ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CAMSHAFT GPENGINE ARRANGEMENT
ENGINE AR#SEBP31520010
237-0283: ENGINE AR
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 165-4468 Y | [1] | CONTROL & MTG GP-ENGINE ELEK | ||
| 202-3301 Y | [1] | COVER GP-CYLINDER BLOCK (CRANKCASE BREATHER) | ||
| 127-5728 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 118-1727 Y | [1] | COVER GP-FRONT HOUSING (ACCESSORY DRIVE) | ||
| 211-3285 Y | [1] | COVER GP-FRONT HOUSING | ||
| 164-6490 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 190-0795 Y | [1] | DAMPER & PULLEY GP | ||
| 187-0481 Y | [1] | DRIVE GP-FAN | ||
| 188-9037 Y | [1] | ELBOW GP-AIR INLET | ||
| 389-7017 Y | [1] | ENGINE AR | ||
| 117-2794 Y | [1] | FASTENER GP-FLYWHEEL | ||
| 116-4556 Y | [1] | FASTENER GP-FRONT HOUSING | ||
| 187-0474 Y | [1] | FILTER GP-ENGINE OIL | ||
| 237-4839 Y | [1] | FITTING GP-FUEL LINES | ||
| 116-5386 Y | [1] | FLYWHEEL GP | ||
| 196-1829 Y | [1] | FUMES DISPOSAL GP | ||
| 187-0476 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE) | ||
| 248-8835 Y | [1] | HOUSING & REGULATOR GP | ||
| 187-0473 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 165-4446 Y | [1] | HOUSING GP-FRONT | ||
| 191-3063 Y | [1] | LIFTING GP-ENGINE | ||
| 202-6603 Y | [1] | LINES GP-ENGINE OIL | ||
| 190-5383 Y | [1] | LINES GP-FUEL | ||
| 165-4465 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 244-0989 Y | [1] | LINES GP-TURBOCHARGER WATER | ||
| 165-4444 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 187-0472 Y | [1] | PAN GP-OIL | ||
| 169-3105 Y | [1] | PLUG GP-ENGINE | ||
| 205-4013 Y | [1] | PLUG GP-WATER LINES | ||
| 178-3899 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 118-7284 Y | [1] | STARTING AID GP (HEATER) | ||
| 248-5376 Y | [1] | TURBOCHARGER GP | ||
| 204-3604 Y | [1] | WIRING GP-ELECTRONIC CONTROL | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 430-3914 Y | [1] | KIT-ENGINE OVERHAUL (BRONZE) | ||
| 430-8168 Y | [1] | KIT-ENGINE OVERHAUL (SILVER) | ||
| 20R-1465 Y | [1] | KIT-ENGINE OVERHAUL (GOLD) | ||
| 20R-1478 Y | [1] | KIT-ENGINE OVERHAUL (PLATINUM) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520011
389-7015: ENGINE AR
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS#SEBP31520012
389-7016: ENGINE AR
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS#SEBP31520013
389-7017: ENGINE AR
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS#SEBP31520014
187-0471: ENGINE AR-CORE
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 164-6100 Y | [1] | CAMSHAFT GP | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 164-6148 Y | [1] | CRANKSHAFT GP | ||
| 161-3406 Y | [1] | CYLINDER BLOCK GP | ||
| 210-5987 Y | [1] | CYLINDER HEAD GP | ||
| 208-5139 | [1] | ELECTRONICS GP-ENGINE RATINGS | ||
| 155-7918 Y | [1] | GEAR GP-FRONT | ||
| 165-4446 Y | [1] | HOUSING GP-FRONT | ||
| 177-7878 Y | [1] | PISTON & ROD GP | ||
| 191-3517 Y | [1] | PUMP & MTG GP-UNIT INJ HYD | ||
| 195-8098 Y | [1] | PUMP GP-ENGINE OIL | ||
| 166-1759 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 191-5518 Y | [1] | TURBOCHARGER GP | ||
| 155-7927 Y | [1] | VALVE MECHANISM GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520015
233-6935: ENGINE AR-CORE
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 164-6100 Y | [1] | CAMSHAFT GP | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 164-6148 Y | [1] | CRANKSHAFT GP | ||
