AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-0146 DOOR GP-ACCESS -AIR CLEANER, BATTERY, RADIATOR S/N CAP1-UP; CGZ1-UP PART OF 190-7171 DOOR GP-ACCESS AN ATTACHMENT 330C L


FRAME AND BODY
DOOR GP
FENDER GP
FRAME GP
GEAR & BEARING GP

EXCAVATOR 330C L EXCAVATOR CAP
 330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3149 330C L CAP   (2001)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
190-7171 DOOR GP-ACCESS
DOOR GP-ACCESS
193-9396 DOOR GP-ACCESS
DOOR GP-ACCESS
193-9399 DOOR GP-ACCESS
DOOR GP-ACCESS
199-0146 DOOR GP-ACCESS
 

#SEBP31490370
 

199-0146: DOOR GP-ACCESS

199-0146 DOOR GP-ACCESS -AIR CLEANER, BATTERY, RADIATOR
S/N CAP1-UP; CGZ1-UP
PART OF 190-7171 DOOR GP-ACCESS
AN ATTACHMENT
i01539024 SEBP3149
1990146 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-6418 M [4] NUT (M6X1-THD)  
2. 122-4101 [1] RUBBER  
3. 298-2942 J [1] LATCH AS  
4. 177-6395 [1] LINER  
5. [1] DOOR AS  
  165-2976 [2] HINGE  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP31490371
 

190-7175: FENDER & COVER GP

190-7175 FENDER & COVER GP
S/N CAP1-UP; CGZ1-UP
PART OF 186-1264, 186-1265 CHASSIS AR
i01520535 SEBP3149
1907175 FENDER & COVER GP Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-2986 [2] GROMMET  
2. 193-9310 [1] COVER  
3. 193-9763 [1] STEP AS  
4. 135-8573 [2] BOLT AS  
5. 135-8575 [4] BOLT AS  
6. 7Y-2853 [2] SPACER (13X38X5-MM THK)  
 

#SEBP31490372
 

220-5806: FRAME AR-UPPER

220-5806 FRAME AR-UPPER -REINFORCED SKIRTS
S/N CAP1-UP; CGZ1-UP
AN ATTACHMENT
i02072686 SEBP3149
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  220-5808 Y [1] FRAME GP-UPPER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490373
 

242-8735: FRAME AR-UPPER

242-8735 FRAME AR-UPPER
S/N CAP1-UP
AN ATTACHMENT
i02355687 SEBP3149
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  201-2783 Y [1] BUMPER GP  
    S/N CAP1-1257
  231-6966 Y [1] BUMPER GP (WITH SIDE BUMPER)  
    S/N CAP1258-UP
   
  231-6895 [1] FRAME AS-UPPER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490374
 

189-4094: FRAME GP-UPPER

189-4094 FRAME GP-UPPER
S/N CAP1-1257; CGZ1-541
PART OF 186-1264, 186-1265 CHASSIS AR
i01520539 SEBP3149
1894094 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0364 [2] SPACER (103X140X12-MM THK)  
2. 096-6467 [2] WASHER (22X60X8-MM THK)  
3. 189-4095 [1] FRAME AS  
3A. 7Y-1113 [1] BOSS  
3B. 163-3729 [1] STEP AS  
4. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
5. 7X-2572 M [1] BOLT (M24X3X35-MM)  
6. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
7. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
8. 166-1488 B [4] SHIM (2-MM THK)  
9. 192-8416 [1] PIN AS  
10. 117-5435 [2] PIN AS  
11. 201-2771 [1] WASHER (26X90X8-MM THK)  
12. 166-1490 B [2] SHIM (2-MM THK)  
13. 147-3957 B [1] SHIM (0.5-MM THK)  
  093-0106 B [1] SHIM (2-MM THK)  
  093-0074 B [2] SHIM (1-MM THK)  
14. 187-7661 [1] BUMPER AS  
15. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31490375
 

220-5808: FRAME GP-UPPER

220-5808 FRAME GP-UPPER
S/N CAP1-UP; CGZ1-UP
PART OF 220-5806 FRAME AR-UPPER
AN ATTACHMENT
i02111455 SEBP3149
2205808 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0364 [2] SPACER (103X140X12-MM THK)  
2. 096-6467 [2] WASHER (22X60X8-MM THK)  
3. 231-6891 [1] FRAME AS-UPPER  
3A. 7Y-1113 [1] BOSS  
3B. 163-3729 [1] STEP AS  
4. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
5. 7X-2572 M [1] BOLT (M24X3X35-MM)  
6. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
7. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
8. 166-1488 B [4] SHIM (2-MM THK)  
9. 250-2436 [1] PIN AS  
10. 117-5435 [2] PIN AS  
11. 201-2771 [1] WASHER (26X90X8-MM THK)  
12. 166-1490 B [2] SHIM (2-MM THK)  
13. 147-3957 B [1] SHIM (0.5-MM THK)  
14. 093-0106 B [1] SHIM (2-MM THK)  
15. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
17. 187-7661 [1] BUMPER AS  
18. 093-0074 B [2] SHIM (1-MM THK)  
19. 093-0090 B [4] SHIM (1-MM THK)  
20. 133-2427 B [2] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31490376
 

231-6964: FRAME GP-UPPER

231-6964 FRAME GP-UPPER
S/N CAP1258-UP; CGZ542-UP
PART OF 186-1264, 186-1265 CHASSIS AR
i02206937 SEBP3149
2316964 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0364 [2] SPACER (103X140X12-MM THK)  
2. 096-6467 [2] WASHER (22X60X8-MM THK)  
3. 231-6891 [1] FRAME AS-UPPER  
3A. 7Y-1113 [1] BOSS  
3B. 163-3729 [1] STEP AS  
4. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
5. 7X-2572 M [1] BOLT (M24X3X35-MM)  
6. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
7. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
8. 166-1488 [4] SHIM (2-MM THK)  
9. 250-2436 [1] PIN AS  
10. 117-5435 [2] PIN AS  
11. 201-2771 [1] WASHER (26X90X8-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 147-3957 B [1] SHIM (0.5-MM THK)  
14. 093-0106 B [1] SHIM (2-MM THK)  
15. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
17. 187-7661 [1] BUMPER AS  
18. 093-0074 B [2] SHIM (1-MM THK)  
19. 093-0090 B [4] SHIM (1-MM THK)  
20. 133-2427 B [2] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31490377
 

191-2527: GEAR & BEARING GP-SWING

191-2527 GEAR & BEARING GP-SWING
S/N CAP1-1734; CGZ1-698
PART OF 186-1274, 193-6869 FRAME AR-UNDERCARRIAGE
i01521271 SEBP3149
1912527 GEAR & BEARING GP-SWING Parts scheme 1912527 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
2. 7Y-1095 [1] DOWEL  
3. 199-4523 [1] TUBE AS (RH)  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
6. 4N-9170 [4] CLIP (LOOP)  
7. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
8. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
9. 7Y-1649 [1] BOOT  
10. 7Y-1650 [1] CLAMP-HOSE  
11. 093-0543 [1] RETAINER  
12. 148-4704 [1] GASKET  
13. 148-4703 [1] COVER  
14. 7Y-1648 [1] STRIP  
15. 7Y-1647 [1] GASKET  
16. 1U-8846 B SEALANT-GASKET  
17. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
18. 199-4524 [1] TUBE AS (LH)  
19. 112-3930 M [42] BOLT (M24X3X140-MM)  
20. 6C-9140 [46] SPACER  
21. 112-3931 M [46] BOLT (M24X3X120-MM)  
22. 2B-7561 [2] CORK  
23. 199-4558 Y [1] GEAR & BEARING GP-SWING  
24. 8T-4167 [42] WASHER-HARD (26X44X4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490378
 

191-2527: GEAR & BEARING GP-SWING

191-2527 GEAR & BEARING GP-SWING
S/N CAP1735-UP; CGZ699-UP
PART OF 186-1274, 193-6869 FRAME AR-UNDERCARRIAGE
i02283867 SEBP3149
1912527 GEAR & BEARING GP-SWING Parts scheme 1912527 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
2. 7Y-1095 [1] DOWEL  
3. 199-4523 [1] TUBE AS (RH)  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
6. 4N-9170 [4] CLIP (LOOP)  
7. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
8. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
9. 7Y-1649 [1] BOOT  
10. 7Y-1650 [1] CLAMP-HOSE  
11. 093-0543 [1] RETAINER  
12. 148-4704 [1] GASKET  
13. 148-4703 [1] COVER  
14. 7Y-1648 [1] STRIP  
15. 7Y-1647 [1] GASKET  
16. 1U-8846 B SEALANT-GASKET  
17. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
18. 199-4524 [1] TUBE AS (LH)  
19. 112-3930 M [42] BOLT (M24X3X140-MM)  
20. 6C-9140 [46] SPACER  
21. 112-3931 M [46] BOLT (M24X3X120-MM)  
22. 2B-7561 [2] CORK  
23. 227-6089 Y [1] GEAR & BEARING GP-SWING  
24. 8T-4167 [42] WASHER-HARD (26X44X4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490379
 

191-2528: GEAR & BEARING GP-SWING

191-2528 GEAR & BEARING GP-SWING
S/N CAP1-1734; CGZ1-698
PART OF 199-4558 GEAR & BEARING GP-SWING
i02284075 SEBP3149
1912528 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [92] ROLLER  
2. Z [32] SEPARATOR  
3. Z [60] SEPARATOR  
4. Z [1] RACE AS-OUTER  
5. Z [1] RACE-BEARING  
6. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
7. 148-4685 BE SEAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

Information:

Caterpillar Parts SIS Catalog 330C L :

DOOR GP-ACCESS
193-9399 DOOR GP-ACCESS
DOOR GP-ACCESS
193-9396 DOOR GP-ACCESS
DOOR GP-ACCESS
190-7171 DOOR GP-ACCESS
COVER GP-STORAGE BOX
168-1550 COVER GP-STORAGE BOX
COVER GP-HOOD
208-4092 COVER GP-HOOD
COUNTERWEIGHT & MOUNTING GP
190-7137 COUNTERWEIGHT & MOUNTING GP
COUNTERWEIGHT & MOUNTING GP
190-7135 COUNTERWEIGHT & MOUNTING GP
BUMPER GP
231-6966 BUMPER GP
FENDER & COVER GP
190-7175 FENDER & COVER GP
220-5806 FRAME AR-UPPER
242-8735 FRAME AR-UPPER
FRAME GP-UPPER
189-4094 FRAME GP-UPPER
FRAME GP-UPPER
220-5808 FRAME GP-UPPER
FRAME GP-UPPER
231-6964 FRAME GP-UPPER
GEAR & BEARING GP-SWING
191-2527 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
191-2527 GEAR & BEARING GP-SWING

Truck sale:

 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
Caterpillar 330CL, Crawler Excavators, Construction
55,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.
Caterpillar 330CL, Crawler Excavators, Construction
48,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT
Caterpillar 330CL
 
Caterpillar 330CL
- Crawler Excavators
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.