HYDRAULIC SYSTEM
HYDRAULIC GPFILTER GP
OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
HYDRAULIC GP#SEBP31500490
171-0151: HYDRAULIC AR
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 168-9374 Y | [1] | LINES GP-FRONT | ||
| 168-9368 Y | [1] | LINES GP-MOTOR | ||
| 207-9585 Y | [1] | LINES GP-PILOT | ||
| 168-9376 Y | [1] | LINES GP-PUMP | ||
| 168-9375 Y | [1] | LINES GP-RETURN & FILTER | ||
| 168-9373 Y | [1] | LINES GP-SWING MOTOR | ||
| 176-4360 Y | [1] | LINES GP-TRAVEL MOTOR | ||
| -OR- | ||||
| 187-7090 Y | [1] | LINES GP-TRAVEL MOTOR | ||
| 151-6645 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC (FRONT, REAR) | ||
| 151-6647 Y | [1] | PUMP & MTG GP-HYDRAULIC (SWING, FAN, PILOT) | ||
| 168-9369 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 168-9371 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| 180-7882 Y | [1] | VALVE GP-MAIN CONTROL | ||
| -OR- | ||||
| 223-7750 Y | [1] | VALVE GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31500491
201-4923: HYDRAULIC AR
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS#SEBP31500492
201-5340: HYDRAULIC AR
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 201-0496 Y | [1] | FILTER & LINES GP-HYDRAULIC (RETURN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31500493
234-2259: HYDRAULIC AR-REACH
234-2259 HYDRAULIC AR-REACH
S/N FDL1-UP
PART OF 232-0497 DEMOLITION AR
AN ATTACHMENT
S/N FDL1-UP
PART OF 232-0497 DEMOLITION AR
AN ATTACHMENT
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 196-3550 Y | [1] | CONTROL GP-HYDRAULIC PEDAL (AUXILIARY) | ||
| 236-8643 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 234-6703 Y | [1] | LINES GP-HEATER | ||
| 234-6696 Y | [1] | LINES GP-FRONT (MEDIUM PRESSURE) | ||
| 234-6701 Y | [1] | LINES GP-FRONT (CAB TILT) | ||
| 234-6699 Y | [1] | LINES GP-PILOT (MEDIUM PRESSURE) | ||
| 234-6698 Y | [1] | LINES GP-PILOT (STICK LOAD CONTROL) | ||
| 234-6697 Y | [1] | LINES GP-RETURN | ||
| 234-6700 Y | [1] | LINES GP-ROTATOR (FREE ROTATE) | ||
| 237-9872 Y | [1] | VALVE GP-MAIN CONTROL | ||
| 234-6693 Y | [1] | WARNING GP-STABILITY | ||
| 234-6702 Y | [1] | WIRING GP-CAB TILT (ALARM, SWITCH) | ||
| 235-6767 Y | [1] | WIRING GP-ELECTRONIC CONTROL (CAB TILT) | ||
| 233-2971 Y | [1] | WIRING GP-PLATFORM (CAB TILT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31500494
274-2484: KIT-INDICATOR
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS#SEBP31500495
159-7744: LEVER GP-CONTROL
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | |
| 2. | 121-7057 | [1] | KNOB (HYDRAULIC CONTROLS LOCKOUT) | |
| 3. | 117-6269 | [1] | LEVER | |
| 4. | 117-6270 | [1] | SUPPORT AS | |
| 5. | 117-6272 | [1] | LEVER AS | |
| 6. | 5D-4822 | [3] | RING-RETAINING | |
| 7. | 117-6271 | [1] | SPRING | |
| 8. | 117-6274 | [1] | PIN | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP31500496
153-8591: LINES GP-AUXILIARY HYDRAULIC
153-8591 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N FDL1-UP; CLS1-UP
Type 1
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
S/N FDL1-UP; CLS1-UP
Type 1
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-8057 | [1] | TUBE AS | |
| 2. | 173-8058 | [2] | TUBE AS | |
| 3. | 173-8059 | [2] | TUBE AS | |
| 4. | 187-9837 | [1] | TUBE AS | |
| 5. | 173-8063 | [1] | BLOCK | |
| 6. | 8T-6385 M | [4] | BOLT (M16X2X180-MM) | |
| 7. | 173-8065 | [2] | PLATE AS | |
| 8. | 173-8067 | [4] | CLIP | |
| 9. | 173-8069 | [2] | PLATE | |
| 10. | 146-1461 | [4] | PLATE | |
| 11. | 202-7153 | [2] | PLATE | |
| 12. | 143-4160 | [26] | CLIP | |
| 13. | 8T-4193 M | [28] | BOLT (M16X2X50-MM) | |
| 14. | 8T-4140 M | [8] | BOLT (M16X2X60-MM) | |
| 15. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 16. | 179-5212 | [8] | PLATE | |
| 17. | 7X-2559 M | [12] | BOLT (M16X2X160-MM) | |
| 18. | 7X-2555 M | [6] | BOLT (M16X2X80-MM) | |
| 19. | 7X-2554 M | [14] | BOLT (M16X2X70-MM) | |
| 20. | 9X-8257 | [58] | WASHER (17.5X30X3.5-MM THK) | |
| 21. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 22. | 1P-3706 | [4] | SEAL-RECTANGULAR | |
| 23. | 173-8135 | [6] | PLATE AS | |
| 24. | 202-7152 | [2] | CLIP | |