| 161-3406 Y | [1] | CYLINDER BLOCK GP | ||
| 210-5987 Y | [1] | CYLINDER HEAD GP | ||
| 233-7571 | [1] | ELECTRONICS GP-ENGINE RATINGS | ||
| 155-7918 Y | [1] | GEAR GP-FRONT | ||
| S/N 4ZF6907-12454 | ||||
| 205-1321 Y | [1] | GEAR GP-FRONT | ||
| S/N 4ZF12455-UP | ||||
| 165-4446 Y | [1] | HOUSING GP-FRONT | ||
| 177-7878 Y | [1] | PISTON & ROD GP | ||
| 195-8098 Y | [1] | PUMP GP-ENGINE OIL | ||
| 166-1759 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 165-4450 Y | [1] | PUMP GP-UNIT INJECTOR HYD | ||
| 191-5518 Y | [1] | TURBOCHARGER GP | ||
| S/N 4ZF6907-12454 | ||||
| 248-5376 Y | [1] | TURBOCHARGER GP | ||
| S/N 4ZF12455-UP | ||||
| 155-7927 Y | [1] | VALVE MECHANISM GP | ||
| GASKET KITS WILL BE PROVIDED WHEN AVAILABLE | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520016
388-5610: ENGINE AR-CORE
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 164-6100 Y | [1] | CAMSHAFT GP | ||
| 164-6148 Y | [1] | CRANKSHAFT GP | ||
| 161-3406 Y | [1] | CYLINDER BLOCK GP | ||
| 210-5987 Y | [1] | CYLINDER HEAD GP | ||
| 205-1321 Y | [1] | GEAR GP-FRONT | ||
| 188-9141 Y | [6] | PISTON & ROD GP | ||
| 191-3517 Y | [1] | PUMP & MTG GP-UNIT INJ HYD | ||
| 195-8098 Y | [1] | PUMP GP-ENGINE OIL | ||
| 172-5780 Y | [6] | PUMP GP-UNIT INJECTION (HEUI) | ||
| 202-7674 Y | [1] | PUMP GP-WATER | ||
| 204-2565 Y | [1] | SENSOR GP-ENGINE | ||
| 155-7927 Y | [1] | VALVE MECHANISM GP | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520017
388-5615: ENGINE AR-CORE
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 164-6100 Y | [1] | CAMSHAFT GP | ||
| 188-3826 Y | [1] | COOLER GP-ENGINE OIL | ||
| 164-6148 Y | [1] | CRANKSHAFT GP | ||
| 161-3406 Y | [1] | CYLINDER BLOCK GP | ||
| 210-5987 Y | [1] | CYLINDER HEAD GP | ||
| 205-1321 Y | [1] | GEAR GP-FRONT | ||
| 188-9141 Y | [6] | PISTON & ROD GP | ||
| 195-8098 Y | [1] | PUMP GP-ENGINE OIL | ||
| 172-5780 Y | [6] | PUMP GP-UNIT INJECTION (HEUI) | ||
| 165-4450 Y | [1] | PUMP GP-UNIT INJECTOR HYD | ||
| 202-7674 Y | [1] | PUMP GP-WATER | ||
| 204-2565 Y | [1] | SENSOR GP-ENGINE | ||
| 155-7927 Y | [1] | VALVE MECHANISM GP | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520018
193-2707: INSTALLATION AR-ENGINE
193-2707 INSTALLATION AR-ENGINE
S/N MCA1-UP; GKX1-UP
PART OF 186-1256, 186-1257 GENERAL AR
S/N MCA1-UP; GKX1-UP
PART OF 186-1256, 186-1257 GENERAL AR
Parts for your 330C L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 193-2713 Y | [1] | AIR CLEANER GP | ||
| 189-2804 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 193-2711 Y | [1] | COOLER & MTG GP-HYDRAULIC OIL | ||
| 193-2708 Y | [1] | LINES GP-AIR | ||
| 193-2720 Y | [1] | LINES GP-AIR | ||
| 193-2717 Y | [1] | LINES GP-ENGINE OIL DRAIN | ||
| 193-2716 Y | [1] | LINES GP-MUFFLER DRAIN | ||
| 193-2715 Y | [1] | MOUNTING GP-ENGINE | ||
| 193-2719 Y | [1] | MOUNTING GP-ENGINE OIL FILTER | ||
| 193-2709 Y | [1] | RADIATOR GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31520019
164-6100: CAMSHAFT GP
Parts for your 330C L EXCAVATOR:
CATERPILLAR SISInformation:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Engine News
A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/03
2010/02/03
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Systems Operation
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Troubleshooting
Service Magazine
Caterpillar Parts SIS Catalog 330C L :
Truck sale:
55,000


