BASIC ENGINE
MOUNTING GP-ALTERNATORDRIVE GP-PUMP
PAN GP-OIL
PISTON & ROD GP
CYLINDER HEAD GP
POWER TAKE-OFF GP
BASIC ENGINE
MOUNTING GP-ALTERNATOR
#SEBP31790100
7W-4071: MOUNTING GP-ALTERNATOR
7W-4071 MOUNTING GP-ALTERNATOR
S/N 60M8624-UP
FOR USE WITH @@@@@ 6T-1395@@@@@
AN ATTACHMENT
S/N 60M8624-UP
FOR USE WITH @@@@@ 6T-1395@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3N-2704 | [1] | PLATE-MOUNTING | |
| 2. | 4S-5780 | [1] | ROD | |
| 3. | 4W-4640 | [1] | PLATE | |
| 4. | 6H-7062 C | [1] | SPACER (13.5X25X19-MM THK) | |
| 5. | 8S-5383 | [1] | BLOCK | |
| 6. | 107-5818 C | [1] | PULLEY-ALTERNATOR (1-GROOVE) | |
| 7. | 206-2854 C | [1] | BRACKET AS | |
| 8. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 9. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 10. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 11. | 1D-4574 | [1] | BOLT (1/2-13X6-IN) | |
| 12. | 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | |
| 13. | 2S-5658 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| 14. | 4K-0367 | [3] | NUT-FULL (5/8-11-THD) | |
| 15. | 4N-8218 C | [1] | V-BELT (ALTERNATOR) | |
| 16. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 19. | 8S-9191 | [2] | BOLT (3/8-16X4-IN) | |
| 20. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 9X-8874 C | [1] | BOLT (1/2-13X3-IN) | |
| 22. | 9X-8880 | [1] | BOLT (5/8-11X2-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP31790101
7W-4072: MOUNTING GP-ALTERNATOR
7W-4072 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 8M-7892@@@@@, CUSTOMER PROVIDED VOLTMETER OR AMMETER, 1500, 1800 OR 2100 RPM ENGINES
AN ATTACHMENT
FOR USE WITH @@@@@ 8M-7892@@@@@, CUSTOMER PROVIDED VOLTMETER OR AMMETER, 1500, 1800 OR 2100 RPM ENGINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-0602 | [1] | BRACKET AS | |
| 2. | 7N-9664 | [1] | PULLEY-ALTERNATOR (2-GROOVE) | |
| 3. | 9L-6648 | [1] | V-BELT SET (INCLUDES 2-BELTS)(ALTERNATOR) | |
| 4. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 5. | 4K-0367 | [3] | NUT-FULL (5/8-11-THD) | |
| 5P-8247 | [3] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 6. | 4S-5780 | [1] | ROD | |
| 7. | 4W-4640 | [1] | PLATE | |
| 8. | 8S-9191 | [2] | BOLT (3/8-16X4-IN) | |
| 9. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 10. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 8S-5383 | [1] | BLOCK | |
| 12. | 9X-8873 | [1] | BOLT (1/2-13X2.25-IN) | |
| 13. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 9X-8880 | [1] | BOLT (5/8-11X2-IN) | |
| 15. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 16. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| 17. | 2S-5658 | [2] | WASHER-HARD (17X29X3-MM THK) |
#SEBP31790102
4W-9827: MOUNTING GP-HYD PUMP DRIVE
4W-9827 MOUNTING GP-HYD PUMP DRIVE
FOR USE WITH MARINE PROP ONLY
AN ATTACHMENT
FOR USE WITH MARINE PROP ONLY
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-5822 | [1] | ADAPTER | |
| 2. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| 3. | 4W-8689 | [2] | DOWEL-BUSHING | |
| 4. | 4W-8688 | [2] | DOWEL-THREADED (5/16-18-THD) | |
| 5. | 0S-1573 | [8] | BOLT (1/2-13X4-IN) | |
| 6. | 0L-1143 | [8] | BOLT (3/8-16X2.5-IN) | |
| 7. | 9F-6641 | [2] | BOLT (5/16-18X1.25-IN) | |
| 8. | 3L-8049 | [1] | RING-DRIVE |
#SEBP31790103
