-EDGE (0.2-M)
3.	163-6710	[1]	SWITCH AS-TOGGLE (AEC AUTO/MANUAL)
4.	163-6711	[1]	SWITCH AS-TOGGLE (BACK-UP THROTTLE)
5.	224-5059	[1]	HARNESS AS-CONSOLE (RH)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801		KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
7.	163-6702	[1]	PANEL AS
	170-9324	[1]	LAMP AS-INDICATOR (24-VOLT, 3-WATT)
9.	106-0107 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
10.	170-6828	[1]	HARNESS AS-SWITCH (ENGINE START)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	3S-2093	[3]	STRAP-CABLE
13.	7K-1181	[2]	STRAP-CABLE
14.	185-9208	[1]	KNOB AS
	D		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP31490325

186-4572: WIRING GP-CONSOLE

WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE -RH
S/N CAP743-UP; CGZ359-UP
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

i02218394 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-6795	[1]	STRAP-CABLE
2.	6V-5738 D		TRIM-EDGE (0.2-M)
3.	283-3074	[1]	SWITCH AS-TOGGLE (AEC AUTO/MANUAL)
4.	163-6711	[1]	SWITCH AS-TOGGLE (BACK-UP THROTTLE)
5.	231-5805 C	[1]	HARNESS AS-CONSOLE (RH)
	3S-2093	[11]	STRAP-CABLE
	7K-1181	[1]	STRAP-CABLE
	7Y-3957	[1]	CONNECTOR-PLUG (4-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
7.	200-2555 C	[1]	PANEL
8.	200-2556 C	[1]	PLATE
9.	106-0107 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
10.	170-6828	[1]	HARNESS AS-SWITCH (ENGINE START)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	3S-2093	[2]	STRAP-CABLE
13.	7K-1181	[2]	STRAP-CABLE
14.	185-9208	[1]	KNOB AS (THROTTLE POSITION)
15.	8T-4223 C	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	097-5812 C	[1]	SPACER (26X32X2-MM THK)
17.	220-5815 C	[6]	SCREW-PAN HEAD
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP31490326

186-4628: WIRING GP-CONSOLE

WIRING GP-CONSOLE

186-4628 WIRING GP-CONSOLE
S/N CAP1-UP; CGZ1-UP
PART OF 202-7330, 206-8076, 216-4316, 216-8884, 255-0557 OPERATOR AR
ALSO AN ATTACHMENT

i01480783 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
170-6909 Y	[1]	WIRING GP-CONSOLE (LH)
186-4572 Y	[1]	WIRING GP-CONSOLE (RH)
Y		SEPARATE ILLUSTRATION

#SEBP31490327

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF1-4114; 7AZ120-UP
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT

i01538036 SEBP3149

2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	6V-4369	[1]	CLIP
3.	003-9835	[2]	PROTECTOR
4.	110-8457	[1]	BOOT
5.	112-6646 M	[1]	LOCKNUT (M6X1-THD)
6.	148-0757	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
7.	147-0286	[1]	WIRE AS
8.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
9.	201-1283	[1]	HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)
	214-7170 J	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
			(INCLUDES:)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	194-5226	[7]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
11.	4P-7428	[1]	CLIP (LADDER)
12.	4P-7429	[1]	CLIP (LADDER)
13.	4P-7581	[4]	CLIP (LADDER)
14.	4P-8134	[1]	CLIP (LADDER)
15.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
18.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
19.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
20.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
21.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
22.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
23.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
24.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	J		KIT MARKED "J" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART

#SEBP31490328

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF4115-5892; 7AZ120-UP
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT

i01844193 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
4.	201-1283	[1]	HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	194-5226	[8]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			INCLUDES WEDGE & RECEPTACLE
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			INCLUDES WEDGE & RECEPTACLE
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
5.	223-4453 C	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
6.	117-7032 C	[1]	WIRE AS
7.	193-9141 C	[2]	COVER-TERMINAL
8.	3E-4353 C	[2]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7428	[1]	CLIP (LADDER)
10.	4P-7429	[1]	CLIP (LADDER)
11.	4P-7581	[4]	CLIP (LADDER)
12.	4P-8134	[1]	CLIP (LADDER)
13.	6V-4369	[1]	CLIP
14.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
15.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART

#SEBP31490329

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF5893-7985; 7AZ120-UP
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT

i01985697 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[24]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[5]	RECEPTACLE AS
4.	226-0903 C	[1]	CABLE AS
5.	230-6279 C	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	194-5226	[8]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	8T-8737	[35]	PLUG-SEAL
	3S-2093	[3]	STRAP-CABLE
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
7.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7581 C	[5]	CLIP (LADDER)
9.	4P-8134 C	[3]	CLIP (LADDER)
10.	5P-7970 CM	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[3]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[4]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 CM	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines

Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader

Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader

Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader

Engine Wiring Information
C-9 Engine for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C L :

227-7068 WIRING GP-CHASSIS

193-3393 WIRING GP-CHASSIS

255-0567 WIRING GP-CAB

235-8317 WIRING GP-CAB

235-1748 WIRING GP-CAB

221-1024 WIRING GP-COLD WEATHER

170-6909 WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE

186-4628 WIRING GP-CONSOLE

204-3604 WIRING GP-ELECTRONIC CONTROL

Truck sale:

Caterpillar 330C L
- Crawler Excavators
MADISA

55,000

Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.

48,000

Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT

Caterpillar 330CL
- Crawler Excavators
MILTON CAT