AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

217-1455 BUCKET AS-GENERAL PURPOSE -FLUSH MOUNTED TEETH S/N BBD1-UP 2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET PART OF 217-1452 BUCKET GP-GENERAL PURPOSE AN ATTACHMENT 963C


WORK TOOLS
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK LOADER 963C TRACK LOADER BBD
 963C TRACK-TYPE LOADER TIER II BBD00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3169 963C BBD   (2000)

WORK TOOLS

BUCKET GP
264-3275 BUCKET AR-MULTIPURPOSE
BUCKET AS-GENERAL PURPOSE
217-1454 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
217-1455 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
254-3229 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
254-7176 BUCKET AS-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
217-1452 BUCKET GP-GENERAL PURPOSE
 

#SEBP31690680
 

217-1455: BUCKET AS-GENERAL PURPOSE

217-1455 BUCKET AS-GENERAL PURPOSE -FLUSH MOUNTED TEETH
S/N BBD1-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 217-1452 BUCKET GP-GENERAL PURPOSE
AN ATTACHMENT
i01798861 SEBP3169
2171455 BUCKET AS-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3A-8877 [1] HINGE AS  
12. 8V-4981 [2] PLATE (RH)  
13. 8V-4982 [2] PLATE (LH)  
18. 8Y-9405 [1] EDGE AS-CUTTING  
19. 8Y-9406 [1] PLATE AS (LH)  
19A. 6W-2453 [1] CORNER (LH)  
19B. 8Y-9106 [1] BAR  
20. 8Y-9407 [1] PLATE AS (RH)  
20A. 6W-2454 [1] CORNER (RH)  
20B. 8Y-9107 [1] BAR  
21. 123-3657 [1] SPILL PLATE  
22. 217-1458 [1] HINGE AS  
23. 217-1467 [1] HINGE AS  
24. 217-1473 [1] HINGE AS  
25. 217-1474 [1] HINGE AS  
26. 217-6112 [1] HINGE AS  
 

#SEBP31690681
 

254-3229: BUCKET AS-GENERAL PURPOSE

254-3229 BUCKET AS-GENERAL PURPOSE
S/N BBD1-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH BOLT-ON CUTTING EDGE AND SET OF EIGHT BOLT-ON TEETH
AN ATTACHMENT
i02344725 SEBP3169
2543229 BUCKET AS-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6263 [1] EDGE-CUTTING  
2. 123-3657 [1] SPILL PLATE  
3. 254-3231 [1] HINGE AS (LIFT, INNER, RH)  
4. 254-3232 [1] HINGE AS (LIFT, OUTER, RH)  
5. 254-3233 [1] HINGE AS (LIFT, INNER, LH)  
6. 254-3234 [1] HINGE AS (LIFT, OUTER, LH)  
7. 254-3236 [1] HINGE AS (TILT, LH)  
8. 254-3237 [1] HINGE AS (TILT, RH)  
9. 254-3243 [1] PLATE AS (LH)  
9A. 8E-5321 [1] CORNER (LH)  
9B. 8Y-9106 [1] BAR  
10. 254-3244 [1] PLATE AS (RH)  
10A. 8E-5320 [1] CORNER (RH)  
10B. 8Y-9107 [1] BAR  
11. 254-3246 [1] PLATE-WEAR  
12. 254-3247 [2] PLATE-WEAR  
13. 254-3248 [4] PLATE-WEAR  
14. 6V-3607 [1] FILM-NOTICE (BUCKET CORNER GUARD SYSTEM)  
15. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
 

#SEBP31690682
 

254-7176: BUCKET AS-GENERAL PURPOSE

254-7176 BUCKET AS-GENERAL PURPOSE -FLUSH MOUNTED TEETH
S/N BBD1-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH SET OF 8 TIPS
AN ATTACHMENT
i02344724 SEBP3169
2547176 BUCKET AS-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-3657 [1] SPILL PLATE  
2. 254-3231 [1] HINGE AS (LIFT, INNER, RH)  
3. 254-3232 [1] HINGE AS (LIFT, OUTER, RH)  
4. 254-3233 [1] HINGE AS (LIFT, INNER, LH)  
5. 254-3234 [1] HINGE AS (LIFT, OUTER, LH)  
6. 254-3236 [1] HINGE AS (TILT, LH)  
7. 254-3237 [1] HINGE AS (TILT, RH)  
8. 254-3246 [1] PLATE-WEAR  
9. 254-3247 [2] PLATE-WEAR  
10. 254-3248 [4] PLATE-WEAR  
11. 255-3091 [1] PLATE AS (LH)  
11A. 6W-2453 [1] CORNER (LH)  
11B. 8Y-9106 [1] BAR  
12. 255-3095 [1] PLATE AS (RH)  
12A. 6W-2454 [1] CORNER (RH)  
12B. 8Y-9107 [1] BAR  
13. 256-4723 [1] EDGE AS-CUTTING  
13A. 229-7094 [8] ADAPTER-TIP (K-90, FLUSH MOUNT)  
15. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
 

#SEBP31690683
 

217-1452: BUCKET GP-GENERAL PURPOSE

217-1452 BUCKET GP-GENERAL PURPOSE -FLUSH MOUNTED TEETH
S/N BBD1-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@254-7176@@@@@
AN ATTACHMENT
i01798860 SEBP3169
2171452 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-6748 [2] PLATE-WEAR  
2. 217-1455 Y [1] BUCKET AS-GENERAL PURPOSE  
3. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
4. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
5. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31690684
 

217-1453: BUCKET GP-GENERAL PURPOSE

217-1453 BUCKET GP-GENERAL PURPOSE
S/N BBD1-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@254-3229@@@@@
AN ATTACHMENT
i01798863 SEBP3169
2171453 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-6748 [2] PLATE-WEAR  
2. 217-1454 Y [1] BUCKET AS-GENERAL PURPOSE  
3. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
4. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
5. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31690685
 

216-9529: BUCKET GP-MULTIPURPOSE

216-9529 BUCKET GP-MULTIPURPOSE
S/N BBD1-UP
1.9-CU M (2.5-CU YD)HEAPED CAPACITY BARE BUCKET
PART OF 216-9532 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i01799894 SEBP3169
2169529 BUCKET GP-MULTIPURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-6184 [1] BOWL AS  
1A. 5G-7610 [1] EDGE-WEAR  
1B. 5G-7611 [2] BIT-END  
1C. 6W-2980 [1] EDGE-CUTTING  
1D. 8P-9770 [1] PLATE  
2. 5B-3807 [1] PLATE-FILLER  
3. 4F-2699 [1] BLOCK-STOP  
4. 3K-8150 [1] LUG  
5. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
6. 9K-9731 [2] SPACER (20.4X28.5X14.2-MM THK)  
7. 7X-0582 [2] WASHER-HARD (20X44.5X6-MM THK)  
8. 9V-1094 [2] PIN AS  
9. 216-9533 [1] BULLDOZER & BEARING AS  
9A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
9B. 7K-9204 [8] SEAL-LIP TYPE  
9C. 7P-1576 [4] BUSHING  
10. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)  
11. 7X-0448 [17] NUT (5/8-11-THD)  
12. 4T-8084 [1] EDGE-CUTTING  
13. 4T-8085 [2] BIT-END  
 

#SEBP31690686
 

264-3276: BUCKET GP-MULTIPURPOSE

264-3276 BUCKET GP-MULTIPURPOSE
S/N BBD1-UP
1.9-CU M (2.5-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 264-3275 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i02344562 SEBP3169
2643276 BUCKET GP-MULTIPURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8084 [1] EDGE-CUTTING  
2. 4T-8085 [2] BIT-END  
3. 9K-9731 [2] SPACER (20.4X28.5X14.2-MM THK)  
4. 216-9533 [1] BULLDOZER & BEARING AS  
4A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
4B. 7K-9204 [8] SEAL-LIP TYPE  
4C. 7P-1576 [4] BUSHING  
5. 264-3283 [1] BOWL AS  
5A. 6W-2980 [1] EDGE-CUTTING  
5B. 8P-9770 [1] PLATE  
5C. 267-5451 [2] BIT-END  
5D. 267-5460 [1] EDGE  
5E. 8E-5300 [1] CORNER (RH)  
5F. 8E-5301 [1] CORNER (LH)  
5G. 143-6178 [2] HINGE  
5H. 143-8477 [4] BAR  
5J. 267-5493 [2] PLUG-CUP  
5K. 6V-3607 B [1] FILM-NOTICE (BUCKET CORNER GUARD SYSTEM)  
6. 267-5453 B [1] BLOCK  
7. 267-5466 B [1] LUG  
8. 267-5468 [2] PIN AS  
10. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)  
11. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
12. 7X-0448 [17] NUT (5/8-11-THD)  
13. 7X-0582 [2] WASHER-HARD (20X44.5X6-MM THK)  
  B   USE AS REQUIRED
 