4N-7182: PAN GP-OIL
4N-7182 PAN GP-OIL -ENGINE
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-0794 | [2] | COVER | |
| 2. | 6N-1396 | [1] | GASKET-OIL PAN | |
| 3. | 7W-3447 | [40] | SPACER (10.2X19.05X10.2-MM THK) | |
| 4. | 239-5572 | [2] | SEAL-INTEGRAL | |
| 5. | 101-8564 | [1] | PAN AS-OIL | |
| 6. | 0S-1571 | [40] | BOLT (3/8-16X1.75-IN) | |
| 7. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 8. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8T-6761 | [3] | PLUG-PIPE (1-11-1/2 NPT THD)(OIL PAN DRAIN) |
#SEBP31790104
4P-1890: PISTON & ROD GP
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-5564 | [1] | PIN-PISTON | |
| 2. | 7E-5665 N | [2] | RETAINER-PIN | |
| 3. | 160-8178 | [1] | ROD AS-CONNECTING | |
| 3A. | 4P-8495 N | [1] | BUSHING | |
| 3B. | 8L-3441 | [2] | NUT (9/16-18-THD) | |
| 3C. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
| 4. | 328-5574 H | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 4W-5702 ABJ | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 ABL | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 5. | 9Y-7212 N | [1] | BODY AS-PISTON | |
| 6. | 346-3340 N | [1] | RING-PISTON (TOP) | |
| 7. | 2P-2817 N | [1] | RING-PISTON (INTERMEDIATE) | |
| 8. | 7N-7078 N | [1] | RING-PISTON (OIL CONTROL) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9Y-6188 ABHPS | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 ABJPS | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 ABLPS | KIT-ROD BEARING (1.27-MM US) | |||
| 442-5359 ABN | [1] | KIT-CYLINDER PACK | ||
| (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| H | KIT MARKED H INCLUDES SIX OF PART MARKED H | |||
| J | KIT MARKED J INCLUDES SIX OF PART MARKED J | |||
| L | KIT MARKED L INCLUDES OF PART MARKED L | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
| P | QTY OF 2 KITS REQUIRED FOR 3412 ENGINE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| S | NOT FOR USE WITH 3408 ENGINE | |||
#SEBP31790105
4P-7472: PISTON & ROD GP
4P-7472 PISTON & ROD GP
S/N 60M6137-7707
14.1:1 RATIO
FOR USE WITH @@@@@442-5354@@@@@
S/N 60M6137-7707
14.1:1 RATIO
FOR USE WITH @@@@@442-5354@@@@@
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 112-2876 N | [1] | BODY AS-PISTON | |
| 2. | 8N-1608 | [1] | PIN-PISTON | |
| 3. | 7E-5665 N | [2] | RETAINER-PIN | |
| 4. | 8N-1728 | [1] | ROD AS-CONNECTING | |
| 4A. | 4P-8495 N | [1] | BUSHING | |
| 4B. | 8L-3441 | [2] | NUT (9/16-18-THD) | |
| 4C. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
| 5. | 9Y-9497 H | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 4W-5702 ABJ | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 ABL | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 6. | 1W-9460 N | [1] | RING-PISTON (TOP) | |
| 7. | 2P-2817 N | [1] | RING-PISTON (INTERMEDIATE) | |
| 8. | 7N-7078 N | [1] | RING-PISTON (OIL CONTROL) | |
| 9. | 168-4538 | [1] | JET AS-PISTON COOLING | |
| 10. | 150-1156 | [1] | BOLT-SPECIAL (OIL JET) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9Y-6188 ABHPS | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 ABJPS | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 ABLPS | KIT-ROD BEARING (1.27-MM US) | |||
| 442-5354 ABN | [1] | KIT-CYLINDER PACK | ||
