AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-8277 CAB GP -EXTERIOR S/N BTD1-UP; AMH1-UP PART OF 171-7346 CAB GP Type 1 AN ATTACHMENT 325C EXCAVATOR


OPERATOR STATION
CAB GP
AIR CONDITIONER GP
CONSOLE GP

EXCAVATOR 325C EXCAVATOR AMH
 325C & 325C L Excavators AMH00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3153 325C AMH   (2001)

OPERATOR STATION

CAB GP
CAB GP
176-1970 CAB GP
CAB GP
176-1981 CAB GP
CAB GP
185-8277 CAB GP
CAB GP
185-8277 CAB GP
189-3444 CAB GP
189-3446 CAB GP
 

#SEBP31530560
 

185-8277: CAB GP

185-8277 CAB GP -EXTERIOR
S/N BTD1-UP; AMH1-UP
PART OF 171-7346 CAB GP
Type 1
AN ATTACHMENT
i01367388 SEBP3153
1858277 CAB GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3660 [1] BRACKET AS  
5. 161-3685 [1] ROD  
6. 161-3690 [1] HANDLE AS  
  8T-4132 M [1] NUT (M16X2-THD)  
7. 161-3697 [1] GUARD  
8. 164-0523 [1] LEVER AS  
9. 164-0527 [1] ROD  
10. 156-6642 [1] LEVER AS  
  164-0664 [1] BRACKET  
  176-1941 [1] PIN  
  185-8280 [1] WASHER-WAVE (10.5X15X0.3-MM THK)  
  185-8281 [1] SPRING  
11. 167-7042 [2] SEAL  
12. 171-7396 [1] COVER AS  
13. 171-7426 [1] CABLE AS  
14. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
15. 176-1942 [1] COVER  
16. 176-1973 [1] LATCH AS  
17. 176-1986 [1] LAMP AS-DOME  
18. 178-5570 [2] GROMMET  
19. 185-8196 [1] GROMMET  
20. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
21. 196-1675 [1] HANDLE AS  
22. 6I-5470 E SEAL (150-CM)  
23. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
24. 105-2169 [3] BOLT AS  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 156-6617 [1] MIRROR  
28. 156-6618 [1] SUPPORT AS  
29. 189-3396 M [5] NUT (M10X1.5-THD)  
30. 1R-5998 [4] LOCKWASHER  
31. 3B-4510 [1] LOCKWASHER  
32. 3E-8020 M [2] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 189-3409 [3] WASHER  
35. 4I-1205 [2] BUMPER  
36. 4I-1206 [2] GUIDE  
37. 4I-3063 [1] SPRING  
38. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
39. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
40. 4I-4270 [1] HOLDER-GLASS  
41. 4I-4392 [3] CLIP  
42. 5C-7793 [1] HOOK-COAT  
43. 6V-7696 [4] HOSE  
44. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
45. 8T-8193 [1] CLIP (TAB)  
46. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
48. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
49. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
50. 9X-2046 M [4] SCREW-TRUSS HEAD (M6X1X35-MM)  
51. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP31530561
 

185-8277: CAB GP

185-8277 CAB GP -EXTERIOR
S/N BTD1-UP; AMH1-UP
PART OF 161-3743, 171-7346 CAB GP
Type 2
AN ATTACHMENT
i02407979 SEBP3153
1858277 CAB GP Parts scheme 1858277 CAB GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-5998 [4] LOCKWASHER  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
4. 4I-1205 [2] BUMPER  
5. 4I-1206 [2] GUIDE  
6. 185-8196 [1] GROMMET (FRESH AIR)  
7. 4I-3063 [1] SPRING  
8. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
9. 4I-4270 [1] HOLDER-GLASS  
10. 4I-4392 [3] CLIP  
11. 5C-7793 [1] HOOK-COAT  
12. 6I-5470 E SEAL (150-CM)  
13. 6V-7636 [4] PIN AS-SPRING  
14. 189-3396 M [5] NUT (M10X1.5-THD)  
15. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
16. 095-0755 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
17. 105-2169 [2] BOLT AS  
    (EACH INCLUDES)
  8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
18. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
19. 139-7126 [1] HOLDER  
20. 139-7127 [1] HOLDER  
21. 196-1675 [1] HANDLE AS  
22. 156-6599 [1] STRIKER  
23. 156-6617 [1] MIRROR  
24. 156-6618 [1] SUPPORT AS  
25. 201-4530 [1] BRACKET AS  
26. 161-3685 [1] ROD  
27. 161-3690 [1] HANDLE AS  
28. 161-3697 [1] GUARD  
29. 164-0523 [1] LEVER AS  
30. 164-0527 [1] ROD  
31. 164-0528 Y [1] LEVER GP-CAB DOOR  
32. 167-7042 [2] SEAL  
33. 171-7396 [1] COVER AS  
34. 171-7426 [1] CABLE AS  
35. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
36. 176-1942 [1] COVER  
37. 205-6295 [1] LATCH AS  
38. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
39. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)  
40. 178-5570 [2] GROMMET  
41. 133-8016 [1] PACKING  
42. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
43. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
44. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
45. 8T-4193 M [1] BOLT (M16X2X50-MM)  
46. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
48. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
49. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
50. 262-9384 [4] SEAL  
51. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
52. 210-5808 [1] SEAL  
53. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31530562
 

189-3444: CAB GP

189-3444 CAB GP
S/N BTD211-342
FIELD REPLACEMENT FOR @@@@@161-3743@@@@@
i02408066 SEBP3153
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  161-3743 Y [1] CAB GP  
  163-6623 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31530563
 

189-3446: CAB GP

189-3446 CAB GP
S/N BTD1-UP; AMH1-UP
FIELD REPLACEMENT FOR @@@@@171-7346@@@@@
FIELD INSTALLATION
i02371745 SEBP3153
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  171-7346 Y [1] CAB GP  
  163-6623 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31530564
 

183-8088: COMPRESSOR GP-REFRIGERANT

183-8088 COMPRESSOR GP-REFRIGERANT
S/N 5GG1-UP
PART OF 159-3458 ENGINE AR-COMPLETE
i01673298 SEBP3153
1838088 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
3. 258-9892 M [2] BOLT (M8X1.25X80-MM)  
4. 305-0324 [1] COMPRESSOR GP-REFRIGERANT  
5. 132-5789 [2] CLIP (LADDER)  
  M   METRIC PART
 

#SEBP31530565
 

212-8518: COMPRESSOR GP-REFRIGERANT

212-8518 COMPRESSOR GP-REFRIGERANT
S/N 5GG2649-UP
PART OF 234-2918 ENGINE AR-COMPLETE
i02070758 SEBP3153
2128518 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
3. 258-9892 M [2] BOLT (M8X1.25X80-MM)  
4. 245-7779 C [1] COMPRESSOR GP-REFRIGERANT  
  236-6267 [1] COIL AS (24-VOLT)(REFRIGERANT COMPRESSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  236-6455 B [1] WASHER (8.5X12.5X0.1-MM THK)  
  236-6456 B [1] WASHER (8.5X12.5X0.5-MM THK)  
  236-6457 B [1] WASHER (8.5X12.5X1-MM THK)  
  236-6458 B [1] WASHER (8.5X12.5X1.5-MM THK)  
5. 132-5789 [1] CLIP (LADDER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP31530566
 

178-5598: CONDENSER & MTG GP-REFRIGERANT

178-5598 CONDENSER & MTG GP-REFRIGERANT
S/N BTD1-UP; AMH1-UP
PART OF 178-6643 INSTALLATION AR-ENGINE
i01672735 SEBP3153
1785598 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-0588 [1] CONDENSER AS  
2. 185-8268 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
3. 185-8270 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
6. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP31530567
 

161-3758: CONSOLE GP-OPERATOR

161-3758 CONSOLE GP-OPERATOR
S/N BTD1-UP; AMH1-UP
PART OF 210-5793 OPERATOR AR
i01317040 SEBP3153
1613758 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-3760 Y [1] CONSOLE GP-OPERATOR (RH)  
2. 161-3759 Y [1] CONSOLE GP-OPERATOR (LH)  
3. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 178-5523 [2] COVER  
6. 176-1914 [2] SUPPORT  
7. 176-1913 [2] GUARD  
8. 176-1915 [2] SUPPORT  
9. 9X-2043 M [12] SCREW-TRUSS HEAD (M6X1X14-MM)  
10. 176-1916 [2] GROMMET  
11. 178-5423 [2] GROMMET  
12. 178-5422 [2] GROMMET  
13. 185-8161 [2] INSULATOR  
14. 7K-1181 [6] STRAP-CABLE  
15. 178-5408 [1] CUSHION AS-ARM  
16. 178-5426 [3] SCREW-TAPPING  
17. 178-5628 [1] STRIKER  
18. 185-8287 M [2] SCREW-PAN HEAD (M4X0.7X12-MM)  
19. 178-5627 [1] HINGE  
20. 185-8162 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
21. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 273-5302 [1] SUPPORT AS (RH)  
23. 273-5301 [1] SUPPORT AS (LH)  
24. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31530568
 

161-3759: CONSOLE GP-OPERATOR

161-3759 CONSOLE GP-OPERATOR
S/N BTD1-UP; AMH1-UP
PART OF 161-3758 CONSOLE GP-OPERATOR
i01317050 SEBP3153
1613759 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-9096 M [4] SCREW-TRUSS HEAD (M6X1X6-MM)  
2. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
3. 178-5401 [1] SUPPORT AS  
4. 178-5408 [1] CUSHION AS-ARM  
5. 178-5426 [9] SCREW-TAPPING  
6. 178-5519 [1] COVER  
7. 178-5520 [1] COVER  
8. 178-5521 [1] COVER  
9. 178-5522 [1] COVER  
10. 178-5524 Y [1] ADJUSTMENT GP-CONSOLE  
11. 178-5530 [1] ASHTRAY  
12. 178-5531 [1] CASE  
13. 284-4566 [1] CASE  
14. 178-5627 [1] HINGE  
15. 178-5628 [1] STRIKER  
16. 178-5629 [1] LATCH  
17. 185-8162 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
18. 185-8287 M [2] SCREW-PAN HEAD (M4X0.7X12-MM)  
19. 2Y-5687 [4] WASHER (8.5X16X1.2-MM THK)  
20. 119-5026 [8] SCREW-PAN HEAD (10-16X0.63-IN)  
21. 155-7099 [8] NUT  
22. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31530569
 

161-3760: CONSOLE GP-OPERATOR

161-3760 CONSOLE GP-OPERATOR
S/N BTD1-UP; AMH1-UP
PART OF 161-3758 CONSOLE GP-OPERATOR
i01317055 SEBP3153
1613760 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-9096 M [6] SCREW-TRUSS HEAD (M6X1X6-MM)  
2. 128-2135 M [4] SCREW-TRUSS HEAD (M6X1X13-MM)  
3. 178-5400 [1] SUPPORT AS  
4. 178-5426 [8] SCREW-TAPPING  
5. 178-5519 [1] COVER  
6. 178-5522 [1] COVER  
7. 178-5524 Y [1] ADJUSTMENT GP-CONSOLE  
8. 178-5529 [1] COVER  
9. 284-4567 [1] CASE  
10. 178-5548 [1] COVER  
11. 178-5629 [1] LATCH  
12. 178-5632 [1] BRACKET  
13. 185-8163 M [3] SCREW-MACHINE (M5X0.8X8-MM)  
14. 196-1565 [1] BRACKET  
15. 2Y-5687 [6] WASHER (8.5X16X1.2-MM THK)  
16. 119-5026 [5] SCREW-PAN HEAD (10-16X0.63-IN)  
17. 155-7099 [10] NUT  
18. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
19. 201-4441 E SEAL (5-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Service Magazine
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 325C :

CAB GP
176-1981 CAB GP
CAB GP
176-1970 CAB GP
CAB GP
171-7346 CAB GP
CAB GP
171-7345 CAB GP
CAB GP
161-3743 CAB GP
CAB GP
161-3742 CAB GP
BOX GP-STORAGE
142-3840 BOX GP-STORAGE
BLOWER GP-CAB
178-5527 BLOWER GP-CAB
CAB GP
185-8277 CAB GP
189-3444 CAB GP
189-3446 CAB GP
COMPRESSOR GP-REFRIGERANT
183-8088 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
212-8518 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
178-5598 CONDENSER & MTG GP-REFRIGERANT
CONSOLE GP-OPERATOR
161-3758 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
161-3759 CONSOLE GP-OPERATOR

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.