AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-7798 COVER GP-FLYWHEEL HOUSING REAR STRUCTURE 3412 MARINE ENGINE


BASIC ENGINE
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412C Marine Engine 60M05161-UP SEBP3179 3412 60M   (1976)

BASIC ENGINE

HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4N-7798 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
4N-1890 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4N-2931 HOUSING GP-FLYWHEEL
 

#SEBP31790020
 

4N-7798: COVER GP-FLYWHEEL HOUSING

4N-7798 COVER GP-FLYWHEEL HOUSING
REAR STRUCTURE
i00370964 SEBP3179
4N7798 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [3] BOLT (3/8-16X1-IN)  
2. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2P-2772 [2] COVER  
  4N-0933 [2] GASKET  
4. 0S-1619 [1] BOLT (3/8-16X3-IN)  
5. 1A-0291 [1] COVER-SHAFT  
  2M-5446 [1] GASKET  
6. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
7. 4P-8425 C [1] COVER-ACCESSORY DRIVE  
8. 6F-7012 [2] STUD-TAPERLOCK (3/8-16X1.57-IN)  
  9S-8752 C [2] NUT-FULL (3/8-16-THD)  
9. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
  5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
10. 4N-1114 [1] COVER  
11. 9Y-6089 C [1] GASKET  
12. 4P-7820 C [1] COVER-ACCESSORY DRIVE  
13. 125-9794 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31790021
 

1N-4607: COVER GP-FRONT HOUSING

1N-4607 COVER GP-FRONT HOUSING
S/N 60M5161-8500
i00352656 SEBP3179
1N4607 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2509 [1] COVER  
  6N-2508 [1] GASKET  
2. 0S-1594 [3] BOLT (3/8-16X1-IN)  
3. 3M-0496 [1] STUD-TAPERLOCK (3/8-16X2.6-IN)  
4. 9S-8752 [7] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9N-5576 [1] COVER-FUEL PUMP GEAR  
  4N-1998 [1] GASKET (FUEL PUMP GEAR)  
7. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
8. 0L-1352 [6] BOLT (3/8-16X3.25-IN)  
9. 2P-1974 [3] STUD-TAPERLOCK (3/8-16X4.2-IN)  
10. 234-8937 [1] SEAL-INTEGRAL  
11. 2P-2772 [1] COVER  
12. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
13. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
14. 4P-7820 [1] COVER-ACCESSORY DRIVE  
  5F-3144 [1] SEAL-O-RING  
15. 4F-9081 [1] STUD  
16. 008-3851 [3] BOLT  
17. 4K-9628 [2] BOLT-12 POINT HEAD (3/8-16X0.87-IN)  
18. 8M-4435 [1] SEAL-O-RING  
19. 8N-4731 [1] ADAPTER-PUMP  
20. 4S-5898 [1] SEAL-O-RING  
21. 0L-0659 [6] STUD  
  0S-1573 F [8] BOLT (1/2-13X4-IN)(MTD ON FRONT HSG)  
  F   NOT SHOWN
 

#SEBP31790022
 

4N-6798: COVER GP-FRONT HOUSING

4N-6798 COVER GP-FRONT HOUSING
i00107929 SEBP3179
4N6798 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2509 [1] COVER  
  6N-2508 [1] GASKET  
2. 0S-1594 [3] BOLT (3/8-16X1-IN)  
3. 3M-0496 [1] STUD-TAPERLOCK (3/8-16X2.6-IN)  
4. 9S-8752 C [7] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9N-5576 [1] COVER-FUEL PUMP GEAR  
  4N-1998 [1] GASKET (FUEL PUMP GEAR)  
7. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
8. 0L-1352 [6] BOLT (3/8-16X3.25-IN)  
9. 2P-1974 [3] STUD-TAPERLOCK (3/8-16X4.2-IN)  
10. 4N-0933 [1] GASKET  
11. 2P-2772 [1] COVER  
12. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
13. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
14. 4P-7820 C [1] COVER-ACCESSORY DRIVE  
  5F-3144 C [1] SEAL-O-RING  
15. 4F-9081 [1] STUD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31790023
 