| M | METRIC PART | |||
#SEBP31500497
153-8591: LINES GP-AUXILIARY HYDRAULIC
153-8591 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N FDL1-UP; CLS1-UP
Type 2
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
S/N FDL1-UP; CLS1-UP
Type 2
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-8057 | [1] | TUBE AS | |
| 2. | 173-8058 | [2] | TUBE AS | |
| 3. | 173-8059 | [2] | TUBE AS | |
| 4. | 187-9837 | [1] | TUBE AS | |
| 5. | 173-8063 | [1] | BLOCK | |
| 6. | 8T-6385 M | [4] | BOLT (M16X2X180-MM) | |
| 7. | 173-8065 | [2] | PLATE AS | |
| 8. | 173-8067 | [4] | CLIP | |
| 9. | 173-8069 | [2] | PLATE | |
| 10. | 146-1461 | [4] | PLATE | |
| 11. | 202-7153 | [2] | PLATE | |
| 12. | 143-4160 | [26] | CLIP | |
| 13. | 8T-4193 M | [32] | BOLT (M16X2X50-MM) | |
| 14. | 8T-4140 CM | [24] | BOLT (M16X2X60-MM) | |
| 15. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 16. | 179-5212 | [8] | PLATE | |
| 17. | 7X-2559 M | [12] | BOLT (M16X2X160-MM) | |
| 18. | 7X-2555 M | [6] | BOLT (M16X2X80-MM) | |
| 19. | 7X-2554 M | [10] | BOLT (M16X2X70-MM) | |
| 20. | 9X-8257 C | [74] | WASHER (17.5X30X3.5-MM THK) | |
| 21. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 22. | 1P-3706 | [4] | SEAL-RECTANGULAR | |
| 23. | 173-8135 | [6] | PLATE AS | |
| 24. | 202-7152 | [2] | CLIP | |
| 25. | 5P-8077 C | [8] | FLANGE-HALF | |
| 26. | 212-5536 CI | [2] | HOSE AS | |
| 27. | 1P-3705 C | [4] | SEAL-RECTANGULAR | |
| 28. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 29. | 6H-3615 | [2] | PLUG-PROTECTION | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP31500498
153-8591: LINES GP-AUXILIARY HYDRAULIC
153-8591 LINES GP-AUXILIARY HYDRAULIC -BOOM
S/N FDL1-UP; CLS1-UP
Type 3
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
S/N FDL1-UP; CLS1-UP
Type 3
FOR USE WITH 8.4-M (27.6-FT) BOOM
AN ATTACHMENT
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-3615 | [2] | PLUG-PROTECTION | |
| 2. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 3. | 143-4160 C | [24] | CLIP | |
| 4. | 146-1463 C | [2] | CLIP (TAB) | |
| 5. | 173-8057 | [1] | TUBE AS | |
| 6. | 173-8058 | [2] | TUBE AS | |
| 7. | 173-8059 | [2] | TUBE AS | |
| 8. | 173-8065 | [2] | PLATE AS | |
| 9. | 173-8067 | [4] | CLIP | |
| 10. | 173-8069 | [2] | PLATE | |
| 11. | 153-8587 | [6] | PLATE AS | |
| 12. | 179-5212 | [8] | PLATE | |
| 13. | 202-7153 | [2] | PLATE | |
| 14. | 212-5536 I | [2] | HOSE AS | |
| 15. | 245-2431 C | [1] | TUBE AS | |
| 16. | 146-1461 | [4] | PLATE | |
| 17. | 1P-3705 | [4] | SEAL-RECTANGULAR | |
| 18. | 1P-3706 | [4] | SEAL-RECTANGULAR | |
| 19. | 5P-8077 | [8] | FLANGE-HALF | |
| 20. | 7X-2554 M | [10] | BOLT (M16X2X70-MM) | |
| 21. | 7X-2555 CM | [4] | BOLT (M16X2X80-MM) | |
| 22. | 7X-2559 M | [12] | BOLT (M16X2X160-MM) | |
| 23. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 24. | 8T-4140 M | [24] | BOLT (M16X2X60-MM) | |
| 25. | 8T-4193 M | [32] | BOLT (M16X2X50-MM) | |
| 26. | 8T-6385 M | [4] | BOLT (M16X2X180-MM) | |
| 27. | 9X-8257 C | [70] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP31500499
153-8819: LINES GP-AUXILIARY HYDRAULIC
153-8819 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N FDL1-250; CLS1-261
H, HB-FAMILY
FOR USE WITH 3.7-M (12-FT) STICK
AN ATTACHMENT
S/N FDL1-250; CLS1-261
H, HB-FAMILY
FOR USE WITH 3.7-M (12-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 385B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 230-0311 | [2] | TUBE AS | |
| 2. | 216-6537 I | [2] | HOSE AS | |
| 3. | 6C-6814 | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF) | |
| 4. | 143-4160 | [8] | CLIP | |
| 5. | 5P-8077 | [8] | FLANGE-HALF | |
| 6. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| 7. | 8T-4193 M | [8] | BOLT (M16X2X50-MM) | |
| 8. | 7X-2557 M | [4] | BOLT (M16X2X140-MM) | |
| 9. | 8T-4140 M | [16] | BOLT (M16X2X60-MM) | |
| 10. | 9X-8257 | [28] | WASHER (17.5X30X3.5-MM THK) | |
| 11. | 3K-8460 | [2] | PLUG (1/2-20-THD) | |
| 12. | 1J-9671 | [2] | SEAL-O-RING | |
| 13. | 1P-3705 | [4] | SEAL-RECTANGULAR | |
| 14. | 1P-3706 | [2] | SEAL-RECTANGULAR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