| (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| H | KIT MARKED H INCLUDES SIX OF PART MARKED H | |||
| J | KIT MARKED J INCLUDES SIX OF PART MARKED J | |||
| L | KIT MARKED L INCLUDES SIX OF PART MARKED L | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
| P | QTY OF 2 KITS REQUIRED FOR 3412 ENGINE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| S | NOT FOR USE WITH 3408 | |||
#SEBP31790106
4P-7472: PISTON & ROD GP
4P-7472 PISTON & ROD GP
S/N 60M7708-8500
14.1:1 RATIO
FOR USE WITH @@@@@442-5354@@@@@
S/N 60M7708-8500
14.1:1 RATIO
FOR USE WITH @@@@@442-5354@@@@@
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-6102 CJ | [1] | BODY AS-PISTON | |
| 2. | 8N-1608 | [1] | PIN-PISTON | |
| 3. | 7E-5665 J | [2] | RETAINER-PIN | |
| 4. | 160-8178 | [1] | ROD AS-CONNECTING | |
| 4A. | 4P-8495 J | [1] | BUSHING | |
| 4B. | 5P-0540 | [2] | NUT-HEX FULL (9/16-18-THD) | |
| 4C. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
| 5. | 328-5574 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 6. | 346-3340 J | [1] | RING-PISTON (TOP) | |
| 7. | 2P-2817 J | [1] | RING-PISTON (INTERMEDIATE) | |
| 8. | 7N-7078 J | [1] | RING-PISTON (OIL CONTROL) | |
| 9. | 168-4538 | [1] | JET AS-PISTON COOLING | |
| 10. | 150-1156 | [1] | BOLT-SPECIAL (OIL JET) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 442-5354 ABJ | [1] | KIT-CYLINDER PACK | ||
| (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP31790107
273-8668: PLUG GP-CYLINDER HEAD
273-8668 PLUG GP-CYLINDER HEAD
S/N 60M11276-UP
S/N 60M11276-UP
For full view, you need register
#SEBP31790108
4W-9829: POWER TAKE-OFF GP
4W-9829 POWER TAKE-OFF GP
PROVIDES SPREAD BEARING SINGLE PLATE FRONT ENCLOSED CLUTCH
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
PROVIDES SPREAD BEARING SINGLE PLATE FRONT ENCLOSED CLUTCH
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-5822 | [1] | ADAPTER | |
| 2. | 0S-1594 | [12] | BOLT (3/8-16X1-IN) | |
| 3. | 5N-7329 Y | [1] | CLUTCH GP | |
| 4. | 5N-6958 | [1] | CHANNEL | |
| 5. | 0S-1566 | [2] | BOLT (5/8-11X1.5-IN) | |
| 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 6. | 0S-1591 | [12] | BOLT (3/8-16X1.5-IN) | |
| 7. | 0S-1573 | [8] | BOLT (1/2-13X4-IN) | |
| 8. | 4W-8688 | [2] | DOWEL-THREADED (5/16-18-THD) | |
| 9. | 4W-8689 | [2] | DOWEL-BUSHING | |
| 10. | 9F-6641 | [2] | BOLT (5/16-18X1.25-IN) | |
| 11. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790109
4W-9830: POWER TAKE-OFF GP
4W-9830 POWER TAKE-OFF GP
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-5822 | [1] | ADAPTER | |
| 2. | 0S-1594 | [12] | BOLT (3/8-16X1-IN) | |
| -OR- | ||||
| 0S-1591 C | [12] | BOLT (3/8-16X1.5-IN) | ||
| 3. | 5N-7330 Y | [1] | CLUTCH GP | |
| 4. | 5N-6958 | [1] | CHANNEL | |
| 5. | 0S-1566 | [2] | BOLT (5/8-11X1.5-IN) | |
| 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 6. | 0L-1143 | [8] | BOLT (3/8-16X2.5-IN) | |
| 7. | 0S-1573 | [8] | BOLT (1/2-13X4-IN) | |
| 8. | 4W-8688 | [2] | DOWEL-THREADED (5/16-18-THD) | |
| 9. | 4W-8689 | [2] | DOWEL-BUSHING | |
| 10. | 9F-6641 | [2] | BOLT (5/16-18X1.25-IN) | |
| 11. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 3412 :
Truck sale:
95,720
96,795
93,569
60,000
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
159,600
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY