AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-1232 TURBOCHARGER GP PART OF 4P-9354, 5N-9578 KIT-ENGINE PARTS FIELD REPLACEMENT FOR @@@@@ 7C-2731@@@@@ AN ATTACHMENT AND FIELD INSTALLATION 3412


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412C Marine Engine 60M05161-UP SEBP3179 3412 60M   (1976)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
4W-1148 TURBOCHARGER GP
TURBOCHARGER GP
4W-1226 TURBOCHARGER GP
TURBOCHARGER GP
4W-1232 TURBOCHARGER GP
TURBOCHARGER GP
4W-2939 TURBOCHARGER GP
TURBOCHARGER GP
4W-7637 TURBOCHARGER GP
TURBOCHARGER GP
6N-2020 TURBOCHARGER GP
 

#SEBP31790280
 

4W-1232: TURBOCHARGER GP

4W-1232 TURBOCHARGER GP
PART OF 4P-9354, 5N-9578 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@ 7C-2731@@@@@
AN ATTACHMENT AND FIELD INSTALLATION
i00378601 SEBP3179
4W1232 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3087 [1] HOUSING-COMPRESSOR  
2. 1N-3279 [1] CLAMP AS (COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
3. 4W-1225 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  1N-3259 [4] PLATE-LOCK  
5. 1W-7770 [1] HOUSING AS-TURBINE  
6. 4N-0932 B [4] PLUG-CUP (57.53-MM OD)(STANDARD)  
  100-6816 B [4] PLUG-CUP (60.71-MM OD)(ALTERNATE)  
7. 3B-0645 B [3] PLUG-CUP (32.08-MM OD)(STANDARD)  
  3P-1896 B [3] PLUG-CUP (35.31-MM OD)(ALTERNATE)  
8. 1N-3260 [4] CLAMP (TURBINE)  
9. 3B-0551 [5] PLUG-PIPE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790281
 

4W-2939: TURBOCHARGER GP

4W-2939 TURBOCHARGER GP -WATERCOOLED
i00378924 SEBP3179
4W2939 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1148 Y [1] TURBOCHARGER GP  
2. 3E-6916 [4] NUT-FULL (3/8-16-THD)  
3. 7M-7273 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790282
 

4W-7637: TURBOCHARGER GP

4W-7637 TURBOCHARGER GP
PART OF 4P-9351 KIT-ENGINE PARTS
AN ATTACHMENT
i00380313 SEBP3179
4W7637 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2039 [1] CLAMP AS (COMPRESSOR)  
2. 9N-2038 [1] CLAMP AS-TURBINE  
3. 1B-5174 [3] PLUG-PIPE  
4. 4W-4540 [1] HOUSING-COMPRESSOR  
5. 7W-0489 Y [1] CARTRIDGE GP-TURBOCHARGER  
6. 4W-7636 [1] HOUSING AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790283
 

6N-2020: TURBOCHARGER GP

6N-2020 TURBOCHARGER GP
S/N 60M5161-8500
PART OF 131-5517, 131-5518, 4P-9353, 5N-1715 KIT-ENGINE PARTS, 4N-2767 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00406616 SEBP3179
6N2020 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-3905 [1] COVER-COMPRESSOR  
2. 7M-9916 [1] CLAMP AS (COMPRESSOR)  
3. 7N-6179 [1] HOUSING AS-TURBINE  
4. 3B-0551 [4] PLUG-PIPE  
5. 1B-5174 [4] PLUG-PIPE  
6. 5S-4517 [1] CLAMP AS (TURBINE)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
7. 6N-3902 Y [1] CARTRIDGE GP-TURBOCHARGER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790284
 

7C-0693: TURBOCHARGER GP

7C-0693 TURBOCHARGER GP
S/N 60M5161-8500
i00398087 SEBP3179
7C0693 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2731 CY [1] TURBOCHARGER GP  
2. 7M-7273 [1] GASKET  
3. 8M-2296 [4] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790285
 

7C-2731: TURBOCHARGER GP

7C-2731 TURBOCHARGER GP
PART OF 7C-0693 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 4W-1232@@@@@
i00403965 SEBP3179
7C2731 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3087 [1] HOUSING-COMPRESSOR  
2. 1N-3279 [1] CLAMP AS (COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
3. 4W-1225 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  1N-3259 [4] PLATE-LOCK  
5. 1W-7770 [1] HOUSING AS-TURBINE  
6. 4N-0932 [4] PLUG-CUP (57.53-MM OD)  
7. 3B-0645 [3] PLUG-CUP (32.08-MM OD)  
8. 1N-3260 [4] CLAMP (TURBINE)  
9. 3B-0551 [7] PLUG-PIPE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790286
 

7C-6703: TURBOCHARGER GP

7C-6703 TURBOCHARGER GP
S/N 60M5161-8500
PART OF 4P-9356, 5N-8530 KIT-ENGINE PARTS, 1N-4776 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00386785 SEBP3179
7C6703 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8123 [1] COVER-COMPRESSOR  
3. 2S-1304 [1] CLAMP AS (COMPRESSOR)  
4. 5S-4517 [1] CLAMP AS (TURBINE)  
6. 7C-6705 [1] HOUSING AS (TURBINE)  
7. 3B-0551 [4] PLUG-PIPE  
8. 9L-8412 [7] PLUG-PIPE  
9. 4N-7601 Y [1] CARTRIDGE GP-TURBOCHARGER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790287
 