4W-5388: COVER GP-VALVE MECHANISM

4W-5388 COVER GP-VALVE MECHANISM
FOR USE WITH HEAT EXCHANGER COOLED ENGINES
i00379636 SEBP3179
4W5388 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7878 C [1] COVER AS-VALVE MECHANISM  
  7C-6514 [1] ADAPTER  
  272-2583 [1] SEAL-O-RING  
  9Y-0015 [1] COVER-ROCKER ARM  
2. 7C-7876 C [1] COVER AS-VALVE MECHANISM  
  7C-6514 [2] ADAPTER  
  9Y-0015 [1] COVER-ROCKER ARM  
  272-2583 [2] SEAL-O-RING  
3. 9L-8925 [57] BOLT (5/16-18X1.25-IN)  
4. 4W-2580 [4] BASE-VALVE MECHANISM COVER  
5. 5P-5678 D SEAL (1.4-M EACH)  
5A. 5P-5678 D SEAL (3.2-M EACH)  
5B. 5P-5678 D SEAL (2.8-M)  
6. 6N-2985 J [1] CAP AS-FILLER (ENGINE OIL)  
7. 6N-2758 [2] COVER-ROCKER ARM  
   
  9L-8925 F [3] BOLT (5/16-18X1.25-IN)  
    (NOT REQUIRED ON MODEL E247)
   
    AVAILABLE REPLACEMENT PART(S):
  113-5253 AJ [1] CAP AS-FILLER (ENGINE OIL)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  J   SERVICED PART MARKED J PROVIDES BLACK ENGINE DRESS-UP OPTION FOR PART MARKED J
 

#SEBP31790024
 

384-9906: CRANKSHAFT AS

384-9906 CRANKSHAFT AS
S/N 60M7787-UP
PART OF 4N-0922 CRANKSHAFT GP
i04789980 SEBP3179
3849906 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2940 [1] GEAR-CRANKSHAFT (99-TEETH)  
2. 4N-0684 [1] DOWEL  
3. 7S-5005 [1] DOWEL  
 

#SEBP31790025
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 60M5161-7585
i00089669 SEBP3179
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4088 C [1] CRANKSHAFT AS  
2. 4N-0684 [1] DOWEL  
3. 114-0966 [1] GEAR-CRANKSHAFT (99-TEETH)  
4. 8T-6757 [6] PLUG-PIPE  
5. 7S-5005 [1] DOWEL  
6. 253-1752 J [2] PLATE-THRUST  
7. 2W-1733 [1] SEAL GP-CRANKSHAFT (FRONT)  
8. 4W-5492 J [7] BEARING-MAIN (STANDARD)  
    EACH SERVICED BY
  317-8766 [1] BEARING-MAIN (DIESEL)  
  317-8766 [1] BEARING-MAIN (GAS)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
9. 2W-1734 [1] SEAL GP-CRANKSHAFT (REAR)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31790026
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 60M7586-UP
i01131544 SEBP3179
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2941 C [1] CRANKSHAFT AS  
2. 4N-0684 [1] DOWEL  
3. 151-2940 [1] GEAR-CRANKSHAFT (99-TEETH)  
4. 8T-6757 [6] PLUG-PIPE  
5. 7S-5005 [1] DOWEL  
6. 253-1752 J [2] PLATE-THRUST  
7. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
8. 4W-5492 J [7] BEARING-MAIN (STANDARD)  
    EACH SERVICED BY
  317-8766 [1] BEARING-MAIN (DIESEL)  
  321-5746 [1] BEARING-MAIN (GAS)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
9. 142-5868 [1] SEAL-CRANKSHAFT (REAR)(REAR)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31790027
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 60M7787-UP
i02302821 SEBP3179
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 384-9906 CY [1] CRANKSHAFT AS  
2. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARING & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790028
 

122-2243: CYLINDER BLOCK AS

122-2243 CYLINDER BLOCK AS
S/N 60M6271-UP
PART OF 123-0978, 1W-5915, 4N-2624 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@126-1377@@@@@, 12- 7W-4990 TUBE AS-OIL JET, 12-111-8606 BOLT-OIL JET, 12-168-4538 TUBE AS-OIL JET
i00519220 SEBP3179
1222243 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
2. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
3. 4N-0685 [5] BUSHING (1-IN WIDE)  
4. 197-9322 [12] LINER-CYLINDER BLOCK  
5. 142-7072 [12] SEAL-LINER (COOLANT)  
6. 4N-5858 [7] CAP (CRANKSHAFT BEARING)  
7. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
8. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
9. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
10. 110-2220 [12] SEAL-LINER  
11. 142-6217 [12] SEAL-O-RING  
   