#SEBP31690687
 

3G-3625: EDGE GP-BIT & CUTTING

3G-3625 EDGE GP-BIT & CUTTING
S/N BBD1-UP
FOR USE WITH MULTIPURPOSE BUCKETS ONLY
AN ATTACHMENT
i00695175 SEBP3169
3G3625 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8101 [2] EDGE-END  
2. 253-0062 [1] GUARD-BUCKET CORNER (RH)  
3. 253-0063 [1] GUARD-BUCKET CORNER (LH)  
4. 1U-0600 [2] EDGE-CUTTING  
5. 2J-3507 [12] NUT-FULL (1-8-THD)  
6. 3K-9770 [4] NUT-FULL (1-1/4-7-THD)  
7. 4F-4042 [12] BOLT-PLOW (1-8X3-IN)  
8. 8T-9079 [4] BOLT-PLOW (1-1/4-7X3.35-IN)  
 

#SEBP31690688
 

133-0682: EDGE GP-CUTTING

133-0682 EDGE GP-CUTTING -HEAVY DUTY
S/N BBD1-UP
FOR USE WITH GENERAL PURPOSE BUCKETS ONLY
AN ATTACHMENT
i01050778 SEBP3169
1330682 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-6866 [5] EDGE-SEGMENT (HEAVY DUTY)  
2. 308-4326 [2] EDGE-SEGMENT  
3. 3K-9770 [14] NUT-FULL (1-1/4-7-THD)  
4. 6V-6535 [14] BOLT-PLOW (1-1/4-7X3.74-IN)  
 

#SEBP31690689
 

264-6234: EDGE GP-CUTTING

264-6234 EDGE GP-CUTTING
S/N BBD1-UP
FOR USE WITH @@@@@264-3275@@@@@
AN ATTACHMENT
i02331647 SEBP3169
2646234 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6694 [5] EDGE-SEGMENT  
2. 264-6233 [2] EDGE-SEGMENT  
3. 2J-3507 [14] NUT-FULL (1-8-THD)  
4. 4F-4042 [14] BOLT-PLOW (1-8X3-IN)  
 

Information:

Caterpillar Parts SIS Catalog 963C :

BUCKET AS-GENERAL PURPOSE
217-1454 BUCKET AS-GENERAL PURPOSE
264-3275 BUCKET AR-MULTIPURPOSE
216-9532 BUCKET AR-MULTIPURPOSE
ADAPTER-TIP
505-4046 ADAPTER-TIP
ADAPTER-TIP
505-4045 ADAPTER-TIP
ADAPTER-TIP
223-8097 ADAPTER-TIP
ADAPTER GP-TIP
539-5785 ADAPTER GP-TIP
ADAPTER GP-TIP
257-1766 ADAPTER GP-TIP
BUCKET AS-GENERAL PURPOSE
254-3229 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
254-7176 BUCKET AS-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
217-1452 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
217-1453 BUCKET GP-GENERAL PURPOSE
BUCKET GP-MULTIPURPOSE
216-9529 BUCKET GP-MULTIPURPOSE
BUCKET GP-MULTIPURPOSE
264-3276 BUCKET GP-MULTIPURPOSE
EDGE GP-BIT & CUTTING
3G-3625 EDGE GP-BIT & CUTTING
EDGE GP-CUTTING
133-0682 EDGE GP-CUTTING

Truck sale:

Caterpillar 963C
 
Caterpillar 963C
- track loaders
FABICK CAT
Caterpillar 963C, track loaders, Construction
54,000 
Caterpillar 963C, track loaders, Construction
- track loaders
FABICK CAT
Caterpillar 963C, Wheel Loaders, Construction
137,500 
Caterpillar 963C, Wheel Loaders, Construction
- Wheel Loaders
QUINN COMPANY
Caterpillar 963C, track loaders, Construction
116,000 
Caterpillar 963C, track loaders, Construction
- track loaders
CARTER MACHINERY COMPANY, INC.
Caterpillar 963C
 
Caterpillar 963C
- track loaders
FABICK CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.