5N-3220: ACTUATOR GP-AIR

5N-3220 ACTUATOR GP-AIR -GOVERNOR CONTROL
PART OF 3N-8029 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00384777 SEBP3179
5N3220 ACTUATOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [4] BOLT (3/8-16X3-IN)  
  3B-4506 [4] LOCKWASHER  
2. 8F-8454 [1] ORIFICE  
3. 1B-4201 [4] NUT-FULL (1/4-28-THD)  
    -OR-
  6V-8185 C [4] NUT (1/4-20-THD)  
4. 5P-0537 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 9F-0978 [1] CLAMP AS-DIAPHRAGM  
6. 2W-0956 C [1] CLAMP AS-DIAPHRAGM  
7. 3B-4504 [3] LOCKWASHER  
8. 7F-9958 [1] SPRING  
9. 2L-7287 [1] HOUSING-ACTUATOR  
10. 3N-9096 C [1] NUT-RETAINER  
11. 6V-8185 [3] NUT (1/4-20-THD)  
12. 2L-6726 [1] RING-RETAINING  
13. 5N-3219 [1] SHAFT  
14. 011-3580 C [2] SETSCREW-SQUARE HEAD  
15. 5K-0906 [1] BOLT (5/16-18X0.625-IN)  
  3F-9556 [1] LOCKWASHER  
16. 2N-6005 [1] SPRING  
17. 2L-6744 [1] PLUNGER  
18. 2L-7289 [1] HOUSING-END  
19. 112-5360 [1] DIAPHRAGM  
20. 9F-0981 [1] GUIDE-DIAPHRAGM  
21. 6V-8801 C [2] NUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31790288
 

1W-5889: CONTROL GP-FUEL RATIO

1W-5889 CONTROL GP-FUEL RATIO
FOR USE WITH 746 KW MARINE ENGINE
AN ATTACHMENT
i00352604 SEBP3179
1W5889 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-5008 [1] ELBOW-PIPE  
2. 3N-7268 I [1] HOSE AS  
3. 8M-2773 [2] CLIP (LOOP)  
4. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 2N-1287 [1] ELBOW-FLARED  
7. 2P-8643 [1] GASKET  
8. 2W-3157 Y [1] CONTROL GP-FUEL RATIO  
9. 4N-8112 [2] BOLT (5/16-18X3.250-IN)  
10. 3B-4505 [2] LOCKWASHER  
11. 8F-7242 [2] WASHER (8.7X15.9X1.6-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP31790289
 

2W-3157: CONTROL GP-FUEL RATIO

2W-3157 CONTROL GP-FUEL RATIO
PART OF 1W-5889, 6N-6209, 8N-5021 CONTROL GP-FUEL RATIO
ALSO AN ATTACHMENT
i00107870 SEBP3179
2W3157 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3156 [1] VALVE AS-LIMITER (FUEL RATIO CONTROL)  
2. 2P-8225 [1] HOUSING-DIAPHRAGM  
3. 4P-1639 C [1] SEAL-CONTROL  
4. 4P-0246 C [1] VALVE (FUEL CHECK)  
5. 1W-2567 [1] RETAINER-SPRING  
6. 7N-0209 [1] SPRING (OUTER)  
7. 6N-0515 [1] SPRING (INNER)  
8. 110-2469 [1] EXTENSION  
9. 124-4668 [1] GASKET-FUEL RATIO CONTROL  
10. 125-8828 [1] COVER-FUEL RATIO CONTROL  
11. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
12. 110-2468 [1] RETAINER  
13. 2P-8226 [1] COVER-DIAPHRAGM  
14. 6N-0513 [1] SPRING  
15. 2P-8803 [1] WASHER (1.094X1.883X0.036-IN THK)  
16. 1W-4797 [1] DIAPHRAGM  
17. 5B-7040 [3] BOLT (1/4-20X1-IN)  
18. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 4B-3388 [2] BOLT (5/16-18X1.125-IN)  
20. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
21. 9N-1754 C [1] SPRING  
22. 3E-6760 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel
1981/11/25
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Tightening Procedure For Turbocharger Compressor Nut
1989/09/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/07/04
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Air An Exhaust Lines
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger Impeller Installation
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger T12
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TW81
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TV81
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TW91
3412 INDUSTRIAL AND MARINE ENGINES
Turbochargers F452, F555 & F552
3412 INDUSTRIAL AND MARINE ENGINES
Turbochargers 4MFW and 4MF
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger
3408C and 3412C Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS
CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3408C & 3412C MARINE ENGINES
Turbocharger (Industrial Engine)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger (Marine Engine)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger (T12)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel{1052}
1981/11/09
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Clip Now Used To Hold Coolant Line For The Turbocharger{1052,1380}
1977/02/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3412 :

TURBOCHARGER GP
4W-1226 TURBOCHARGER GP
TURBOCHARGER GP
4W-1148 TURBOCHARGER GP
TURBOCHARGER GP
4N-2767 TURBOCHARGER GP
TURBOCHARGER GP
1W-5285 TURBOCHARGER GP
TURBOCHARGER GP
1N-4776 TURBOCHARGER GP
SHUTOFF GP-AIR
3N-9118 SHUTOFF GP-AIR
SHUTOFF GP-AIR
3N-8164 SHUTOFF GP-AIR
SHIELD GP-MANIFOLD
9Y-3322 SHIELD GP-MANIFOLD
TURBOCHARGER GP
4W-2939 TURBOCHARGER GP
TURBOCHARGER GP
4W-7637 TURBOCHARGER GP
TURBOCHARGER GP
6N-2020 TURBOCHARGER GP
TURBOCHARGER GP
7C-0693 TURBOCHARGER GP
TURBOCHARGER GP
7C-2731 TURBOCHARGER GP
TURBOCHARGER GP
7C-6703 TURBOCHARGER GP
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
CONTROL GP-FUEL RATIO
1W-5889 CONTROL GP-FUEL RATIO

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.