  2W-3815 ABF INSERT-LINER SEAT (1.605-MM THK)  
  5N-0093 ABF INSERT-LINER SEAT (2.71-MM THK)  
  6I-4361 ABF INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABF INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABF INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABF INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABF INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABF INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 ABF INSERT-LINER SEAT (0.822-MM THK)  
  101-0523 ABF INSERT-LINER SEAT (5.21-MM THK)  
  101-0524 ABF INSERT-LINER SEAT (5.16-MM THK)  
  101-0525 ABF INSERT-LINER SEAT (5.26-MM THK)  
  159-9778 ABF LINER-CYLINDER BLOCK  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP31790029
 

122-8601: CYLINDER BLOCK AS

122-8601 CYLINDER BLOCK AS
S/N 60M5161-6270
PART OF 122-8607, 122-8608, 123-0978 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 2W-5208@@@@@
i00512814 SEBP3179
1228601 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
3. 4N-0685 [5] BUSHING (1-IN WIDE)  
4. 2W-6000 [12] LINER-CYLINDER BLOCK  
5. 110-2220 [36] SEAL-LINER  
6. 4N-5858 [7] CAP (CRANKSHAFT BEARING)  
7. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
8. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
9. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
   
  2W-3815 ABF INSERT-LINER SEAT (1.605-MM THK)  
  5N-0093 ABF INSERT-LINER SEAT (2.71-MM THK)  
  6I-4361 ABF INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABF INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABF INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABF INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABF INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABF INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 ABF INSERT-LINER SEAT (0.822-MM THK)  
  101-0523 ABF INSERT-LINER SEAT (5.21-MM THK)  
  101-0524 ABF INSERT-LINER SEAT (5.16-MM THK)  
  101-0525 ABF INSERT-LINER SEAT (5.26-MM THK)  
  159-9778 ABF LINER-CYLINDER BLOCK  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

Information:

Engine News
Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block
1979/05/09
Pipe Plug Added To Rear Of Cylinder Block Prevents Oil Leakage Into Flywheel Housing
1981/03/04
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing
1978/05/03
A New Integral Seal Provides Improved Sealing {7555}
2003/09/01
A New Front and Rear Cover Seal Is Available for Certain 3400 Series Industrial Engines {1151, 1157, 7555}
2013/03/29
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing<BR> (4N1890)
3412 INDUSTRIAL AND MARINE ENGINES
Flywheel Housing<BR> (4N2931)
3412 INDUSTRIAL AND MARINE ENGINES
Flywheel Housing<BR> (2W3204)
3412 INDUSTRIAL AND MARINE ENGINES
Flywheel Housing Bore
3412 INDUSTRIAL AND MARINE ENGINES
Flywheel Housing Runout<BR> Face Runout (axial eccentricity) Of The Flywheel Housing:
3412 INDUSTRIAL AND MARINE ENGINES
Flywheel Housing
3408C and 3412C Marine Engines
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Rear Seal &amp; Wear Sleeve
3408C & 3412C MARINE ENGINES
Flywheel Housing
3408C & 3412C MARINE ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3412 INDUSTRIAL & MARINE ENGINES
Flywheel Housing (Industrial Engine)
3412 INDUSTRIAL & MARINE ENGINES
Flywheel Housing (Marine Engine)
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Pipe Plug Added To Rear Of Cylinder Block Prevents Oil Leakage Into Flywheel Housing{1201}
1981/02/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing{1307}
1978/05/01
Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block{1157,1201}
1979/04/30
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21

Caterpillar Parts SIS Catalog 3412 :

COVER GP-CYLINDER BLOCK
6N-1849 COVER GP-CYLINDER BLOCK
CLUTCH GP
5N-7330 CLUTCH GP
CLUTCH GP
5N-7329 CLUTCH GP
CLUTCH AS
5N-3790 CLUTCH AS
CLUTCH AS
5N-3789 CLUTCH AS
CAMSHAFT GP
4N-0965 CAMSHAFT GP
BRACKET GP-MOUNTING
295-1571 BRACKET GP-MOUNTING
BARRING GP
5R-7425 BARRING GP
COVER GP-FRONT HOUSING
1N-4607 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
4N-6798 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
4W-5388 COVER GP-VALVE MECHANISM
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CYLINDER BLOCK AS
122-2243 CYLINDER BLOCK AS

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.